Jump to content

Photo

Joy of Perspective - Dragonborn Compatability


  • Please log in to reply
25 replies to this topic

#11
clickok80

clickok80

    Journeyman

  • Members
  • Pip
  • 44 posts
I can't get this to work either. I have both JoP v09 and your mod in load order. I'm using UNP and exeter's meshes for UNP. I'm also using Skyre if that makes a difference. Vanilla armors still work, but I consoled and equipped the dragonborn armors bonemold and nordic carved and it's arms only. using a different patch mod, I get Immersive armors to work, but not this.

#12
crusader12k

crusader12k

    Journeyman

  • Members
  • Pip
  • 22 posts
In response to post #8470637.

I'll explain again, this only converts the meshes of the vanilla Dragonborn armors. Any UNP conversions for those armors, anything at all that changes their meshes, will cause this not to work. Immersive armors is an example of a mesh conversion which has been patched, and therefore will work with JoP (the patch mods lists all the conversion which are supported).

Try turning off every armor mod you have, just to be certain that only vanilla armors are in game (don't save or anything, just test). If it still doesn't work, than post back. I realize it is painful to give up UNP meshes, but until someone does the work to convert UNP meshes for DB, you will have to choose whether you want one or the other.

#13
clickok80

clickok80

    Journeyman

  • Members
  • Pip
  • 44 posts
In response to post #8470637. #8482122 is also a reply to the same post.

Sorry, I looked through the posts for similar responses but didn't see anything. I disabled all UNP and it still was invisible. I have the dawnguard conversion patch, and also the immersive armors patch and they both work along with the vanilla armors. http://skyrim.nexusmods.com/mods/26362//? They work with UNP and exeter's meshes. I would gladly play with this over the UNP meshes but it just doesn't work. Thanks for your feedback :)

#14
crusader12k

crusader12k

    Journeyman

  • Members
  • Pip
  • 22 posts
In response to post #8470637. #8482122, #8507875 are all replies on the same post.

Hmm, well I know it works with current patch etc. Would you mind posting a screenshot of your Mod Manager with the view set to show all (not tabbed). I might be able to point out a conflict, or learn something to help me make this more versatile.

#15
Okusar

Okusar

    Stranger

  • Members
  • Pip
  • 4 posts

I also can't get this to work. I don't believe it is due to a mod conflict since as a test I tried disabling every other esp, save for the masters, Joy of Perspective (v06) and the compatibility patches for Dawnguard and Dragonborn. All the vanilla armors work but as soon as I equip Nordic Carved Armor my torso still vanishes. I do still have a number of non-esp-based mods installed however (SeveNBase body with XP32 Maximum Skeleton for JoP, Sharpshooter's Original ENB, and a number of high resolution texture packs) but no armor mods of any kind, save for retextures - none of which include the Nordic set. I haven't tested the other Dragonborn armors.



#16
souldier777

souldier777

    Stranger

  • Members
  • Pip
  • 1 posts
how in the f***k could this not be working for me if it works for you, i must be doing something wrong!!!!!! oh well if you get any new imformation of whats wronglet me know:)

#17
clickok80

clickok80

    Journeyman

  • Members
  • Pip
  • 44 posts
In response to post #8470637. #8482122, #8507875, #8684262 are all replies on the same post.

Oh hi. I didn't see your response. I gave up on TJoP for now because it's buggy with archery and stealth still. I was actually going to redo all my mods anyway and went for it. I tested this out with absolutely no mods on a fresh install. It did not work. My load order was just .esms and TJoP then yours. I have no doubt it works for you, but it doesn't work for me. I will check back when TJoP is finalized. Anyway, good luck and thanks for the effort.

#18
crusader12k

crusader12k

    Journeyman

  • Members
  • Pip
  • 22 posts
In response to post #8470637. #8482122, #8507875, #8684262, #8866649 are all replies on the same post.

That is bizarre. But if you ever want to try it again, may I recommend placing it last in load order? That way it doesn't get overridden by anything else. Just make sure the base mod comes first. If that doesn't do it, than I have no idea. Sorry.

#19
crusader12k

crusader12k

    Journeyman

  • Members
  • Pip
  • 22 posts
Okay, enough people have stated they can't get it to work that I'll mess around with it and try to break it. Maybe I can figure stuff out :/ University is starting back up though, so I'm afraid a little more patience will be needed. If you're really desperate, it'd probably be faster to convert the armor yourself, because it is fairly simple.


#20
Okusar

Okusar

    Stranger

  • Members
  • Pip
  • 4 posts

I took your advice and researched how to manually convert armors. I used BSA Unpacker to browse to meshes/dlc02/armor/nordiccarved and extract nordiccarvedcuirassf_0.nif and nordiccarvedcuirassf_1.nif files and rename them to 1stpersonnordiccarvedcuirassf_0.nif and 1stpersonnordiccarvedcuirassf_1.nif, respectively. I then created a folder placed the files in ..\Skyrim\Data\meshes\dlc02\armor\nordiccarved and I now have the Nordic Carved Armor working correctly with The Joy of Perspective. Once I start progressing through the Dragonborn quest line I will do the same to fix any other armors I find that are not showing correctly - at least until such time that the Dragonborn Compatibility patch is updated.






Page loaded in: 1.057 seconds