Derethim Posted October 21, 2015 Share Posted October 21, 2015 Basically, I've tried installing Oblivion Reloaded as soon as I figured out how to remove the combat and camera additions, which were REALLY annoying. It could use a better readme.Anyways, I've tried installing OBGE v3 first, then Skirimized Water after I got rid of OBGE, but I wasn't content. I also tried using Tweaked ENB, which worked surprisingly well with both OBGE and Reloaded.Also did some LOD changes. Basically, the order of what I did was ... 1. Installed Tweaked ENB (Worked perfectly)2. Installed OBGE (Worked pretty well)3. Installed Skirimized Waters (Wroked great)4. Installed some LOD mods using the simple and great TES4LOD4. Removed Skirimized Waters and installed Liquid Waters (Problem appeared and persists until now)5. Panicked.6. Removed Liquid Waters, unchecked OBGE plugins7. Problem persisted, I googled, that there are some issues with old OBGE v38. ... so I installed Oblivion Reloaded9. Oblivion Reloaded works perfectly, except for the persisiting problem, which persisted since step 4.10. Fixed my load order, it's almost flawless, checked for conflicting mods, no change!!! This is why I didn't post it here, the problem is somewhere else.11. Started a clean save, no change12. Tried messing around with water mods, tried disabling every esp. No change!13. Posted, this and added screens, this is what the problem looks like: 1. It persists inside - notice the lightning gltiching through the walls:http://i58.tinypic.com/357r6oi.jpg 2. What it looks like outside:http://i57.tinypic.com/6q8cnb.jpg 3. Underwater is fine:http://i59.tinypic.com/1zzm995.jpg PLEASE! Help me, I really don't wanna install things all over again. It took me 4 hours to get things running and I really have no other issues with Reloaded OR any other mod :/Help. I would really like to play Oblivion again today! ^^ Link to comment Share on other sites More sharing options...
Derethim Posted October 21, 2015 Author Share Posted October 21, 2015 I should probably add, that the film persists even outside of water, but you can see that in the first photo. Link to comment Share on other sites More sharing options...
olha2 Posted October 21, 2015 Share Posted October 21, 2015 OBGE and OR are not compatible. Ill read the rest of your post in 30 mins. GTG Link to comment Share on other sites More sharing options...
Derethim Posted October 21, 2015 Author Share Posted October 21, 2015 (edited) OBGE and OR are not compatible. Ill read the rest of your post in 30 mins. GTGI know, I switched from OBGE to ORI should also say, that the black line that covers half of the screen stays, unless im in water. Thanks for replying at least, was checking in every hour VERY important detail: Opening console makes the black thing dissapear. Water stil not present. Edited October 21, 2015 by Derethim Link to comment Share on other sites More sharing options...
olha2 Posted October 21, 2015 Share Posted October 21, 2015 OBGE and OR are not compatible. Ill read the rest of your post in 30 mins. GTGI know, I switched from OBGE to ORI should also say, that the black line that covers half of the screen stays, unless im in water. Thanks for replying at least, was checking in every hour VERY important detail: Opening console makes the black thing dissapear. Water stil not present. VERY important detail: Opening console makes the black thing dissapear. Water stil not present. open the console and type: TS', close console, and type again: 'TS' If that does not fix it disable HDR. Also try running the game without OBSE see if problem persists. Link to comment Share on other sites More sharing options...
Derethim Posted October 21, 2015 Author Share Posted October 21, 2015 OBGE and OR are not compatible. Ill read the rest of your post in 30 mins. GTGI know, I switched from OBGE to ORI should also say, that the black line that covers half of the screen stays, unless im in water. Thanks for replying at least, was checking in every hour VERY important detail: Opening console makes the black thing dissapear. Water stil not present. VERY important detail: Opening console makes the black thing dissapear. Water stil not present. open the console and type: TS', close console, and type again: 'TS' If that does not fix it disable HDR. Also try running the game without OBSE see if problem persists. Tried everything, didn't work ...Uninstalled TES, im gonna try to install it tommorow hopefully without any problems, gonna edit this if everything works out. Link to comment Share on other sites More sharing options...
predcaliber Posted October 24, 2015 Share Posted October 24, 2015 The dissapearing water can be fixed by setting bUseWaterDisplacements=0 in Oblivion.ini. If you have not enough grass when installing Oblivion Reloaded, Increase density in the grass.ini file from OBGE. (to 12 or 16 or something) The Steam overlay can also cause graphical errors btw with ENB and/or Oblivion reloaded . disable it. Link to comment Share on other sites More sharing options...
lubronbrons Posted October 24, 2015 Share Posted October 24, 2015 I think OBGE is not compatible with many mods, you can try alternatif :- for water use Improved water mod, it came with DoF too- for effect you can try ENB, there is many preset that you can try to match your preferenceafter I uninstalled OBGE, my oblivoin is get better fps & no more CTD Link to comment Share on other sites More sharing options...
Recommended Posts