Amki45

Here some news (not even good ones): - First, I tested your settings without using chill feature and didn't notice any differences. - I tested with chill (set to 59-61) and I also didn't notice any differences BUT with ENB VSync and Frames lock disabled, at first, I didn't see any difference. Then I saw 700 fps on loading and sometimes more than 60fps in interiors (when my graphic card work correctly --> Getting at least, 60 fps). So I think that the feature don't work at all or something is preventing it to work (version 20.4.2). Also, didn't notice any green/black screen with the feature enabled so it's that's also why I think the feature doesn't work at all, because it could be a proof of his presence. I searched for similar problems on Internet but found none, as well as no information about the functionality being disabled in the latest updates. Also, as I played, I noticed a new detail. It seems that the sudden drop in fps is not necessarily happening after a loading because sometimes even walking around in an open area it happens. And when I quickload to do the exact same thing (hopping that this time fps don't drop), sometimes the problem arises earlier, other times later and other times not at all. So at the moment I didn't make any progress from the start in resolving my issue, just been collecting informations on it desperately : /

After further investigation, It seems that after update 20.2.2 less than 10% of RX 5700 card users still have some problems with their cards. Sorry if I have given an opinion which does not correspond to the globality and especially to the majority of the users, it was not intended. I was just wondering if I'm the only one who's encountered these kinds of problems and maybe found a solution. At the moment, I think that the only solution is to wait for AMD drivers updates and BIOS updates from custom graphics card manufacturers. After 20.4.1 update, always observing the same problems for my part, there are also a few other games where I encounter similar problems, like TESO. It would appear that this does not concern all places and all games and that it is not a performance issue. I can assure that because I recently tested another ModPack even bigger in therms of performance cost. In some places and also according to what is done before (see if I load my backup directly in the zone) the GPU seems to react differently. Sometimes it behaves normally and allows me to get up to 60 fps (with no slutter, correct temperatures that prove that the gpu is working) and in other times the GPU seems to be lazy with low temperatures, fan speed, electric consumption (only the VRAM behave normally) that results into low fps (between 5 and 30 in most cases). Same situation in TESO. I will update this topic when I find something interesting or if I come up with a solution.

Hi, I see you haven't downloaded and used LOOT, that's very important whenever you want to mod Skyrim even if you have a very few mods, it helps you to sort esp to avoid CTD. Also, it looks like your using FNIS (1st screenshot) but I don't see it in your modlist. Don't know if it's gonna solve your issue but that's pretty weird : / Also if your very patient and this didn't solve your problems try disabling your mods one by one if no other solution is found. Advice: If you're only crashing near cities, it has to be because of mods that change cities.

Okay, so Sorry to bring up this post, but I've some news and I hope it can inform and help people that are in the same situation as me. I found the reason to the problem but currently there are no solutions. The problem simply comes from the AMD drivers which are quite unstable lately and especially for users of the latest RX 5000 series. Some of you may already be aware of crash issues with black screen (or green screen for those with older screens like mine). Personnaly I was getting them on Skyrim SE before the 20.2.2 update. I found that if I enabled the "Radeon Chill" feature I would not lower my FPS to save power but instead to increase the minimum FPS to have a stable and playable game (sometimes it runs at 5fps in small interiors like farms). And it works ! Stable game, reasonable temperatures and FPS that doesn't go below the minimum limit that I've set.The problem is that this feature causes the problem stated above, a green screen for me (even after 20.2.2 update). So I think we just have to wait for AMD to fix those bugs. Hopefully it won't take very long.

Most of my textures mods are set on 2k I'm using 4k only for males and females bodies and only 1k for small things like eyes, mouth... I would stop carrying for fps if I was at least above 40fps but that's not the case. I upgraded because I wanted to play Skyrim with more fps and better graphics but I just can't. 30fps average in random locations is really low for my specs and it's not a VRAM issue cause I always run new save for testing and VRAM does not exceed 50% (4GB / 8GB). Only 260mods, I downloaded everything I wanted but I'm very disappointed.

Hello, So, I'm not quite new to modding and wanted to get another round on my favorite game. In my last build I was around 37fps avg with a GTX 970 and a whole ultra settings and 2K build (300+ mods). And now with my new graphics card I think I could reach the 60fps gameplay. So I followed a modlist and made some adjustements (list here, demonstration here). I have done a 4k-2k build and I'm running at only 30fps... wtf, someone in the comments said "Tested in a GTX 950 with a Athlon x4 860k stock on 768p and working on 30fps" !?! (Random location on Solthsteim left to Miraak's temple, there is a wounded body of a woman) My Modlist (top overwrite bottom): My LoadOrder (top = hightest priority): I'm also using Rudy's ENB (3fps gain when I disable it... IMPRESSIVE). Fresh Windows 10, fresh graphics drivers, bios updates... I have done a perfect installation (no crashes so far): using MO2, setting loadorder with LOOT, remove ITM with SSEEdit, build LODs with DynDOLOD, run BodySlide... I don't know if I missed something like a mod or a step... My Specs: Did I messed up or did I get too greedy ? (If some of my installed mods are very fps-unfriendly I could test without them if it makes the difference)

Hey, Have you tried as I said before to rebuild all the meshes with the BodySlide and Outfit Studio software-mod ? If it's not the case you can find it here: https://www.nexusmods.com/skyrimspecialedition/mods/201 Take care and follow the tutorials in the link description and keep us informed if this solves the problem

I think I found the problem but I'm not sure if that's what's solved the problem, others will just have to confirm. I installed other mods in the meantime (it's not just a bunch of boots that will stop me from playing) and to install one of them I had to re-build all the meshes in BodySlide and it seems to have made the boots reappear I think I have already looked for the boots in BodySlide but I didn't find them, maybe they are not registered as "Fur boots", who knows ^^

Sorry, I posted the same thing twice, shitty connection

Mhh strange... Sorry to ask so many questions, but you have to if you want to solve the problem : / Does your SKSE version match with your skyrim version ? Did your game work before mods were installed ? And for the load order you can copy it from LOOT in the 3 dots menu

These messages are normal, "C:\BASE DIRECTORY\profiles\MY MAIN\lockedorder.txt saved" appears when you click on "unlock". So here it appears because the game can't even start. Did you use LOOT to check that the mods load in the right order and especially that there is no lack of compatibility patch or other mods? If not, download link is here: https://www.nexusmods.com/skyrimspecialedition/mods/1918 Now if it still doesn't work, send the content of the "loadorder.txt" (that can be found in "C:\BASE DIRECTORY\profiles\MY MAIN\loadorder.txt")

Hey, you could try to use FallrimTools (https://www.nexusmods.com/skyrimspecialedition/mods/5031/) to clean up your saves and remove unnecessary scripts or those of mods you have previously removed

Hey everyone, Like I said in the title, I have a little problem with Female's fur boots. I don't know where it comes from. I tried a few things but I don't really know how to do it and the little I did didn't change anything, so well, no choice but to ask for help :D Here are some screenshots: Here is my load order:

Hey, It seems that you forgot to download the Cutting Room Floor patch to work with RS Children Overhaul :2nd File here : https://www.nexusmods.com/skyrimspecialedition/mods/276?tab=files I also advise you to place the "unofficial skyrim special edition patch.esp" just after the "Dragonborn.esm" If you still have problems search for LOOT here : https://www.nexusmods.com/skyrimspecialedition/mods/1918/ And then in the "Supported Tools" options of NMM search for LOOT and "Sort Plugins". See if in LOOT you don't miss another patch. If not it should be better now.

Hello, I have a big problem with my game I can't open it ! When I launch it, the SKSE console opens and then nothing :confused: I have a lot of mods and I thought it came from some of them but no matter how hard I tried I couldn't find any way to detect where it came from. I have no log since these do not have time to be done (or then I do not know where to look for them, nothing on Papyrus'). I tried LOOT and it detect nothing, Wrye Bash, Creation Kit for Oldrim mods, SSEEdit, Firewall blocking. I don't know what to do now, I tried many techniques for no result. This is my load order : My entire mod collection for more details : My main hypothesis was an outcome because of a RAM problem but I found no solution since there is not supposed to be any such problem. Also such problems with SKSE.ini but I didn't know how it work at all. Thank you in advance for your reading and help ! EDIT: Forgot this post, the CTD was due to forgetting to unpacked RaceMenu and add SKEE plugin... Sorry for the useless post :wallbash: