Ranokoa Posted December 2, 2009 Share Posted December 2, 2009 For Fort Death i requested by helborne to make me a combination of two fort hallway peices with a slight edit in their features. He did this flawlessly. But for a new room the very same mesh is needed, however, there is a tiny problem as the way it currently is it will not work here. http://tesnexus.com/downloads/file.php?id=25053 He made a combination of a broken ceiling and a pit hole with a larger hole, but for this new purpose the hole in the ceiling has to have no top whatosever. By that, i mean, imagine the hole in the ceiling and someone falling right towards it from above. Because the top is there they would fall on it rather than through it and through the other hole. I was wondering if someone might be willing to edit this a bit and simply take out the top of the ceiling hole so ita through and through. It shouldn't be all that difficult, but i have no idea what to do with blender and or nifskope and i haven't the time to learn. The collision part of it should also be taken out so an NPC can literally fall from above the hole in the ceiling, through it, and through the pit hole on the floor. Credits will be given of course to the person who does this, as well, to helborne again for the original edit. Link to comment Share on other sites More sharing options...
Recommended Posts