Jump to content

Can't fix my FPS drops inside Institute. Help?


dukemordred

Recommended Posts

 

What resolutions you use?

 

I'm running on AMD fx-8320 and Gtx 760, 12GB ram

 

I haven't been in institute yet, but reading this im afraid i get lags.

 

I play on 1600x900 resolution on my 32" fullhd tv though. Any bigger resolution makes any text too small for my like.

Generally, if your CPU meets the minimum requirements, the game should run, but only with everything turned down to their minimum settings.

Most PC issues like this are actually self inflicted, by the natural tendancy to want the best settings.

Only the latest kit should play any new game on Ultra+. If your PC meets the minimum requirements always use the lowest settings.

When most have no problems, but you and a few others do, if dropping to minimum serttings, doesn't solve your issues, it's possible only a component upgrade will.

 

I don't know AMD CPU's at all, but the graphics card is good enough and it's listed as an 8 core CPU.

So appears well above minimum, but with that GPU, Ultra+ is clearly to high.

If you see issues, try minimum everything and that should run fine,

PC's aren't like consoles they range from weaker than console to about 3 or 4 times better than them. That;'s why we have variable settings.

We all want and can use Ultra+, most must accept some loss of performance, to run on ultra. Only you can decide what you will accept and what you won't.

The standard is 1080p @ 60FPS, if your standard is higher, say 1440p @ 144+ FPS, then you need the latest kit.

900p which you use, is less to render, that may be all the difference you need.

 

 

Ok, thanks.

 

Game been running fine with High settings, but i have tweaked some light and shadow settings to be lower for smoother play.

If Institute lags I just turn settings down little. Or maybe just turn reflections off, and see if that's the problem.

Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...