Grecia300

I can agree with this. That is, the quint-essential typical Skyrim, afterall. And I am on windows 10 (horrid thing that it is... >.<) I'll try that link and see if it helps. EDIT : Aight, I tried and it seems I cant even try to complete the process. Windows says I dont have the sufficient privilege to perform the action (when I attempt to link the sound bsa in the new vhd to the skyrim data folder). Guess I am right back to square one.

Clearly you didnt listen to me the first time I said it cant be an individual mod. I love Dreams and Nightmares. First time I used it, no problems. I rotate my music mods, never using the same mod twice in a row. The whole line that its a sound mod at fault seems a dud to me. From where I sit, the sound d-sync could easily be a symptom of the problem, or an after affect of the thing causing the freezes, rather than the cause of them.

I can safely say it isnt Immersive sounds. As said in the OP, I drastically change my LO from playthrough to playthrough. This includes the music mod I use. I probably have 6 or 7 in my left pane in MO. Far as volume mixing? I have my speakers, my headphones plugged into them, the volume controls on my keyboard (buttons are just above the numpad), and then there is the volume controls of skyrim itself.... there is no way in hell that they are all the same. But thats not the problem either, cus I always had it this way, minus the headphones which were a recent addition. (since November)

Unfortunately, none of those suggestions are viable, at least in my case. It cant possibly be Immersive sounds, as I've used it literally since I started modding, many many years before this issue cropped up. Verifying the cache through steam shouldnt produce any results whatsoever, as I have not only tried it before, but - as I said in the OP - reinstalled Skyrim several times. Which pretty much does the same thing. Cleaning my saves isnt going to work either. They are already clean, ontop of this issue affecting multiple profiles within Mod Organizer. With my setup, each profile has its own individual save folder. They're completely separate.

Aight so the issue is pretty much like the title says. I've had this issue for about 9 months now, and its slowly gotten worse to the point that I cant go 5 minutes out in the wilds without this happening. Its a constant issue. There is a period of time (between 2 or 3 seconds, to over a minute) where sound just doesnt play at all, followed by a freeze for several minutes. Sometimes pressing A on my xbone controller 3-6 times can force the game to unfreeze but that has a 50/50 shot of just causing a flurry of these issues to happen repeatedly one after another. This could occur indoors, outdoors, with 30 npcs around, or with only 2 or 3. It can happen anywhere and everywhere. Less so in ruins and dungeons like Bleak Falls Barrow, or Mzulft, from my experience. I believe it is somewhat influenced by the amount of mods in my bashed patch, mods that edit spawn tables (both npcs and loot), and the number of script heavy and quest mods in the LO. But I have almost nothing to back that up, not for an absolute fact. I have reinstalled Skyrim several times in an attempt to improve things, to no affect. I drastically change my LO every playthrough, so I highly doubt its a specific mod due to lack of many of those across 12 different load order's. I am out of idea's and patience, so I need help here. CPU - Intel® Core i5-7400 CPU @ 3.00 GHz Graphics card - AMD Radeon R9 M360 (VRAM is 4096 MB) System RAM - 16 GB Its a desktop, not sure if its got integrated graphics card or not. My Skyrim is installed on my external hard drive (G: SteamLibrary/steamapps/common/Skyrim) Game version is obviously the latest version (not entirely sure where to check for the specific number, doesnt seem to be in steam) I have all DLC's I use MO classic version 1.4 (found on the MO2 SSE mod page) My SKSE version is 1.7.03 I have the Creation Kit, TES5Edit, Wrye Bash, Skyrim Save Game Cleaner, Merge Plugins, Dual Sheathe Redux, and Nemesis Engine installed for tools and such. I also have Loot, Mator Smash, and a couple things to help with ENB management but I never use any of those. I'll post my Load Order in the attachment section below. I can also post my mod list, if needed.

Ok so, I was having issues with meshes (like floors and walls in places) simply not appearing, so I stupidly tried to reinstall, not realizing that I was using the esp version instead of the esm version. Now I completely borked up my game into crashing as soon as I load my save and there isnt a way for me to get the old files back. Is there anyone out there that have a copy of Vigilant and the english addon version 1.4.4? I pretty much cant play until this gets fixed. :/

While I hadnt downloaded the mod yet, I have been keeping my eye on it since it was covered in a mod review - by Gopher, I believe - and I offer my most sincere congratulations on the mods success. Very well earned, from what I'd been able to learn. I have been testing mods for an upcoming playthrough, so I think this'll be a perfect time to get iEquip in my load order. :)

Ok, I tried it out, and it seems to work perfectly. I can login to Nexus, download mods via MO, and more importantly, I dont have that error in the log that was annoying the snot out of me. :P However, I also wondered how it would work if I overwritten MO1.3.14 (the install in the game directory) with version 1.4 and it also works perfectly, strangely enough. I do need to setup my toolbar and executable's tho. A minor annoyance. Thanks for the help, and I hope it'll work just as well for you as well. Since you said you were in the same boat. Cheers!

I can give it a shot, but I think its VERY unlikely that'll solve anything..... been running MO in the game directory without any issues for years :/

Hit a snag. Got the Entry Point Not Found error. "The procedure entry point ?key@NXMUrl@@QBE?AVQString@@XZ could not be located in the dynamic link library C:\Program Files\Steam\steamapps\common\Skyrim\Mod Organizer\Mod Organizer.exe" You able to make heads-or-tails of this? Cause I sure as hell cant.

Thanks for the info. I'm going to try updating to version 1.4.0 on the MO2 mod page. It was uploaded on May 21st and might contain a fix. Its a fair assumption because the version name is 1.4.0WithNMMFixes, so it might help. If it does, I'll let you know since your having the same issue. Note : I did try this earlier and it went horribly wrong, but I was very tired and could have butchered something, or maybe a faulty download. I made a backup of my install, and will see if trying again yields better results

They updated it again?! Well at least I dont have to keep f*#@ing around with it and potentially breaking my install.... When did they update it, if ya dont mind my asking?

I have tried everything I can think of and then some to try to fix this, but as my posting suggests, I have failed at all attempts. I've tried editing the windows Hosts file, reinstalling MO, updating to a newer version of MO1 (1.4.3 or something hosted on the MO2 mod page, I believe). I tried editing the workarounds tab. I need help. This issue has been going on for maybe a few weeks and I am clearly not getting anywhere by myself, and I'm at wits end here. Also, 1 final thing : I will NOT start using MO2 for skyrim. I already use it for Morrowind and FO4, so its nothing against MO2, GamerPoets just recommends switching only if your about to start out with a blank mod list, and I'll never do that. And I'll do everything in my power to prevent that from happening. If there's anything else do to help clarify the issue - or I'm being dense and forgetting vital info - just tell me and I'll try to get it for you. Cheers!

First off the help I'm asking for is for personal use only and I've no intention of uploading. Just wanted to clarify that at the beginning. :smile: Now, back to the point, I recently started looking for a mod to change Jordis the Swordmaiden's appearance and after I got done looking, I started to experiment with a few mods and see what looked best. I eventually decided to stick with the vanilla mesh, but use Better Females to enhance her textures. But I already have a broad spectrum retex for general NPC's which came into conflict with Better Females by simply being overwritten. I'd like to know if there is a way to apply Better Females to ONLY Jordis, but use the other retex for everyone else?

Might as well give it a shot, I guess