xeal Posted November 7, 2016 Share Posted November 7, 2016 Every now and again, I'm running into this glitch where my screen seems to "shift" a direction, be it in first person or third.I've tried reloading the save over and over and when I exit the same door way the glitch would keep happening. Yet when I reload to a slightly earlier save, enter the zone and exit the same door, I do not encounter this screen problem.I describe it as a shift as when I rotate the camera it feels as if the camera is rotating around a fix point and I see my own character off on the side instead of "overhead"Anyone else getting this oddity?Get this with mods enabled and disabled as well with NVDIA's screen cap software enabled/disabled. Link to comment Share on other sites More sharing options...
MallaVelve Posted November 10, 2016 Share Posted November 10, 2016 (edited) Every now and again, I'm running into this glitch where my screen seems to "shift" a direction, be it in first person or third.I've tried reloading the save over and over and when I exit the same door way the glitch would keep happening. Yet when I reload to a slightly earlier save, enter the zone and exit the same door, I do not encounter this screen problem.I describe it as a shift as when I rotate the camera it feels as if the camera is rotating around a fix point and I see my own character off on the side instead of "overhead"Anyone else getting this oddity?Get this with mods enabled and disabled as well with NVDIA's screen cap software enabled/disabled. 20161030151427_1.jpg I am getting this too, but my character is centered, there is just that black box that shows up, occasionaly on transition. This only just started happening yesterday/since the update. Transitioning will fix it but it always comes back . Mine has visible bands on the right and top, most of the time, I have seen different configurations, visible band on left and top, visible band on left only. I had to really hack the screen capture to get under the 250kb size limit. I have been searching for any information about this and this post is all I can find. Obviously the update changed something that is causing this. It might have something to do with screen resolution but I am not sure. I hope this can get resolved. Edited November 10, 2016 by MallaVelve Link to comment Share on other sites More sharing options...
MallaVelve Posted November 10, 2016 Share Posted November 10, 2016 (edited) To add more information on this I will say I have tried both the lattest driver for NVIDIA and a version several generations prior (358.91). It has had no effect on this issue. SSE v1.1.51.0 OS; Windows 10 ProMotherboard; P8H61-M LE/CSMProcessor; Intel i3-3220 @3.30GHzRam; 16 GBSystem Type; 64-bit OS, 64-based processorVideo Card; Nvidia GeForce GTX 650 Ti 2GBDriver Version; 375.70Native Resolution; 1920x1200, 59Hz Edited November 10, 2016 by MallaVelve Link to comment Share on other sites More sharing options...
Higgenboober Posted November 11, 2016 Share Posted November 11, 2016 Are you also getting anything like this? http://imgur.com/a/lsQJ8Where a black square will appear on your screen and keep expanding weirdly until you pan the camera away? Link to comment Share on other sites More sharing options...
MallaVelve Posted November 11, 2016 Share Posted November 11, 2016 No, it is always static and square. Link to comment Share on other sites More sharing options...
jessabelle Posted March 1, 2017 Share Posted March 1, 2017 Getting this glitch now too. Did anyone find a fix? Link to comment Share on other sites More sharing options...
Recommended Posts