FalloutNINJA101 Posted December 16, 2013 Share Posted December 16, 2013 I'm new to modding, but a veteran Fallout Fan since the original. One of the few things I have always wanted was a full-auto, BLUE, plasma rifle. There are alternate colored lasers and such, but that's not what I'm looking for. The plasma itself should be blue, or maybe even red...It should have a sturdy, assault style stock. The default one for all plasma rifles just doesn't look durable enough for prolonged use. Want it to be similar in style to Multiplas Rifle. Needs simple iron sights without a lot of clutter blocking out field-of-view. Should also have visibly larger clip. I really like the look of the claws on the P-94 and Plasma Caster. Have those alternately spaced between the 3 Multiplas barrels. Right side should have something to visually offset it, like custom aperatures and hoses/wires placed similarly to the regular Plasma Rifle. Body should be black with silver ports. Is it possible to make the barrels and claws spin, Gatling style? Maybe it starts without the claws, stock, and larger clip and those are its mods. Doesn't need super high rate of fire. Should have higher DAM that other plasma weapons. Value of 7777 I really liked the look of hideouscircus's C-51s Razorback Armor but didn't feel the same for the helmets. I really liked the Elite Riot Gear. What I propose is taking a smaller version of the FO3 Enclave Power Armor chest and stomach pieces under a Riot Gear duster, with legs like the T-45d set both in grey/black. The duster should be black, and ideally have the Enclave power pack. Either T-45d, Tesla, Enclave, or Riot Gear shoulder plates. Maybe the left plate is from Riot Gear and the right is one of the others. Needs a left bracer as well. Can that bracer have a curved blade starting near the wrist and extending past the elbow attached to it? A slightly larger version of the Advanced Riot Gear Helmet (maybe as separate mask and helmet pieces) also done in black. If a 2 part helmet can be done, the gas mask part should be separate from the lenses and helmet, with a black balaclava underneath. Lenses should be black or blue. The number 115 on the left side, Old World flag on the right. All headgear pieces should be set so they have their own equip slot if possible, so they can be used with targeting visors/monocles. Armor MUST be listed as power armor so it can be used with the Powered Power Armor mod. Armor should give +1 to Strength and Endurance, +35 rad, poison, and fire resistance, +30 carry weight and action points. Helmet gives +1 Perception, Charisma and Luck. Armor weighs 25lbs, has 40DT, Value of 11,500 caps. Helmet weighs 7lbs, has 7DT and is worth 1150 caps. Both should have higher than normal item Hp. These are only my first 2 ideas. I have so many more for armor, weapons, quests, factions, player housing, etc. If these sound even remotely like something you might like to work on, feel free to do as you please. If anyone makes these you can have all the credit. I just want them in my game, preferably in a box at the Old Nuclear Test Site. Thanks. Link to comment Share on other sites More sharing options...
FalloutNINJA101 Posted December 17, 2013 Author Share Posted December 17, 2013 Why is it so hard to find someone who will take me seriously? I just need pointed towards a modder willing to give me 5 mins of their time. That's all. I just want a response, from anyone at this point... Link to comment Share on other sites More sharing options...
devinpatterson Posted December 20, 2013 Share Posted December 20, 2013 I have a few ideas on this one FalloutNINJA101, and I'll chime in tomorrow morning or over the weekend, brother. Link to comment Share on other sites More sharing options...
FalloutNINJA101 Posted December 20, 2013 Author Share Posted December 20, 2013 Hey thanks a lot. If you get on in the morning I might still be on if you want to discuss anything. Link to comment Share on other sites More sharing options...
devinpatterson Posted December 21, 2013 Share Posted December 21, 2013 I'm new to modding, but a veteran Fallout Fan since the original. One of the few things I have always wanted was a full-auto, BLUE, plasma rifle. There are alternate colored lasers and such, but that's not what I'm looking for. The plasma itself should be blue, or maybe even red... It should have a sturdy, assault style stock. The default one for all plasma rifles just doesn't look durable enough for prolonged use. Want it to be similar in style to Multiplas Rifle. Needs simple iron sights without a lot of clutter blocking out field-of-view. Should also have visibly larger clip. I really like the look of the claws on the P-94 and Plasma Caster. Have those alternately spaced between the 3 Multiplas barrels. Right side should have something to visually offset it, like custom aperatures and hoses/wires placed similarly to the regular Plasma Rifle. Body should be black with silver ports. Is it possible to make the barrels and claws spin, Gatling style? Maybe it starts without the claws, stock, and larger clip and those are its mods. Doesn't need super high rate of fire. Should have higher DAM that other plasma weapons. Value of 7777 I'v done re-colored lasers (mostly blue for the OWB expansion, primarily in the z-38 lightwave research facility). It's primarily changing vertex colors in nifskope. When I get some free time I'll see how many values there are in there for the green plasma. I believe there is already a blue energy impact, so we won't have to worry about that part. Adding prongs and a different stock to the multiplas model is no problem. The only thing that can really trip me up on that model is sometimes blender won't properly export some special effects (like the arc on teh tesla beacon canon) so I have to copy blocks, which sometimes works. I only use a cowboy loadout so I'm not familair with teh multiplas and whether it has any special visual effects on the model. Hoses and wires shouldn't be a problem. Re-texturing black shouldn't be a big problem. If you want a gating animation, then your only choice is really to use the gatling laser as a base. Anyway that's the basic outlook on your project feasibility. My free time is shot, but I'll see if maybe I get a chance to squeeze in some time to look at it. Link to comment Share on other sites More sharing options...
FalloutNINJA101 Posted December 21, 2013 Author Share Posted December 21, 2013 (edited) The only effect the Multiplas should have is the inner plasma effect inside the portholes, but that wouldn't even matter to me. Ya, I figured there was probably a hard coded reason rifles don't have moving parts. I have only seen 1 mod that had a rotating rifle barrel and it wasn't even on the nexus. That detail was just a pipe dream. But just making it automatic instead of semi-auto is doable right? Or even fast-as-you-can-pull-the trigger semi auto. And on a side note, might be a cool weapon to add to the OWB Expanded mod. I can't imagine trying to manage all the projects you're working on. Thanks for taking the time to help me with this. Edited December 21, 2013 by FalloutNINJA101 Link to comment Share on other sites More sharing options...
Recommended Posts