lenns16 Posted August 20, 2019 Share Posted August 20, 2019 (edited) Hello i downloaded https://www.nexusmods.com/skyrim/mods/2581/ this then i recognized that it is lowering graphics so i back up my d3d9.dll and then i replaced mine and nothing is changed even there is a water glitch so i want to go back to my old settings how can i do that ? my skyrim is also modded. Water : https://imgur.com/a/Rkixlzihttps://imgur.com/a/tXSLmDj in a nutshell how can i remove this mod completely ? Edited August 20, 2019 by lenns16 Link to comment Share on other sites More sharing options...
Shadeybladey Posted August 20, 2019 Share Posted August 20, 2019 Normally, you would: repeat the instructions you followed but in reverse order, remove anything added by that mod replace the files you backed up before adding this mod revert any *.ini file settings for graphics that might have been changed make a note to never use a mod from December 2012 that has never been updated never use techy tweak mods if you don't know what they are doing if you have performance issues, use fewer mods, run at lower graphics settings, learn ro tweak the inis maybe get a better PC HWater : https://imgur.com/a/Rkixlzihttps://imgur.com/a/tXSLmDj Why does everything look like corroded rust? What version of Skyrim do you have? What mods are you running and what are your system specs? Cheers! Link to comment Share on other sites More sharing options...
lenns16 Posted August 21, 2019 Author Share Posted August 21, 2019 My system specs : AMD Athlon X4 845 Quad Core process 3.50 Ghz - graphic card RX 460 - 8 GB Ram - 64Bit Asrock motherboard my skyrim version is LE My mods : https://imgur.com/a/kk1XIJf Link to comment Share on other sites More sharing options...
lenns16 Posted August 21, 2019 Author Share Posted August 21, 2019 I changed my ini files and the water is okay now but look at these textures :https://imgur.com/a/4o29xyL Skyrim ini : [General]sLanguage=ENGLISHbBorderRegionsEnabled=0uGridsToLoad=9 uExterior Cell Buffer=100 [Display]fShadowLODMaxStartFade=1000.0fSpecularLODMaxStartFade=2000.0fLightLODMaxStartFade=3500.0iShadowMapResolutionPrimary=2048bAllowScreenshot=1 [Audio]fMusicDuckingSeconds=6.0fMusicUnDuckingSeconds=8.0fMenuModeFadeOutTime=3.0fMenuModeFadeInTime=1.0 [Grass]bAllowCreateGrass=1bAllowLoadGrass=0iMinGrassSize=40 [GeneralWarnings]SGeneralMasterMismatchWarning=One or more plugins could not find the correct versions of the master files they depend on. Errors may occur during load or game play. Check the "Warnings.txt" file for more information. [Archive]sResourceArchiveList=Skyrim - Misc.bsa, Skyrim - Shaders.bsa, Skyrim - Textures.bsa, Skyrim - Interface.bsa, Skyrim - Animations.bsa, Skyrim - Meshes.bsa, Skyrim - Sounds.bsasResourceArchiveList2=Skyrim - Voices.bsa, Skyrim - VoicesExtra.bsa [Combat]fMagnetismStrafeHeadingMult=0.0fMagnetismLookingMult=0.0 [Papyrus]fPostLoadUpdateTimeMS=500.0bEnableLogging=1bEnableTrace=1bLoadDebugInformation=0[Water]bReflectLODObjects=1bReflectLODLand=1bReflectSky=1bReflectLODTrees=1 SkyrimPrefs.ini : [General]sLanguage=ENGLISHbBorderRegionsEnabled=0uGridsToLoad=9 uExterior Cell Buffer=100 [Display]fShadowLODMaxStartFade=1000.0fSpecularLODMaxStartFade=2000.0fLightLODMaxStartFade=3500.0iShadowMapResolutionPrimary=2048bAllowScreenshot=1 [Audio]fMusicDuckingSeconds=6.0fMusicUnDuckingSeconds=8.0fMenuModeFadeOutTime=3.0fMenuModeFadeInTime=1.0 [Grass]bAllowCreateGrass=1bAllowLoadGrass=0iMinGrassSize=40 [GeneralWarnings]SGeneralMasterMismatchWarning=One or more plugins could not find the correct versions of the master files they depend on. Errors may occur during load or game play. Check the "Warnings.txt" file for more information. [Archive]sResourceArchiveList=Skyrim - Misc.bsa, Skyrim - Shaders.bsa, Skyrim - Textures.bsa, Skyrim - Interface.bsa, Skyrim - Animations.bsa, Skyrim - Meshes.bsa, Skyrim - Sounds.bsasResourceArchiveList2=Skyrim - Voices.bsa, Skyrim - VoicesExtra.bsa [Combat]fMagnetismStrafeHeadingMult=0.0fMagnetismLookingMult=0.0 [Papyrus]fPostLoadUpdateTimeMS=500.0bEnableLogging=1bEnableTrace=1bLoadDebugInformation=0[Water]bReflectLODObjects=1bReflectLODLand=1bReflectSky=1bReflectLODTrees=1 Link to comment Share on other sites More sharing options...
lenns16 Posted August 22, 2019 Author Share Posted August 22, 2019 (edited) s Edited August 22, 2019 by lenns16 Link to comment Share on other sites More sharing options...
Shadeybladey Posted August 22, 2019 Share Posted August 22, 2019 I wish I could be of more help, but you basically remove it as I said above. I tend to not use many graphics mods, I prefer realism and survival mods, camping, alchemy, cooking etc. I found Skyrim looked fine as it was. I perticularly dislike "Tropical" mods. I'm not sure if any of your texture/clothing replacers have dome something to your armour, EG if the chest piece texture is missing? You could try loading a save from before you messed with that tweak or try a new game? These do not need to be in SkyrimPrefs.ini, just Skyrim.ini:uGridsToLoad=9uExterior Cell Buffer=100 They do not really improve graphics, they allow you to see and interact further out than the default 5 and 36. a) this allows you to shoot wolves etc that are much further away than normalb) they can cause quests to kick in when you are quite some distance away. This can make the Skyrim world seem more real, and Monsters, NPCs and Thalmor patrols are not just standing around waiting for you to approach, but it can mean that you can miss some things and some quests can start when you are not there. EG the fight between the giant and Companions when you arrive outside Whiterun is already over. Having said that, I have used them and could go up to 11, but it made the game terribly unstable.9 was OK for me.7 was really good. I'd try adjusting to 7 and 64, rather than 9 and 100. Many, many people say they are dangerous and can trash your game, due to quests triggering too early when you are still far away. Perhaps someone else could be of more help, but I think you may be overstretching your system with your mods and settings. Good Luck :smile: Link to comment Share on other sites More sharing options...
lenns16 Posted August 23, 2019 Author Share Posted August 23, 2019 I completely changed my ini files and there is no prob now thx for everything. Link to comment Share on other sites More sharing options...
Shadeybladey Posted August 23, 2019 Share Posted August 23, 2019 Excellent! Thanks for letting us know. :D Link to comment Share on other sites More sharing options...
Recommended Posts