GentleLite

LOM is a game that probably a lot of people don't know about. It currently has a bad rep due to a former staff member explaining what goes on behind the scenes as far as game development goes and it sounds bad. Its a game that focuses on these concepts: Hot Women Super Heroes Combat This game is also not on Nexus so I'm not even sure if I can make a request on this. I just want to play this game with a better combat overhaul. The current combat is terrible and after 3 years, It feels like the devs have no intention of changing it. I wish I could mod, I would show them how to actually make the game good.

I was wondering if someone can share the nif files for the ears and maybe if I replace them, my ears will go back to normal. Right now, they are elf ears. I don't mind it at all, but I don't like that I can't adjust it. When I use the Race menu sliders (doesn't matter which one), it only morphs it in very strange ways. This happened when I started with a face preset and made adjust adjustments after that. Update - Now.... I am using High Poly Head. would replacing the ears effect it? bottom line is, I want to get my ears back to normal and have the sliders change it to the normal shapes.

No worries there, I have the unofficial patch version 5.04 that works for my current version of skyrim se 1.5. I never deleted it off my backup. It's just not fixing this bug.

Trying to get this to work is just making me sick + headache..... Is there like a older version of the unofficial skyrim se that can get me past this? checked Nexus, there doesn't seem to be a dedicated resolution/mod fix/patch for this. Steam forums mentions the same console cmds wiki mentions attempting all these tricks such as killing an ally, do this, do that, etc. It also mentions the console. I've seen a few incompatible mods which I don't have installed. About to give up. I need a favor from anyone reading this. Start a new game with alternate start. go guild path, college of winterhold. run inside (no need to listen to arcano's and her conversation outside) listen to the lecture inside, and let me know if it completes that quest and starts the next one. weather it works or it doesn't, let me know and also let me know if you are running Se or AE

I completed first lesson for the mages guild. This is when I learned the ward and I have to put up the ward spell while he hits me and then we are asked to move to Saarthal. I get the quest complete for that one, but the next one doesn't start. Of course, I looked this up and tried the following console commands: setstage MG01 200 Exit console, does the next quest start? If not use these startquest MG02 setstage MG02 0 Exit console, does the quest procedd? If not try this one last command setstage MG02 10 I even tried teleporting the NPC to Saarthal. No luck. I was told to attempt to kill the students (a round about method) but I shouldn't have to do all that. I do have the unofficial skyrim patch and it said that the patch is suppose to fix this but it doesn't. I"m on SE, not AE.

Is there a solution? I want to keep both these mods.

**Ignore this topic, getting help from the shaders discord*** screenshot of the issue (ignore white eyebrows, that's unrelated) HERE Press the home key to bring up the shader settings. For an ENB that I use, its highly recommended to have this shader enabled but if I have it on, this happens. I love what this setting does to the overall environment but it's hitting my eyebrows. Any solutions? You can download this shader here additional info: MXAO is a high-quality, high-performance Screen-Space Ambient Occlusion (SSAO) Effect which accurately simulates diffuse shadows in dark corners and crevices.

****Issue resolved on my own but may help someone else***** The real problem is I don't know when it started. You don't notice unless you are in racemenu or if you increase the zoom settings on the camera mod. I have no idea when it started. I started by disabling things I did add such as high poly head, anything that I can think of. Started a new game and the brows/eyes are still like this. I also recently installed DynDOLOD and I got a new ENB set up. Also changed my graphic mods. These were the last things I were working on in the past week or 2 Update - as I was typing this, I disabled my ENB and now my eyebrows are no longer white, but the eyelash issues still persist. Anyone know what enb settings would be making my eyebrows white? I also still need to resolve the eyelash issue Update - lol eye lashes issue resolved (disabled a setting in the home key options). I'm basically fixing it on my own after typing this post so this was not a waste of time. So last issue - what settings is changing my eyebrow to white. I'm still looking into this..... Issue resolved with this - Shiny ENB Eyebrows Begone at Skyrim Special Edition Nexus - Mods and Community (nexusmods.com)

ARJARIM Graphic Overhaul instructions Need some help. When I Launch the game, I get a syntax error at the top of the loading screen. It says something like: enbseries\embeffectpostpass.fx{1,1} error X3000: Syntax Error........... and the rest of the error goes behind the big skyrim special edition title font at the top right. The instructions on ARJARIMS patreon is a little hard to follow but here is what I did: downloaded and installed all requirements. Inside his overhaul zip file, he has an EMB folder. Inside the emb folder is an embseries folder. I took that folder and put it inside the special edition directory and selected to replace. I installed Marty's MODS epic reshade effect inside my mod manager. Also inside his overhaul zip folder is a reshade ini. I put that inside my skyrim se directory as well. I appreciate any help. If you need to actually download it to help, his patreon page has it password protected. I have the password so I can just pm it to anyone. update - the preset doesn't show up under KreatE Update - You know what.... I may just use the enb recommended by Cathedral Weathers and Seasons which is this one No errors

Thanks

Really appreciate your help since you're the only one to respond. I do see a few errors but not sure what to do about it. I was thinking about changing my load order and/or using different landscape mods since this is beyond me. I should have some time today to look into it. Question, when changing the load order, is DynDOLOD required to be ran again? Or is it only when you remove/add mods? update - Well.... it looks better. One thing I made a mistake on is I had two simplicity of snow mods installed when I only needed 1 (thought I needed the main file at top but I didn't). I used the paralax simplcity version. Just in case, I moved the snow mod up to make sure nothing overwrites it. It looks much better, I guess I don't really like the color difference. Is there a way to tone down the vibrant colors it shows?

Thanks. I'll check these out

Thanks for the reply. Honestly gave up on this for later. Here is a screenshot of what I see. Now I'm not 100% sure what I should be doing with the RefID. But maybe I can try using this in sseedit or something? edit - oh wait, it says last changed by dyndolod. Is that the culprit? Setting up Dyndolod was so complicated I'm surprised that I got it working at all. Any help on what to do is appreciated.

hello everyone. So I just started getting back into skyrim a few months ago. I stopped playing for a few years. At the time, I've been updating my mods, and most of the time when I visit the mod page, it says "this mod is obsolete, use this instead", etc etc. Well, anyway I'm at the point where I think I'm considered up to date on the new gen stuff. My question is I'm still using mods like wildcat, deadly combat, mortal combat and such. Is there a better mod that are similar to these that I should look into? Note - I"m not looking to improve combat animation, gameplay, etc only AI. Of course, if there is a mod that handles both overhaouls and AI, do let me know. Right now the enemies dont seem to attack when I'm running, only when I'm at a complete stop is when they attack. I don't really like this because even if I'm out of stamina, as long as I run, I'll get away.

Yea, can't figure out what this is. Those blue spots on the ground. I wonder if it has to do with my old enb or load order. i tried disabling my snow mods and textures but it was still there. I assume posting my load order will help? Let me know if you need it. It may take some time.

Hello. I got a new computer with a 3060Ti and I went ham with improving my graphics. I was at a good point. I then learned about parallax and DynDOLOD. I went over my head and set everything to high which was a mistake. I guess even a modern graphics can't handle all this. Anyway, down to my issue. Take a look at this image I attached. I'm not sure why I'm seeing this blueish/white patch here. I'm trying to figure out what's causing that. I'm using Veydogolt - Grass and Land and Water Overhaul and its recommendations. Now I'm wondering if that patch of area is suppose to be snow? Update - no, don't think its snow. the texture is just blue

Also on 1.5.97 as well. Thanks for the help

I hope so, otherwise I would feel silly. Just in case however, double checked and indeed I have it unchecked. I hit restart, saved and closed/reopen skyrim but the issue still happens.... But since you reported there is nothing wrong with the mod, I can troubleshoot elsewhere so thanks a ton for that. I checked my load order, I may have screwed up here. I swapped places with the requirement mods. However now the MCM won't even load. I'll try a new game since I haven't gotten far. Also thanks to you I see there is a patch for mfg face tracking which I just got.

The mod is called conditional expressions. One of my favorite expression's mods imo. I appreciate your help on this. Conditional Expressions Extended at Skyrim Special Edition Nexus - Mods and Community (nexusmods.com) Along with its requirement and its requirements requirement to the 2nd power lol

Oh boy, sounds complicated but I decided to take a step forward. Champollion wouldn't run, ran into a few headaches, but found Champollion Graphical User Interface which I merged and installed net 7.0 so it seems to be working now. I decided to download Note++ since it seems to make things easier. For now, I used the search function on each pex/psc file and found no results. I also searched the patch file that came with the mod, no luck. So.... what you're saying is, I should move the mod and all mod requirements into a single folder then open it in creation kit? I may need to do some baby steps since I"m new to all this. I see in creation kit I can make mods active and open them (I tend to always get errors but it does open). So would it be ok to make them all active or do I really need to move the folders in one location?

I'm using a mod called conditional expressions and I really like it. Problem is, these notifications that say "expression reset" keeps appearing at the top left every couple seconds. This mod does come with an mcm with two notification settings which I disabled but the issue persists. This mod also has no sort of ini or anything I can edit. I think the mod creator is aware but its taking too long so I would like to take things into my own hands. I opened up the mod in creation kit. The problem is, I have no idea what to do now lol Is there a way to find this and disable it in creation kit?

For some reason, my horse doesn't slow down even at 0 stamina. I have so many mods that I can't even think what it could be. I do have convenient horses. But I've always had that in the past with no issues (except for at times my horse goes flying through the air with me on it). Anyone know what mod does this? I am unable to post my mod list at this time.

For this one, I am willing to make a donation for help (I did read the forum rules but if its not allowed, let me know) I know I have a ton of errors showing up. I want to fix the one that causes the ctd. According to a website I read, its always the one at the very bottom of the log that is causing the issue? In skyrim se, I was just teleporting to whiterun and it ctd on me. Every once in a while I get random ctd's as well but not enough to where I can't enjoy the game. I know its probably best if I started fresh with skyrim se including my mods but I just don't want to. Already lvled up my character and everything. edit - Wait, I'm a premium member? I completely forgot about that O.o

Anyone know how to fix? In outfit studio, this doesn't show up. In fact, there is actually quite a bit of distance between the pants and the corset since I inflated it so the skirt can fit too (which I don't have equipped here). A few things to note, I'm on special edition. This outfit was made in Legendary Edition. I had to convert it using Cathedral Assets Optimizer. This got rid of the triangular missing meshes thingy. I fitted this outfit to my body type. Now, I also have a blue/white outfit version that I finished and this odd clipping issue doesn't show up on it. It only shows up on this Black and white one. This is Harry's H2135 Modern series 3 which you can get on his patreon. This is for cbbe and unp or whatever its called but I grabbed the cbbe one.

Here is the dance video - https://www.youtube.com/watch?v=4H90n7T7rEc My goal is to get the full outfit working with hdt physics with cbbe. Here it is on nexus (UNP) - https://www.nexusmods.com/skyrimspecialedition/mods/13094 However, this version is static (no body slide folder either). Here is the cbbe body slide version on the Chinese site - http://www.9damao.net/forum.php?mod=viewthread&tid=32063&highlight=Haku%2Bwedding In order to download this, you need to make an account which is easy here. After you make an account reply to reveal the hidden password to download. Once you reach the download site, they ask you to install the download app which is where the problem lies for me. The app requires you to put in your phone number, email, password. A USA number doesn't work and I'm guessing I need to verify my account via phone. So this is where I need help...... 2nd: Ok so once I get past this, the next issue is will just adding the body slide work? This is UNP with cbbe body slide. Will this be considered a correct conversion by just installing it in M02? Also, I see no mention of SSE so will this also need to be converted (which I have no idea how to do). If I can get this fully working, I can die happy.