Stargazer09 Posted June 15, 2016 Share Posted June 15, 2016 I'm trying to convert the boatshed into a workshop space, and I'd like to cover the centre part so that I have contiguous floor space. Any ideas how to do it? Wooden floors just won't snap into place. Link to comment Share on other sites More sharing options...
TheGadget1945 Posted June 15, 2016 Share Posted June 15, 2016 I have converted it to sleeping quarters and placed Friffy's Fixed Rugs over the slipway. If that would be too posh for a workshop, those black rubber square floor tiles found in the Sanctuary houses make a nice solid floor. Link to comment Share on other sites More sharing options...
CiderMuffin Posted June 15, 2016 Share Posted June 15, 2016 The wood platforms are pretty good for that. It's made easier with place everywhere. Link to comment Share on other sites More sharing options...
bobofudd Posted June 15, 2016 Share Posted June 15, 2016 This was a tough one to manage. I wanted to do the same thing but I didn't like how the door opened up and blocked the way of getting in. I did eventually put my workshop in there and used the small floor squares, starting with putting one on the walkway, and made a path that covered half of the water (in case I wanted to go diving from the workshop). Link to comment Share on other sites More sharing options...
HandofBobb Posted June 16, 2016 Share Posted June 16, 2016 did you try using the wood foundation that's on posts? I was able to do similar at Egret Tours using them. otherwise, like bobofudd said, you can put one of the small floor pieces down on the existing walkway and use it to snap other floors to. Link to comment Share on other sites More sharing options...
Stargazer09 Posted June 16, 2016 Author Share Posted June 16, 2016 (edited) Thanks for your suggestions. I had used a wooden bridge part and laid rugs on top of it but it was unsatisfactory. Gaps & seams were glaringly obvious.I'll try again with some of your suggestions. PS: I don't suppose there's a way of removing the stairs that go down into the water, the door, and those booby trap devices? Edited June 16, 2016 by Stargazer09 Link to comment Share on other sites More sharing options...
TheGadget1945 Posted June 16, 2016 Share Posted June 16, 2016 Thanks for your suggestions. I had used a wooden bridge part and laid rugs on top of it but it was unsatisfactory. Gaps & seams were glaringly obvious.I'll try again with some of your suggestions. PS: I don't suppose there's a way of removing the stairs that go down into the water, the door, and those booby trap devices? Hi, you don't have to use the wooden bridge since rugs (or the floor tiles I mentioned ) act as a rigid floor. I have a couple of the "Scrap" mods and I was able to delete the little moorings posts, the only thing that wouldn't go was the vice the booby trap gun was held in. Link to comment Share on other sites More sharing options...
Stargazer09 Posted June 16, 2016 Author Share Posted June 16, 2016 Thanks Gadget. The Small Shack Floors worked pretty good, and I just covered the gaps with large rugs. I'm a happy camper now. :) Link to comment Share on other sites More sharing options...
Recommended Posts