firemanaf

Hi, That does look too red. What weather mod are you using? What lighting mod are you using ? If using ELFX make sure you don't use the weather plugin option. I also find if using RLO reds are more pronounced on light sources. Although, that doesn't effect sun lighting. You are only using one of my main files not both correct? Meaning not using my reshade plus enb. Also was it only that particular weather that was too red? I can't adjust for each weather. Feel free to message me on my mod page just in case I miss a reply here.

I remember reading somewhere for a mod, can't remember which, might of been frostfall but, its a certain equipment worn can cause this. Try swapping out all your equipment and see if it works.

You serious or pulling my leg? He mean 24hrs game time, not real life. Just wait 24hrs and you should start seeing effects of CoT start kicking in.

You should install Project ENB manually. Not through Nexus that can cause issues. Here is a video on how to install. http://www.youtube.com/watch?v=EDtKhLCJneY

You need to watch this video. http://www.youtube.com/watch?v=UfR2Sts6jXM It explaines about the reproccer and Balbor and Steelsouls SkyRe ReProccer Project mods. With the balbor mod just make sure to select the immersive weapons/armors selections when installing. Anyways watch the video he explains a lot better than I could. When ever you add new mods like that you will have to run the reproccer to get the stats right.

Above is right a lot of ENBs out there. Me I love Project ENB. While a popular one I still very much like it. It has multiple presents, one being Cinematic. But also different performance level settings as well. Here is some screenshots. These are using the realistic profile.

Did you run the Reproc after downloading Immersive Weapons? If not you need to do that. Also are you using this? http://skyrim.nexusmods.com/mods/27092/? if not you need to install and select the Immersive Weapons selection then run the Reproc. If you already have it you may need to rerun the install and select Immersive Weapons. http://www.youtube.com/watch?v=UfR2Sts6jXM here is an install video that will show you.

Skyboost I heard is really not good to use now. It can cause major issues since the latest patches of Skyrim have been updated. Try this for you texture mods http://skyrim.nexusmods.com/mods/12801/? Also this http://skyrim.nexusmods.com/mods/32505/? And this http://skyrim.nexusmods.com/mods/6387/? There are youtube videos on how to use the texture optimizer.

If you select windowed mode make sure to reset the resolution back to what you had; in the Skyrim Launcher not through SKSE.

When I first installed Skyrim on my computer and installed mods, I tried an ENB, But killed my framerate. I uninstalled it. But after doing some research I learned about adjusting Skyrimprefs and such. I can now run my mods and project enb with SSAO on at 30-40 FPS outside. Disable AF and AA in skyrim setting and use ENB for that. Also project ENB I am using uses Sweetfx and you can use AA for that. I disable Vsync and use Nvidia Inspector to lock my FPS at 59 or you can use the ENB to lock FPS. You can change the Primary and Secondary Resolutions in the Skyrimprefs will help as well. Also before using an ENB playing in Windowed Mode was better for performance. Now using ENB I get better performance not using windowed mode. If you end up using an ENB disable the SSAO, DOF and Reflections. Skylighting is a big hitter as well.

I am using Climates of Tamriel Nights lvl 4, warm interior setting and hazardous dungeons. You can go all the way to lvl 8 nights and hardcore dungeons with Climates of Tamriel. I went with lvl 4 nights and hardcore dungeons because while darker I can still see a bit, especially when I am about to be attacked. I tried lvl 8 nights and I wouldn't see enemy before its too late, bad idea with SkyRe. Also using with Project ENB and Enhanced Lights and FX.

I was using ENboost and then switched to v 0.199 with ENBoost and had all kinds of lagging issues. Then I switched to v0.132 with project ENB issue went away. Actually had very good performance with using an ENB about 40FPS outside never dropping below 30. Than I learned about switching back to driver 314.22 for my NVIDIA graphics card and been running pretty good since. Actually made a thread about that and someone thought it couldn't be. But I had horrible performance with ENBoost.

I was having that issue yesterday. I found it to be RLO. Switched to Enhanced Lights and FX and no issue.

I would try v0.199 again but Project ENB does not use that one and he has not made the changes to use that yet. Maybe after the summer he may return to fixing his ENB to run on v0.199. Never told you to switch to it. Just posted this to give an idea to some that have issues. If you happy with your setup, good for you, keep it. It wasn't for me so I seeked to find the answer. This maybe a temporary fix while I use Project ENB. If I decide to change ENBs than I will update my driver again and use the new v0.199.

Watch this video. I used this. Even though I use Project ENB and you may not its still the same premise. Just always refer to the mod installation instructions just in case. http://www.youtube.com/watch?v=EDtKhLCJneY