Jump to content

Help with Dual Sheath Redux SkyPro - Missing masters


MajinSaevus

Recommended Posts

Okay, so I haven't played my Skyrim in a bit. I went to add some more mods and as usual rerun all the skyprocs and such so everything worked the way it is suppose to. When I tried to execute the patcher for Dual Sheath Redux it immediately gave me an error saying it was missing the masters Skyrim.esm and Update.esm. I decided to just uninstall everything and start fresh. When I finally had all the mods I want installed and in order I tried to use the patcher again and I get the same result. I have tried all the suggested fixes and workarounds but nothing has worked yet. Help would be greatly appreciated.

Edited by MajinSaevus
Link to comment
Share on other sites

Are you using Mod Organizer or NMM?

 

I've had this issue before and it's because my Dual Sheath Redux patcher was in the wrong location so couldn't find those masters. Load order may be an issue as well, so double check that.

Link to comment
Share on other sites

I moved files quite a few times during a transition from NMM to MO and the path provided to MO for the patcher was the wrong one basically.

 

Verify your patcher is referencing the Mod Organizer's mod folder that actually has your current mod set. Not one you installed in any other fashion.

 

EG C:\Games\MO Mods\mods\Dual Sheath Redux\SkyProc Patchers\Dual Sheath Redux Patch (my path to the executable)

Link to comment
Share on other sites

In Mod Organizer

Right Panel > Data tab > SkyProc Patchers > Dual Sheath Redux > Dual Sheath Redux Patcher.jar

 

I assume you've done that anyway so verify it's in Mod Organizer\mods\Dual Sheath Redux\SkyProc Patchers\Dual Sheath Redux Patch

For me it was that simple. Verifying the filepath for the .jar was correct and fixing it when it wasn't.

Link to comment
Share on other sites

  • 4 months later...

Guys, I'm having the same problem. When in MO, on right panel, plugins tab, the Dual Sheat Redux says the two masters is enabled. But when I try to patch the Dual Sheat Redux it says I'm missing the masters (Skyrim.ESM and Update.ESM).
I did everything like its said in STEP guide, using MO. Can somebody please help me?

Here is the Debug Overview:

"[1] [OPEN DEBUG FILE] Opening Debug File
[2] [Run Location] Program running from: C:\Users\Numpa\AppData\Local\ModOrganizer\Skyrim\mods\Dual Sheath Redux\SkyProc Patchers\Dual Sheath Redux Patch\.
[3] [status] Dual Sheath Redux Patch version: 1.7.2
[4] [status] Used Memory: 7MB
[5] [status] Max Memory: 247MB
[6] [sUM] Patch needed because no patch existed.
[7] [sUM] Patch needed: true
[8] [sUM] Starting patch because user pressed patch.
[9] [sUM] Window Closing.
[10] [Needs Importing] Needs importing because force patch was on or patch needed updating.
[11] [sUM] Patch needed: true
[12] [sTART IMPORT THREAD] Starting of process thread.
[13] [sPGlobal] Skyrim App data thought to be found at: C:\Users\Numpa\AppData\Local\Skyrim
[14] [importer] Starting import of targets:
[15] [importer] ARMA ARMO FLST KYWD MGEF WEAP
[16] [importer] In mods:
[17] [importer] Skyrim.esm
[18] [importer] Update.esm
[19] [importer] Dual Sheath Redux.esp
[20] [sPGlobal] Skyrim.ini believed to be in: C:\Users\Numpa\Documents\My Games\Skyrim\Skyrim.ini. File exists.
[21] [EXCEPTION] java.lang.NullPointerException
at skyproc.RecordFileChannel.openFile(RecordFileChannel.java:40)
at lev.LInChannel.<init>(LInChannel.java:43)
at skyproc.RecordFileChannel.<init>(RecordFileChannel.java:20)
at skyproc.SPImporter.importMod(SPImporter.java:531)
at skyproc.SPImporter.importMods(SPImporter.java:463)
at skyproc.SPImporter.importActiveMods(SPImporter.java:321)
at skyproc.gui.SUMGUI$ProcessingThread.run(SUMGUI.java:928)
at java.lang.Thread.run(Unknown Source)

[22] [ERROR] /=== ERROR!
[23] [ERROR] (==== File: SkyProcDebug/Asynchronous log.txt
[24] [ERROR] \=== Line: 2
[25] [ERROR] \== Message: Skipping a bad mod: Skyrim.esm
[26] [ERROR] \========================================>
[27] [ERROR] /=== ERROR!
[28] [ERROR] (==== File: SkyProcDebug/Asynchronous log.txt
[29] [ERROR] \=== Line: 3
[30] [ERROR] \== Message: skyproc.exceptions.BadMod: Ran into an exception, check SPGlobal.logs for more details.
[31] [ERROR] \========================================>
[32] [EXCEPTION] java.lang.NullPointerException
at skyproc.RecordFileChannel.openFile(RecordFileChannel.java:40)
at lev.LInChannel.<init>(LInChannel.java:43)
at skyproc.RecordFileChannel.<init>(RecordFileChannel.java:20)
at skyproc.SPImporter.importMod(SPImporter.java:531)
at skyproc.SPImporter.importMods(SPImporter.java:463)
at skyproc.SPImporter.importActiveMods(SPImporter.java:321)
at skyproc.gui.SUMGUI$ProcessingThread.run(SUMGUI.java:928)
at java.lang.Thread.run(Unknown Source)

[33] [ERROR] /=== ERROR!
[34] [ERROR] (==== File: SkyProcDebug/Asynchronous log.txt
[35] [ERROR] \=== Line: 4
[36] [ERROR] \== Message: Skipping a bad mod: Update.esm
[37] [ERROR] \========================================>
[38] [ERROR] /=== ERROR!
[39] [ERROR] (==== File: SkyProcDebug/Asynchronous log.txt
[40] [ERROR] \=== Line: 5
[41] [ERROR] \== Message: skyproc.exceptions.BadMod: Ran into an exception, check SPGlobal.logs for more details.
[42] [ERROR] \========================================>
[43] [EXCEPTION] skyproc.exceptions.MissingMaster:
Dual Sheath Redux.esp has some missing masters:
- Skyrim.esm
- Update.esm
at skyproc.SPImporter.checkMissingMasters(SPImporter.java:622)
at skyproc.SPImporter.importMod(SPImporter.java:537)
at skyproc.SPImporter.importMods(SPImporter.java:463)
at skyproc.SPImporter.importActiveMods(SPImporter.java:321)
at skyproc.gui.SUMGUI$ProcessingThread.run(SUMGUI.java:928)
at java.lang.Thread.run(Unknown Source)

[44] [DEBUG] Closing Debug File. Time was: 4277"

Link to comment
Share on other sites

  • 1 year later...

Hey, guys!!! I was having the same issue for a while and then I realized that I didn't have HDT Physics Extension downloaded. Once I downloaded and installed the physics extensions, my dual sheath redux and my xpmse were working beautifully again. Hope this helps!

Link to comment
Share on other sites

  • 2 years later...
  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...