anotheruselesslogon Posted July 22, 2014 Share Posted July 22, 2014 (edited) Hi, I have skse (1.7.1) crashing my game (no error, just ctd). If I start a new game it crashes about when I reach the Guardian Stones on my way to Riverwood. I can save my game before I get there and after it crashes I can reload and use the standing stones and continue to Riverwood. However it crashes again after about the same time it takes to run through the intro. I haven't timed it but it always seems to crash after the same (real) time has passed. I want to use skse for SkyUI. In the interests of troubleshooting, below is my load order for a working (non crashing) game without using skse. If I run the game using skse and the below mods it crashes. If I run skse with only the basics (Skyrim.esm and update.esm) it crashes. Load order:Skyrim.esmUpdate.esmUnofficial Skyrim Patch.espDawnguard.esmUnofficial Dawnguard Patch.espDragonborn.esmUnofficial Dragonborn Patch.esp I have tried running skse as Administrator. All the skse files including scripts are copied over. When using skse with SkyUI, SkyUI works fine up until the crash. Anyone have a similar problem and hopefully found a fix for it? Thanks. Geforce GTX 770MIntel i7-47008GB RAMWindows 8.1 EDIT:Papyrus log - not much to show. [07/22/2014 - 02:29:46PM] Papyrus log opened (PC)[07/22/2014 - 02:29:46PM] error: Native function GetUseSound in empty state does not match existing signature on linked type Potion. Function will not be bound.[07/22/2014 - 02:29:46PM] Update budget: 1.200000ms (Extra tasklet budget: 1.200000ms, Load screen budget: 500.000000ms)[07/22/2014 - 02:29:46PM] Memory page: 128 (min) 512 (max) 76800 (max total)[07/22/2014 - 02:30:03PM] DLC1: Starting DLC1 Initialization quest.[07/22/2014 - 02:30:03PM] [DLC2_QF_DLC2_MQ04_02016E02 <DLC2Init (05016E02)>] DLC2Init quest START[07/22/2014 - 02:30:03PM] PATCH 1.6 QUEST HAS STARTED[07/22/2014 - 02:30:03PM] PATCH 1.5 QUEST HAS STARTED[07/22/2014 - 02:30:03PM] PATCH 1.9 QUEST HAS STARTED[07/22/2014 - 02:30:04PM] error: File "HearthFires.esm" does not exist or is not currently loaded.stack: <unknown self>.Game.GetFormFromFile() - "<native>" Line ? [alias Player on quest DLC2Init (05016E02)].DLC2InitCrossDLCScript.OnPlayerLoadGame() - "DLC2InitCrossDLCScript.psc" Line 39 [DLC2Init (05016E02)].DLC2_QF_DLC2_MQ04_02016E02.Fragment_2() - "DLC2_QF_DLC2_MQ04_02016E02.psc" Line 296[07/22/2014 - 02:30:06PM] [DLC2_QF_DLC2_MQ04_02016E02 <DLC2Init (05016E02)>] DLC2Init quest DONE[07/22/2014 - 02:30:06PM] PATCH 1.4 QUEST HAS STARTED[07/22/2014 - 02:30:07PM] DLC1: DLC1 Initialization quest done.[07/22/2014 - 02:34:02PM] VM is freezing...[07/22/2014 - 02:34:02PM] VM is frozen[07/22/2014 - 02:34:03PM] Saving game...[07/22/2014 - 02:34:03PM] VM is thawing...[07/22/2014 - 02:35:31PM] VM is freezing...[07/22/2014 - 02:35:31PM] VM is frozen[07/22/2014 - 02:35:32PM] Saving game...[07/22/2014 - 02:35:32PM] VM is thawing...[07/22/2014 - 02:50:03PM] Info: *Achievement 1 awarded - a winnar is you!* Edited July 22, 2014 by anotheruselesslogon Link to comment Share on other sites More sharing options...
Ball11 Posted July 22, 2014 Share Posted July 22, 2014 Try SSME. Link to comment Share on other sites More sharing options...
anotheruselesslogon Posted July 22, 2014 Author Share Posted July 22, 2014 (edited) Normally my favourite two word phrase is 's*** Happens'. At the moment though it is 'Try SSME'! It worked! Thanks Ball11. Scratch all that. It seemed to work at first, allowing me to get much further. Now however I cannot load the save game I made. When I start a new game it crashes upon leaving the cave. Looks like I'll have to do without skse until it gets fixed. Are there any decent UI mods that don't need skse? Edited July 22, 2014 by anotheruselesslogon Link to comment Share on other sites More sharing options...
Xelan255 Posted July 22, 2014 Share Posted July 22, 2014 (edited) there may be, just browse the nexus. but how decent they are.. no idea, I'm using SkyUI since forever, like the majority of players. Oh, and I wonder, what's that about the Hearthfires.esp? It isn't in your loadorder, but the game seems to expect it? Had you installed Hearthfire and deletet it or something? Edited July 22, 2014 by Xelan255 Link to comment Share on other sites More sharing options...
Verschleiert1 Posted July 22, 2014 Share Posted July 22, 2014 there may be, just browse the nexus. but how decent they are.. no idea, I'm using SkyUI since forever, like the majority of players. Oh, and I wonder, what's that about the Hearthfires.esp? It isn't in your loadorder, but the game seems to expect it? Had you installed Hearthfire and deletet it or something?Wouldn't be relevant. I found the cause for your crash, anotheruselesslogon. [07/22/2014 - 02:50:03PM] Info: *Achievement 1 awarded - a winnar is you!* <---- This refers to the mod AchieveThat!Your loadorder does not contain the necessary file "Achieve That.esp" to run the mod properly.Please check the box for your plugin to be able to load and you should be good to go.If your intention was to deinstall this mod, please download the mod manually again, check every file you find in the downloaded archive against your files installed in the Data/* folder/s and remove them manually.After that you will have to either start over with a clean save game, because your old savefile still contains the edits from the AchieveThat! -scripts or you reinstall the mod and then disable the mod ingame in the MCM menu, close the game and deinstall it again. Link to comment Share on other sites More sharing options...
Xelan255 Posted July 22, 2014 Share Posted July 22, 2014 Ah, had that in mind and thought: nah, doesn't have that mod, must be something else.Archieve That! comes with an uninstall option (ingame), so you have to install Archieve That! again and use that option (in case you are sure you don't want to keep it) to uninstall the scripts and then you can uninstall the mod via your manager. Link to comment Share on other sites More sharing options...
RPGXOmega Posted July 23, 2014 Share Posted July 23, 2014 My problem was the SKSE.ini itself. This topic led me to thinking that. Thanks. I deleted everything in SKSE.ini besides the CLEARINVALID and now my Skyrim loads. ^_^ Link to comment Share on other sites More sharing options...
anotheruselesslogon Posted July 26, 2014 Author Share Posted July 26, 2014 (edited) Interesting. I've never even heard of the AchieveThat! mod let alone ever installed it. I also have never had hearthfire. I do not have a skse.ini. Is this necessary or only needed for certain tweaks? Thanks for your responses. Edited July 26, 2014 by anotheruselesslogon Link to comment Share on other sites More sharing options...
Lazonby Posted July 26, 2014 Share Posted July 26, 2014 SKSE has never given me problems, across multiple new starts, as well as multiple installs. How and why do you think SKSE is at fault for your problems? First of all, you need to clean Update.esm with TES5Edit, along with Dawnguard.esm and Dragonborn.esm. If that doesn't work, try disabling ALL of the Unofficial patches, at least until you can get to Whiterun. The area from the cave exit to Riverwood to Whiterun is very CTD prone for some reason. At the very least, you need LOOT for proper load order and TES5Edit fo clean mods and to make sure the mods will load properly. These are both essential tools if you plan to mod. Link to comment Share on other sites More sharing options...
Craytose Posted May 20, 2015 Share Posted May 20, 2015 My problem was the SKSE.ini itself. This topic led me to thinking that. Thanks. I deleted everything in SKSE.ini besides the CLEARINVALID and now my Skyrim loads. ^_^ This, this, this right here, holy crap this is it!!! Give this fella a cookie, or a beer, or whatever he wants! Thank you dude! Link to comment Share on other sites More sharing options...
Recommended Posts