Jakeasaurouz

I'm having this same problem. I'm going to try and reinstall wrye bash, and see if that helps

What I might do is just transplant everything to a larger case. Maybe a new motherboard.

Wow, thanks for a quick reply :) The program that I'm talking about is GPU-Tweak. The default clock speed is 600~ and the default memory clock is 1200~ I can get to 700 on the clock speed but anything past like 750 makes it "crash" to a black screen. And if I change the memory clock at all I get a checkerboard pattern all over the screen and a hard crash. The PSU is bare minimum for the system as you suggested. So there's no real problem aside from the desire to increase the clock speed. Theoretically, if I did install the new PSU outside the case, would the cables still be compatible? Or would it be sort of like trying to plug an american plug into a European outlet?

I have a question about computer power supplies and their compatibility. Ungh... I'm not actually sure how to ask this, much less how to google it -_- So I'll just describe the situation I guess. I have a low-profile PC a mini-atx motherboard. Not entirely sure if thay's what it's actually called... it's just a smaller case and motherboard. It came prebuilt and I added a graphics card. But the PSU isn't up to par with it. It works because it has a built in over-clocker and I reduced it (the complete opposite of what an OC is for :P) Anyway, I'm considering buying a new PSU but since the computer is low profile, I have limited options. I've considered installing it on the outside of the case and it sounds sort of like a viable option. So... I guess with all that being said: To what extent should I be concerned about compatibility? PSU I'm Coinsidering: http://www.amazon.com/gp/product/B008RJZQSW/ref=ox_sc_sfl_title_1?ie=UTF8&psc=1&smid=A2NG4HB43UEDVL My PC: http://www.amazon.com/Gateway-SX2870-UR10P-Desktop-Black/dp/B007X0NBWO/ref=cm_cr_pr_product_top Graphics card I have:http://www.asus.com/Graphics_Cards/EAH6570DI1GD3LP/

I was looking at a pot where you make food, and I noticed that up close it's a static mesh with a couple bumps in it. This is incredibly noticeable when one has sounds of Skyrim installed where everything has sounds attached to it. I'd like to request a mesh/texture that is animated to look like it's boiling. I honestly don't know if this is even possible, if even practical, but it's one of those things you don't notice but once they're there you realize how shallow the former was. Whoever takes up the mantle on this one will... Get a promo? On my relatively unpopular YouTube channel, Jakeasaurouz

I might try this actually. I'm a huge fan of supernatural. I am definitely not promising anything, I haven't been modding very long...

I hit a wall

I second this. But I think the only way around this atrocious mistake on Bethesda's part, every single wyvern model has to be reconstructed to have four legs and this would be ridiculously hard. They would also have to be reanimated. I thought about grabbing the torch on this one but once I looked further I realized that... just no, there is not enough cause for me to reconstruct the dragons in Skyrim.

I also made her a friend instead of lover, maybe that also did it. I realized that before, I didn't even have the amulet of mara equipped, so I have no idea how I actually got it to work, but it should be any one of these things

I FIXED IT Set her to not affect the stealth meter; this worked for me EDIT: I meant uncheck the box

This is the most annoying. That did not work. If anyone knows how to fix this it'd be appreciated... I have the same settings as the OP, but I don't know what the "Also her quest for the player completes at stage 40..." means

I had the same problem... I think maybe I should try ridding her from the skyrim world (I edited her after I asked her to follow me) and trying again...

Omg it worked for me... Okay here's what I did: 1. verify files in the creation kit on steam. 2. Add these two things back to your editor ini (I can't promise you it'll work if you do anything else to your ini bAllowMultipleMasterLoads=1 bAllowMultipleMasterFiles=1 3. uncheck "ischargen preset" or something like that in the window you edit the Npc with. it's near the top under the name of your npc This worked for me, and I hope it works for you :) P.S. there are two different things I did at the same time, and i did not experiment with them to see which one did the trick. if you'd like to, go ahead.

I'm having the same problem :/ It's really getting annoying. If you find a fix please let me know. I just keep trying to export it over and over but I know it isn't going to magically do it.

Is it possible to apply an animation for blinking of the eyes in Skyrim? NPCs will do it while they have dialogue but never just idly blinking I would do it myself (might take a shot at the creation kit, never done it before) but I'd like to know first of all if something like that already exists, or if it's possible to do. EDIT: This is especially true for the player character. Actually that's the only actual request I have, is a player animation for blinking. EDIT2: I'm sorry, I didn't realize that there's supposed to be blinking in Skyrim but Bethesda broke it... along with some other things. this is very disheartening