Monkeyuncle8 Posted March 27, 2010 Share Posted March 27, 2010 ok so I have been having this problem with collision on two objects I made a gear and a rockI tested out the objects in the CS and it did not have any problems, but when I go into the game they stuck in the floor wherever I put themthis is not the first time I have done collision so I do know how to do it correctly, but I have no idea what is wrongps. the collision for the objects are relatively simple Link to comment Share on other sites More sharing options...
Guest Kromagnum Posted March 27, 2010 Share Posted March 27, 2010 Have you checked the collision model properties in NifScope. Sounds like the collision area is smaller than the object itself. You say you checked in CS. Does that mean you settled them using the Havok Sim? The first answer above was based on a yes answer here. This would be a good step if the answer is no. Update this thread as needed, and we can go from there. Physics simulation and Havok especially, can be "peculiar" at best. Hard to plan trouble shooting several steps ahead. Link to comment Share on other sites More sharing options...
Monkeyuncle8 Posted March 28, 2010 Author Share Posted March 28, 2010 yeh i did the havok sim in the construction set, and I think it may be the properties, because I took it from another mesh so ill check that on nifskope Link to comment Share on other sites More sharing options...
Recommended Posts