Jump to content

Inverted Corner Walls


NavaroBL

Recommended Posts

NavaroBL - Hello!

I'm not sure which wall piece that is but there's often a corresponding floor piece with a corner type thin column built into it that completes corners like that by capping the gap.

For example the Office kit pieces have:

OffRmCorOutWallL01

They normally use CorOut to denote them & come in various versions depending on which corner they are for.

 

There may also be a corner wall piece that's used for joining two straight walls.

You can sift out all the kit pieces for the kit you are using by entering it's prefix into the Filter box in GECK's object window.

For example to find all the office kit for the piece I mentioned I'd put OffRm into the filter.

If you can't find pieces like that, check to see how Bethesda used that segment.

To do that right click on the wall piece in GECK's Object Window & select "Use Info", a window will open with all the instances in game of where that piece is used.

Clicking on one of the locations will take you there & you can see how the piece was set up.

If all else is unsuitable, you can place a Column or pillar at the gap, it's often a handy solution for custom builds.

There are many columns & pillars that can be used & they can also be scaled to fit.

Type column into the Filter box in the Object Window, or pillar to find one that fits in with your setting.

Many a visible seam or gap has been hidden by a column. :wink:

Hope this helps!

Prensa

Edited by prensa
Link to comment
Share on other sites

Thanks for the reply guys, I'll try out some stuff that you suggested.

 

I recently came across exactly the same issue, my suggestion would be either a camp log from the static list, or the column form the basement, type basrmfree into the filter box.

This worked swell! Thanks man. :laugh:

Edited by NavaroBL
Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...