Eyeballjones

I seem to have found the culprit if anyone is wondering. My feminine running and dash animations had extra skeletons in there to support bbp. Removing them for some reason fixed everything. Just read through the posts about it, seems some have the same issue.

My setup is a GTX 1070, i5 8400 with 16gb DDR4. And I've ran modded skyrim before without this much lag but for some reason this modlist/playthrough is really laggy to me. After attempting to play for a bit, I've found that where I'm lagging During a big fight (6+ people) - can hit around 20-30 fpsLooking at certain structures (College of Winterhold from winterhold, Dragonsreach from the market, have yet to find more)After a big fight and near the corpses - 20-35 fpsRandomly will lose about 20 frames and then go back up after 15 secondsIndoors, depends on the lighting, taverns with a fireplace I can go down to 20 fps. Specifically the room where you fight Lord Harkon with all the lights coming in from the windowCaves and dungeons generally I can look to lose about 20-30 framesThis is all I can think of right now with specifics, but it's definitely not just in these situations and I can probably find more if I played more. To note, I can get 60fps no problem in the open world usually. I also run skyrim on an SSD, but all my mods from mod organizer 2 are on my HDD. I've tried ENBoostSkyrim optimization projectStarting a new saveTurning off ENB (By unchecking the use effect in the menu, sometimes helps gain back 10-15 fps but isn't the biggest factor in the frame loss)Adding "iFPSClamp=30" to general section the Skyrimprefs.ini then also trying "iFPSClamp=60"Setting enblocal.ini "ReservedMemorySizeMb=512" and then trying "ReservedMemorySizeMb=128" These are the most common methods I've tried, but none have worked or made a huge difference. Here is my mod list

im still looking for help if that's possible :(

Do you use boss?

I've been wanting to use the Ultra Stormcloak and city guards texture mod, but I think and I'm pretty that it was the reason it caused my CTDs sometimes. And I was wondering if there's any way in making that armor retexture specific to me. Perhaps making a seperate stormcloak armor and then putting the retexture on that and grabbing the stormcloak armor by console. Any help is appreciated =) PS- For some reason I can't load creation kit. It crashes for me when I try to add update.esm and skyrim.esm

please help? :(

I'm getting a bug where when I go to sleep this one time at the candlehearth inn in Windhelm, I would go outside and everything would be black. This is only outdoors and is only when enb is enabled. When I press shift-f12 everything is looks ok. Any help is appreciated.

*SOLUTION* ahh, so I don't know how this fixed it and stuff but like I just turned on vsync in my nvidia control panel for skyrim and this fixed it =) NOICE

I'm getting a CTD everytime I try to hand in Bleak Fall's Barrow ( After I hand in the Dragonstone and Irrileth walks in the room ) it happens every time Irrileth just walks in the room and looks like she's just about to speak. I'm also getting a ctd when I try to skip time whether it be 1 hour or 12 hours. I also crashed when I leave dragon's reach and when I'm on the stairs going down to the Whiterun I get a CTD there too. There's probably more but I can't do anything else besides get these crashes, please help, I can't play the game ><.

Also when I'm moving, it would have to be jogging forward, left or right. Backwards or walking doesnt work

I'm having a bug where the hud only shows if I'm moving or have a weapon out, I have a strong feeling it was because of immersive hud ( iHud ) but I uninstalled it ( First disabling the mod ingame, and then uninstalling it ) but the problem persisted. Also I'm going back to my old saves and I still have the problem. This is really annoying, because to see the names of items or people, i would have to walk back and forth to keep their name on the screen and to check the compass I would have to keep walking and stuff.

I typed this before I died, and while I died, removed nothing and still died the same way. Thanks for trying though edit: This is a papyrus log from when I died. And I found that sexlab submit is found still in the logs, although I don't know what they're saying, it's still there and I should have uninstalled it, perhaps any way I can completely clean a save from a script based mod?

New note- I loaded from one of my first saves and I died with no problems, so I believe ( with the little knowledge of how these mods work ) that one of the mod's scripts ( Probably sexlab submit ) is still playing and is messing up my deaths. So I'm going to try to find out if this could be the case on the sexlab submit support forum, and I'll post what I find

Cleaning my mods didn't fix it. So any help would still be appreciated :(

I'm getting this bug where when I die, instead of rag-dolling, my character will just kneel down and try to stand back up back and forth and the camera is really screwed up at this point too. And then this would just go on forever until I quit or load the saved again, where it would then run normally, until I die again of course. This isn't really game breaking, but it is super annoying and I do want to download this mod again ( sexlab submit ) but I'm almost certain this would make it not work. I'm also just about to try to clean my dirty edits after I backup my skyrim, so if this works, I'll post it here. There are my mods- Edit: Just to add I did have sexlab submit before, but I just uninstalled it now to see if it would fix my problem. It didn't.

well how should i get started, and how long estimated would it take for me to learn how to do this?

So, I'm just wondering, how could I edit a specific hair to work with my character's body. Atm, the hair I'm using is clipping and I just want to move the piece that is clipping off to the side. I'm looking for the easiest way to do this. Note: I have very little experience with mesh editing.

Just yesterday I had a power outage while I was playing Skyrim, and then today I can't load skyrim now via SKSE loader. It worked yesterday but today it just opens it with the command prompt briefly, and then nothing loads. I go to command processes and TESV only takes up 256-300K. I tried reinstalling SKSE, but that didn't work either. I can only load my first save at Helgen with the skyrim launcher, but I can't open anything after that probably because I use a custom race. Also, after I load skyrim with the SKSE launcher, after about 5-10 minutes I get a notification saying "Skyrim has stopped working A problem caused the program to stop working correctly windows will close the program and notify you if a solution is available." SKSE Logs

Did you try just reopening NMM?

I can only load my first save at Helgen with the skyrim launcher, but I can't open anything after that probably because I use a custom race. Also, after I load skyrim with the SKSE launcher, after about 5-10 minutes I get a notification saying "Skyrim has stopped working A problem caused the program to stop working correctly windows will close the program and notify you if a solution is available."

Just yesterday I had a power outage while I was playing Skyrim, and then today I can't load skyrim now via SKSE loader. It worked yesterday but today it just opens it with the command prompt briefly, and then nothing loads. I go to command processes and TESV only takes up 256-300K. I tried reinstalling SKSE, but that didn't work either. Also, skyrim launcher works, but it can't load in game. Maybe because my game has a lot of mods and I logged out in a house mod. Any help is appreciated. SKSE Logs

So I'm trying to edit an apachiiskyhair to fit my unp body, but I've actually never used creation kit before so I'm not sure where to start. I managed to load all my things and I see the apachiiskyhair file but I can't bring it to the render window and I'm not even sure if it goes there, any help is appreciated

This is probably going to get ignored because I'm not sure who could actually help me but.. I'm using http://www.nexusmods.com/skyrim/mods/12951/? - Enhanced Character Edit http://www.nexusmods.com/skyrim/mods/35713/? - ECEE Apachi sky hair http://www.nexusmods.com/skyrim/mods/35327/? - SG Female Eyebrows http://www.nexusmods.com/skyrim/mods/35267/? - Sg female textures renewal And I'm trying to get my character to look like this http://static1.nexusmods.com/15/mods/110/images/42656-4-1385038031.jpg http://static2.nexusmods.com/15/mods/110/images/42656-2-1385038031.jpg http://static2.nexusmods.com/15/mods/110/images/42656-3-1385038031.jpg But I can't seem to get it right, I'm not sure what i'm doing wrong and maybe someone who's really good at racemenu can help me =(. https://imageshack.com/i/0end7bp - 1 of my attempts I would really really appreciate it if someone could help me =)

is there a mod that shows the effects(resist poison, restore stamina, restore health, etc. ) of an alchemy ingredient by just hovering over it. ( Not having it in your inventory) Or is there a way I can do this?

I'm wondering if there's a mod out there right now that shows the known effects of an ingredient before picking it up and just mousing over the ingredient. Because right now it only shows the weight and value. If not, I'd really appreciate it if someone would make this mod =)