KwendaKutomba

I think it’s just a mess there from the plugins, if before that the versions of LE and SSE did not differ. For physics to work, SMP clothes do not need to put physics for the body, only the path between working physics HDT-PE(CBPC). If the SMP plugin loads without errors, then HDT(CBPC) does not work. Install HDT (CBPC)https://www.nexusmods.com/skyrimspecialedition/mods/21224?tab=filesnormally, observing all the requirements for its version (SSE), see if it works; you need clothes, there is a requirement for CBBE SE or TBD SE and put it on, check how it works without SMP, then put what Dymarr gives for SMP, everything has already been converted on his patreon. Do not go into this jungle about weights and points, just set normal HDT-PE physics for your version and ensure that it works with all the requirements, then do SMP. These mods from COCO (daymarr) https://www.patreon.com/Daymarr are made for wide users, there is nothing to configure additionally. I would just give you my config and a set of plugins from the SKSE folder, but we have different versions of Skyrim, you figure it out, it seems to me that you just mixed up all your plugins, installing from LE and SSE, it happens, sometimes I wander to SSE pages myself, they are on different colors ...

install SMP for skyrim special edition, 730 is for the legendary one, how does it even start for you =) Links above, install from Daymarr's patreon.

You pay attention to the installation requirements, maybe you missed something. or download from here specifically under SSE, you seem to have installed SMP for LE, there is no hdtSkinnedMeshPhysics.dll in SSE https://www.patreon.com/Daymarr =) he has links to normal SMP in any clothes. here’s another link for SSE, the site is only in Russian, but Google translator works without problems, yeah. https://gamer-mods.ru/load/skyrim_se/animacija/hdt_smp_skajrim_se/155-1-0-6555

give a screen of the log file from here C: \ Users \ user name \ Documents \ My Games \ Skyrim \ SKSE for skse, that's how I have on the second screen, it shows all the plugins that you load, if hdtSkinnedMeshPhysics is not loaded, there will be an error with number . Depending on the result, you need to look further. As for the equipment, my SMP worked with the old card and old drivers, it should work, if it boots, it just will not work correctly.

Well, I didn’t reinstall the system five years before, I also accumulated a large archive of games with C ++, but I had to format the system disks and lost all these C ++ archives. Skyrim remained on another disk and had to re-register everything, so this problem got out. I just broke my brain already why SMP didn't work. I have installed discrete graphics, thought because of this, because in the new win10, the developers f@cked power management, I had to cut it all and delete it. With Fallout, too, the same dances. A week of work, I wanted to kill people who repaired the video chip, I thought life was over, 450 mods down the drain, but these C ++ saved me =)), so I thought that people were racking their brains why SMP does not work, maybe such a trivial solution will help someone.

in the requirements for SMP it is necessary to indicate that microsoft visual c ++ is strictly required to perform the correct operation, I don’t know which one exactly, since I installed it with a pack, but I have installed from 2005 to 2015 and it start to work, this is for windows 10. I ran into problems when my video chip burned out, I replaced it, reinstalled the system, before that I had an older version of windows 10, after the replacement I had to install the latest one and accordingly lost the entire microsoft visual c ++ archive and before that everything worked fine for me. Since the video chip waited a long time, I was forced to run skyrim on an old, very old system on a single-core pentium and a very old video card, without any openCL, and what was the surprise, SMP worked there (without any SSE 4.2 instructions. Who does not believe I can give a config and screenshots with working SMP), but on the new i7 of the ninth generation - not =). So the problem was solved simply and elegantly by installing the microsoft visual c ++ 2005-2015 pack, two BIOS flashing and two win 10 and win 7 reinstallations were also tried, it didn’t help =))))). And you do not need any openCL \ GL drivers for the processor (intel), the main thing is that the video card supports it. Installing openCL drivers for the processor is simply a matter of reallocating resources. ps. I had error 126 in the skse boot log (C:\Users\user name\Documents\My Games\Skyrim\SKSE) for hdtSkinnedMeshPhysics, so this dll didn’t want to load at all. We are talking about a modified version of SMP 730, 802 I also think it will work. I installed only the SMP path for clothes and hair, HDT-PE left physics for the body. pss/ I also tried to change the language in the system, commas to periods, and so on, everything was useless until I installed microsoft visual c ++ =))) However, I became 13 pages smarter by reading your esteemed forum.=) http://www.picshare.ru/uploads/191111/wM7X0cN8K0_thumb.jpg, http://www.picshare.ru/uploads/191111/31qj01z8j4_thumb.jpg, http://www.picshare.ru/uploads/191111/8F7s0Rj6j9_thumb.jpg, this is to make it clear that everything works together with HDT-PE, with KS Hairdo 's HDT hair without any defaultBBPPs.xml settings, only a modified SMP 730 path PE, to use clothes and SMP hair you do not need to put any SMP physicists on the body.