ccmechanic2 Posted May 27, 2011 Share Posted May 27, 2011 I have the same TV , I use the HDMI But I had to switch the pinout on the mother board for that to work right. VGA Flashes if I use it too. But not HDMI ! 55" set LCD Link to comment Share on other sites More sharing options...
RazielSilver Posted May 27, 2011 Author Share Posted May 27, 2011 I have the same TV , I use the HDMI But I had to switch the pinout on the mother board for that to work right. VGA Flashes if I use it too. But not HDMI ! 55" set LCD I'm using HDMI cable on a plasma 46" screen. I am a total noob on that. I am not familiar with "pinout" Link to comment Share on other sites More sharing options...
RazielSilver Posted May 27, 2011 Author Share Posted May 27, 2011 http://sites.amd.com/us/game/downloads/Pages/radeon_win7-64.aspx#2) display driver only ...Center tab top down load button. try this first if it does what you wand, then get the full package. when you get the full packages. you have to uninstall what you tried first, re boot, then install the software suite .after the suite is in stalled. you can reinstall the display driver to update it. I'll wait for you to do this Ok. If I have 11.5 already do I need to try installing the Driver standalone on the link you gave me as well? because I already have the latest CCC suite. Link to comment Share on other sites More sharing options...
ccmechanic2 Posted May 27, 2011 Share Posted May 27, 2011 The PC came with an owners manual. It contains Explicit instructions to follow to enable what you do not have enabled right now. The set is drawing more than what the PC can put out . So it's not a game issue. It's a hardware issue. Take your time and go through the paper work, get it straight in your mind first before attempting to mess with it. IF you don't trust your self, Recommend some one who is more familiar with this kind of thing. Link to comment Share on other sites More sharing options...
ccmechanic2 Posted May 27, 2011 Share Posted May 27, 2011 Ok. If I have 11.5 already do I need to try installing the Driver standalone on the link you gave me as well? because I already have the latest CCC suite. No, Do the right thing first, make sure first that the unit is setup properly. I do this for offices all the time. Link to comment Share on other sites More sharing options...
RazielSilver Posted May 27, 2011 Author Share Posted May 27, 2011 The PC came with an owners manual. It contains Explicit instructions to follow to enable what you do not have enabled right now. The set is drawing more than what the PC can put out . So it's not a game issue. It's a hardware issue. Take your time and go through the paper work, get it straight in your mind first before attempting to mess with it. IF you don't trust your self, Recommend some one who is more familiar with this kind of thing. The thing is I built the PC. is this something that needs to be done in the BIOS or somewhere else? I only ask to narrow down where to look in the instruction manual. Link to comment Share on other sites More sharing options...
ccmechanic2 Posted May 27, 2011 Share Posted May 27, 2011 It will be a 10 or 12 tripple row pin set very close to the HDMI input on the main board , The pin thing is long. If you had a diagram in a pdf of the unit of the main boards cd rom, I could tell you where and what. Link to comment Share on other sites More sharing options...
RazielSilver Posted May 27, 2011 Author Share Posted May 27, 2011 It will be a 10 or 12 tripple row pin set very close to the HDMI input on the main board , The pin thing is long. If you had a diagram in a pdf of the unit of the main boards cd rom, I could tell you where and what. Are we talking about the Mother board, because mine doesn't have anything that fits that description. the HDMI and VGA connectors are on my graphics card. I'm sorry if I'm not getting what you're talking about. There isn't anything that is 10/12 triple row. The graphics card has a a triple rowed port and I use an adapter for my HDMI cable to fit it. Link to comment Share on other sites More sharing options...
RazielSilver Posted May 27, 2011 Author Share Posted May 27, 2011 It will be a 10 or 12 tripple row pin set very close to the HDMI input on the main board , The pin thing is long. If you had a diagram in a pdf of the unit of the main boards cd rom, I could tell you where and what. Not a PDF but it is the best I could find quickly. ASUS p6x58d / Sapphire Radeon HD 5970 Dual Link to comment Share on other sites More sharing options...
ccmechanic2 Posted May 27, 2011 Share Posted May 27, 2011 Give me a sec I am all excited and have to calm down , I just ran a prelnim on my mod and I am blown away. I was so dam right it isn't funny.I went nuts posting my own link. I have to make a video too. I am on dial up so I am waiting for a blow up to load. Link to comment Share on other sites More sharing options...
Recommended Posts