Crash in vault 101 atrium

[Purr4me]

on game launch, "prior" to clicking on continue, open the settings button and set your preferences there instead of directly editing ini files. load thew game.

test key's , hard save and hit ESC reload that last saved game and continue.

 

If you need vanilla default ini files, I can provide them for you, just don't edit them. Let the game and launcher edit them.

 

If that works, then things are ok, but if you continue to see this problem with ini edits ?

1 of two things are bad.

1. your PC has a macros virus on it and is not getting caught.
2. you made a mistake in the manual edit.

[Purr4me]

Google Malware Bytes and install a demo and run it.

[Purr4me]

you sent me a fallout3.ini file it's not a pref's file

Binary verified

[Purr4me]

what are you doing there? you can't / can not rename the default file and use IT as a prefs file.

Edited August 6, 2016 by Purr4me

[Purr4me]

I backed up this thread for future references.

[dafrandle]

running FOSE?

No

 

on game launch, "prior" to clicking on continue, open the settings button and set your preferences there instead of directly editing ini files. load thew game.

test key's , hard save and hit ESC reload that last saved game and continue.

 

If you need vanilla default ini files, I can provide them for you, just don't edit them. Let the game and launcher edit them.

 

If that works, then things are ok, but if you continue to see this problem with ini edits ?

1 of two things are bad.

• your PC has a macros virus on it and is not getting caught.
• you made a mistake in the manual edit.

 

I did not directly edit the ini files, All I did was bind the keys with ingame settings menu

 

I gave you FalloutPrefs.ini becuse that's where data for keybinds is stored which is the only thing that changed, once again I never edited these files by hand, I assumed that you would need it to do something with it?

 

 

what are you doing there? you can't / can not rename the default file and use IT as a prefs file.

 

 

Oh gosh i would never rename an ini file for a game that's like shooting yourself in the face.

 

 

you sent me a fallout3.ini file it's not a pref's file

Binary verified

 

 

You want my Fallout3.ini?

Attached

[dafrandle]

Here is ordered list of what I did last night

 

1. Un-Installed Fallout 3 with Revo Uninstaller Pro (Free Trial)
2. Install Fallout 3 Again
3. Activated the DLC and made the load order correct
4. Played the game and did not experience crash on entering atrium
5. Quit the game (was going to post here but decide i should test it to end of valt)
6. Re-bound keys with ingame settings
7. Crashed when I entered atrium
8. Deleted FalloutPrefs.ini (this holds data for keybinds) so the game would build a new vanila file
9. Played the game again, no crash in atrium
10. Without quitting the game re-bound keys with ingame settings menu
11. Loaded save again (without quitting)
12. Crashed when I entered atrium

[Purr4me]

right click the engine and select properties, select details. screen shot that, post that here.

[Purr4me]

Binary is almost the same, slight changes but close enough.

I'm going to show you instead because you need to realize...something here is very wrong.

 

Kitty

[Purr4me]

All I should ever see in the pref's file is this.

 

[Display]
sD3DDevice="AMD Radeon HD 6550D"
iMaxDecalsPerFrame=10
iTexMipMapSkip=1
iWaterMultisamples=4
bTransparencyMultisampling=1
fSpecularLODStartFade=2000.0000
fShadowLODStartFade=1000.0000
fLightLODStartFade=3500.0000
bDrawShadows=1
iActorShadowCountInt=6
iActorShadowCountExt=6
iShadowFilter=2
iShadowMapResolution=1024
iAdapter=0
iSize W=1152
iSize H=648
iMultiSample=4
iMaxAnisotropy=15
iPresentInterval=1
bFull Screen=1
fDecalLOD2=1500.0000
fDecalLOD1=1000.0000
iTexMipMapMinimum=0
iShadowMode=3
iMaxSkinDecalsPerFrame=3
iScreenShotIndex=0
fGamma=1.1867
[Grass]
b30GrassVS=1
fGrassStartFadeDistance=7000.0000
[imagespace]
iRadialBlurLevel=2
bDoDepthOfField=1
[Water]
bUseWaterRefractions=1
bUseWaterReflections=1
bForceHighDetailReflections=1
bAutoWaterSilhouetteReflections=0
bUseWaterDepth=1
bUseWaterDisplacements=1
iWaterReflectWidth=1024
iWaterReflectHeight=1024
bUseWaterReflectionBlur=1
iWaterBlurAmount=4
[TerrainManager]
fTreeLoadDistance=40000.0000
fBlockLoadDistanceLow=50000.0000
fSplitDistanceMult=1.5000
fBlockLoadDistance=125000.0000
[LOD]
fLODFadeOutMultActors=15.0000
fLODFadeOutMultItems=15.0000
fLODFadeOutMultObjects=15.0000
[blurShaderHDR]
bDoHighDynamicRange=1
[blurShader]
bUseBlurShader=0
[Launcher]
bShowAllResolutions=1
uLastAspectRatio=3
[Decals]
uMaxDecals=100
[Audio]
fDefaultRadioVolume=0.4000
fDefaultMusicVolume=0.3000
fDefaultEffectsVolume=0.8400
fDefaultVoiceVolume=0.8000
fDefaultFootVolume=0.2800
fDefaultMasterVolume=0.2800
[Controls]
fXenonVertLookSpeed=1200.0000
fXenonHorizLookSpeed=1500.0000
bGamePadRumble=1
bInvertYValues=0
fMouseSensitivity=0.0020
Forward=00C8FF13
Back=00D0FF14
Slide Left=00CBFF17
Slide Right=00CDFF16
Use=00FF0011
Activate=002BFF0A
Block=00380110
Ready Item=0013FF0C
Crouch/Sneak=001DFF08
Run=002AFFFF
Always Run=003AFFFF
Auto Move=0010FFFF
Jump=009DFF0D
Toggle POV=0021020F
Menu Mode=000FFF0B
Rest=0014FF07
Vats=00D3FF0E
Hotkey1=0002FFFF
Hotkey2=0003FFFF
Hotkey3=0004FFFF
Hotkey4=0005FFFF
Hotkey5=0006FFFF
Hotkey6=0007FFFF
Hotkey7=0008FFFF
Hotkey8=0009FFFF
QuickSave=003FFFFF
QuickLoad=0043FFFF
Grab=0052FF09
[GamePlay]
bShowQuestMarkers=1
iDifficulty=2
bDisableDynamicCrosshair=0
bSaveOnInteriorExteriorSwitch=1
bSaveOnTravel=0
bSaveOnWait=0
bSaveOnRest=0
bCrossHair=1
bGeneralSubtitles=0
bDialogueSubtitles=1
[interface]
bHelpEnabled=1
fHudOpacity=0.4000
uPipboyColor=4290134783
uHUDColor=785383423
bDisable360Controller=0

 

 

I have no idea what's going on there, I have never head of such weird things before unless your editing the wrong things, or some other thing is happening. Engine? Regional? language. Mine here is default, it's 3 k in size. Not 22 kb's