alerossi82 Posted October 27, 2011 Share Posted October 27, 2011 Hello everybody, I know I'm not the first one to start such a topic and I apologize in advance for that; the fact is that I just started playing Oblivion and I'd like to get the best out of my system but, considering all different resolution and graphic options available, I feel a bit lost My system is a Pentium dual CPU 1.73 GHZ, 2,00 GB RAM, graphic card ATI Mobility Radeon HD 2400, monitor max resolution is 1280x800 (it's a laptop); to get a good framerate for a decent quality, which settings do you recommend to me? Please consider I'm more interested in performance than in graphic quality, so I'd better decrease the resolution or disable some graphic option if that would grant me a fixed 30 fps in ourdoors locations. Link to comment Share on other sites More sharing options...
David Brasher Posted October 30, 2011 Share Posted October 30, 2011 (edited) Trial and error would probably be the best approach. There is so much variation in hardware and background software that it is hard to advise people. Try playing with your settings all the way up for a beautiful game. If it is laggy, then turn them down. Keep on lowering the settings until the game performs well. If the game is now too ugly, turn the settings up a bit and find the best balance between ugly and laggy. Edited October 30, 2011 by David Brasher Link to comment Share on other sites More sharing options...
alerossi82 Posted October 30, 2011 Author Share Posted October 30, 2011 Trial and error would probably be the best approach. There is so much variation in hardware and background software that it is hard to advise people. Try playing with your settings all the way up for a beautiful game. If it is laggy, then turn them down. Keep on lowering the settings until the game performs well. If the game is now too ugly, turn the settings up a bit and find the best balance between ugly and laggy. Hi David, thank you for your reply. Yes I agree, trial and error is the best way and in fact it is what I'm doing right now, anyway my point was that, with so many different graphic settings (antialiasing, texture detail, view distance etc.) it is hard to get a clear picture of what is dramatically affecting the fps and what is not. That's why I started this post: to ask more experienced players what are those settings that you recommend to decrease/disable since either they significantly affects performance or have a limited effect on the visual quality and, on the other hand, those that you better suggest not to turn off/to keep at the maximum value. Link to comment Share on other sites More sharing options...
alerossi82 Posted October 30, 2011 Author Share Posted October 30, 2011 Trial and error would probably be the best approach. There is so much variation in hardware and background software that it is hard to advise people. Try playing with your settings all the way up for a beautiful game. If it is laggy, then turn them down. Keep on lowering the settings until the game performs well. If the game is now too ugly, turn the settings up a bit and find the best balance between ugly and laggy. Hi David, thank you for your reply. Yes I agree, trial and error is the best way and in fact it is what I'm doing right now, anyway my point was that, with so many different graphic settings (antialiasing, texture detail, view distance etc.) it is hard to get a clear picture of what is dramatically affecting the fps and what is not. That's why I started this post: to ask more experienced players what are those settings that you recommend to decrease/disable since either they significantly affects performance or have a limited effect on the visual quality and, on the other hand, those that you better suggest not to turn off/to keep at the maximum value. Link to comment Share on other sites More sharing options...
Rydan Posted October 31, 2011 Share Posted October 31, 2011 800x600 can be viewed at a fairly decent frame rate even with a low-end graphics card. Tweaking the other in-game graphics settings can affect performance a LOT, e.g. the distance/amount of grass, trees and items you want to use, self shadows, etc. As for the settings in the oblivion.ini file, I experimented a lot but there seems to be very little advantage in tweaking them - especially if you don't have enough ram for caching. The only essential change I'd recommend is using the Stutter Remover mod (and, if you plan on adding more RAM to your laptop, apply the 4gb patch.) Link to comment Share on other sites More sharing options...
bben46 Posted October 31, 2011 Share Posted October 31, 2011 Here are my Slow Game suggestionshttp://wiki.tesnexus...ing_a_slow_game The first thing you will see is your processor is actually below the minimum required and way below the recommended 3Ghz. When the chip makers started making dual processor CPUs, they cut the speed to reduce overheating. Their expectation was that two 1.5Ghz processors would out perform a single 2Ghz. However, that only works if the software is written for multiprocessor use - which Oblivion is not. The dual processor will still help some though, probably allowing you to play at the lowest settings. The Tweak guides will have many suggestions to help out. Be sure to tweak the Operating system first, then the Video card, and the game last. Be sure you don't have any unneeded background processes running as they can kill fps as well as cause crashes. :thumbsup: Link to comment Share on other sites More sharing options...
Rydan Posted October 31, 2011 Share Posted October 31, 2011 (edited) Be sure to tweak the Operating system first, then the Video card, and the game last. Be sure you don't have any unneeded background processes running as they can kill fps as well as cause crashes. :thumbsup: Good advice, I forgot about the OS. I created a batch file to disable all unneeded services in Windows 7, I usually run it before playing any cpu-intensive game like Oblivion: taskkill /f /im jusched.exeecho y | net stop WinHttpAutoProxySvcecho y | net stop wuauservecho y | net stop wscsvcecho y | net stop SysMainecho y | net stop lmhostsecho y | net stop WdiServiceHostecho y | net stop WdiSystemHostecho y | net stop SSDPSRVecho y | net stop TrkWksecho y | net stop HomeGroupProviderecho y | net stop FDResPubecho y | net stop PcaSvcecho y | net stop LanmanServerecho y | net stop FontCacheecho y | net stop WMPNetworkSvcecho y | net stop WbioSrvcecho y | net stop WPDBusEnumecho y | net stop WerSvcecho y | net stop AeLookupSvcecho y | net stop WinDefendecho y | net stop ehRecvrecho y | net stop ehSchedecho y | net stop Dnscache Just copy & paste the commands above in Windows' notepad and save the file on your desktop as SOMETHING.bat then when you want to play click on it. A lot of ram and cpu time are saved and, if you have any problems, you can just reboot and everything is back normal (your system configuration is only changed temporarily.) Also if you don't need Windows' Firewall (e.g. you have another one installed, you're not online, etc.) you can add this command to the list above: echo y | net stop MpsSvc Edit: make sure to run the file as Administrator. Edited October 31, 2011 by Rydan Link to comment Share on other sites More sharing options...
Zapata935 Posted November 2, 2011 Share Posted November 2, 2011 (edited) Dear Alerossi82, If it is any help, check out the wiki and the .ini tweaks! I have a really old machine now but with the OBGE v3 core and the tweaks applied by the said file on the wiki, I have quadrupled the gameplay speed and graphics. Combat even in front of an Oblivion gate runs much faster than before. With the hardware you have on your PC, the game should run like a scalded dog, i.e fast. Best Wishes Zapata935. P.S 1024x768 is the optimum setting for screen res in my opinion! Edited November 2, 2011 by Zapata935 Link to comment Share on other sites More sharing options...
Recommended Posts