TaxiVader Posted March 10, 2018 Share Posted March 10, 2018 Hi Folks. I'm trying to make an indoors settlement. So far all is well; I have 50 hap, settlers recruit and map data is OK and stays current. My problem is this: 1. Settlers can be transferred to the new indoor settlement, as it shows up on the list of transfer options. A settler from an outdoor loc to the indoor one de-registers at the outdoor one and registers at the indoor one, but they just stand still at the old location. They even assign to jobs in the indoor loc, but never show up physically. The same happens if I send a settler from my new indoor settlement to any other settlement. 2. Same thing with supply lines; they establish OK, show up on the map, but the Provisioner just stands there. These are obviously one and the same problem. Does anyone have any idea how to allow the settlers to path in and out of the settlement? I have tried picking apart Vault 88 and Vault 98 (by RyanC229) but have come up with nothing. I'll try anything, so if you think you've got some clue please chip in. Roger. Link to comment Share on other sites More sharing options...
TaxiVader Posted March 10, 2018 Author Share Posted March 10, 2018 Seriously, nobody has had this issue before?? Link to comment Share on other sites More sharing options...
speedynl Posted March 10, 2018 Share Posted March 10, 2018 depending where your settlements are, a settler/provider that don't move to his new location prolly mean there is a problem with the navmesh if the navmesh inside/outside is like it should be, they should move, i can remember long time ago some 1 had the same problem, after some checking/fiddeling his navmeshfrom his settlement locationd din't connect to the surrounding cells, after fixing this his npc's moved like intended Link to comment Share on other sites More sharing options...
cjs0216 Posted March 10, 2018 Share Posted March 10, 2018 (edited) I'm actually having the reverse problem. The provisioner, including his brahmin show up inside my place, which I would rather they not...lol Edited March 10, 2018 by cjs0216 Link to comment Share on other sites More sharing options...
Recommended Posts