ihategoose Posted February 14, 2017 Share Posted February 14, 2017 Hello everybody I have a problem with the Script Merger v0.6.2 When I unpack it from the archive and use I, as per instructions and logic, enter the Witcher 3 dir and then try to refresh conflicts. Instead of showing me the errors and all that all I am shown is the error from the attached image, which persists after pressing continue or quitting and retrying. Also, the information from the "details" screen can be seen in the spoiler section. I use windows 7 ultimate, x64 and a more or less fresh net framework 4 I was not able to locate similar errors through the witcher 3 subreddit of within posts on nexus, which would be on the current version anyways. See the end of this message for details on invokingjust-in-time (JIT) debugging instead of this dialog box.************** Exception Text **************System.BadImageFormatException: Retrieving the COM class factory for component with CLSID {56FDF344-FD6D-11D0-958A-006097C9A090} failed due to the following error: 800700c1 is not a valid Win32 application. (Exception from HRESULT: 0x800700C1).at TaskbarProgress..cctor()************** Loaded Assemblies **************mscorlibAssembly Version: 4.0.0.0Win32 Version: 4.6.1055.0 built by: NETFXREL2CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll----------------------------------------WitcherScriptMergerAssembly Version: 0.6.2.0Win32 Version: 0.6.2CodeBase: file:///C:/Users/Goosefarm%20II.V/Desktop/WitcherScriptMerger.exe----------------------------------------System.Windows.FormsAssembly Version: 4.0.0.0Win32 Version: 4.6.1055.0 built by: NETFXREL2CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll----------------------------------------SystemAssembly Version: 4.0.0.0Win32 Version: 4.6.1055.0 built by: NETFXREL2CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll----------------------------------------System.DrawingAssembly Version: 4.0.0.0Win32 Version: 4.6.1055.0 built by: NETFXREL2CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll----------------------------------------System.ConfigurationAssembly Version: 4.0.0.0Win32 Version: 4.6.1055.0 built by: NETFXREL2CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll----------------------------------------System.CoreAssembly Version: 4.0.0.0Win32 Version: 4.6.1055.0 built by: NETFXREL2CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll----------------------------------------System.XmlAssembly Version: 4.0.0.0Win32 Version: 4.6.1055.0 built by: NETFXREL2CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll----------------------------------------Microsoft.GeneratedCodeAssembly Version: 1.0.0.0Win32 Version: 4.6.1055.0 built by: NETFXREL2CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll----------------------------------------************** JIT Debugging **************To enable just-in-time (JIT) debugging, the .config file for thisapplication or computer (machine.config) must have thejitDebugging value set in the system.windows.forms section.The application must also be compiled with debuggingenabled.For example:When JIT debugging is enabled, any unhandled exceptionwill be sent to the JIT debugger registered on the computerrather than be handled by this dialog box. Thank you in advance for all your help. Link to comment Share on other sites More sharing options...
a1994114a Posted April 4, 2017 Share Posted April 4, 2017 I have the same problem See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text **************System.NullReferenceException: Object reference not set to an instance of an object. at WitcherScriptMerger.Forms.MainForm.menuOpen_DropDownOpening(Object sender, EventArgs e) at System.Windows.Forms.ToolStripDropDownItem.OnDropDownShow(EventArgs e) at System.Windows.Forms.ToolStripMenuItem.OnDropDownShow(EventArgs e) at System.Windows.Forms.ToolStripDropDownItem.ShowDropDownInternal() at System.Windows.Forms.ToolStripDropDownItem.ShowDropDown(Boolean mousePush) at System.Windows.Forms.ToolStripMenuItem.OnMenuAutoExpand() at System.Windows.Forms.MenuTimer.OnTick(Object sender, EventArgs e) at System.Windows.Forms.Timer.OnTick(EventArgs e) at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies **************mscorlib Assembly Version: 4.0.0.0 Win32 Version: 4.6.1637.0 built by: NETFXREL3STAGE CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll----------------------------------------WitcherScriptMerger Assembly Version: 0.6.2.0 Win32 Version: 0.6.2 CodeBase: file:///D:/TW3/scriptmerger/WitcherScriptMerger.exe----------------------------------------System.Windows.Forms Assembly Version: 4.0.0.0 Win32 Version: 4.6.1586.0 built by: NETFXREL2 CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll----------------------------------------System Assembly Version: 4.0.0.0 Win32 Version: 4.6.1637.0 built by: NETFXREL3STAGE CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll----------------------------------------System.Drawing Assembly Version: 4.0.0.0 Win32 Version: 4.6.1586.0 built by: NETFXREL2 CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll----------------------------------------System.Configuration Assembly Version: 4.0.0.0 Win32 Version: 4.6.1586.0 built by: NETFXREL2 CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll----------------------------------------System.Core Assembly Version: 4.0.0.0 Win32 Version: 4.6.1638.0 built by: NETFXREL3STAGE CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll----------------------------------------System.Xml Assembly Version: 4.0.0.0 Win32 Version: 4.6.1586.0 built by: NETFXREL2 CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll---------------------------------------- ************** JIT Debugging **************To enable just-in-time (JIT) debugging, the .config file for thisapplication or computer (machine.config) must have thejitDebugging value set in the system.windows.forms section.The application must also be compiled with debuggingenabled. For example: <configuration> <system.windows.forms jitDebugging="true" /></configuration> When JIT debugging is enabled, any unhandled exceptionwill be sent to the JIT debugger registered on the computerrather than be handled by this dialog box. Link to comment Share on other sites More sharing options...
SithFaced Posted October 29, 2018 Share Posted October 29, 2018 I also have this problem, ppl shouldn't make mods if they can't offer real support. Link to comment Share on other sites More sharing options...
denyanddie Posted June 15, 2019 Share Posted June 15, 2019 is there still no answer to this yet lol? wracking my brain trying to figure this out Link to comment Share on other sites More sharing options...
Partoutatix Posted June 16, 2019 Share Posted June 16, 2019 Have you tried a clean install of SM? By which I mean removing all the script merger files and folders, deleting any existing mergedfiles folder inside your \Mods folder, and temporarily renaming your Mods folder to something else. Then install SM again. I usually install it in the witcher 3 install folder. Then run & configure script merger and hit refresh (shouldn't pick up on any mods since you renamed the Mods folder to something else). If that works try creating a new \Mods folder and copying a couple of your mods into it and hit refresh until you get to merge some conflicting files etc. Once you get SM working I suggest you also add the unofficial patch for it. Link to comment Share on other sites More sharing options...
iScoozi Posted August 11, 2020 Share Posted August 11, 2020 Hey guys this might be a little late but for someone looking to fix this problem what fixed it for me was at the top where is says "Witcher 3 Directory" You need to go to ur files and link it to ur witcher game. So for it goes it looks like this "D:\GOG\The Witcher 3 Wild Hunt GOTY". I hope this help. Link to comment Share on other sites More sharing options...
DeshanRandika Posted August 21, 2020 Share Posted August 21, 2020 Hello everybody I have a problem with the Script Merger v0.6.2 When I unpack it from the archive and use I, as per instructions and logic, enter the Witcher 3 dir and then try to refresh conflicts. Instead of showing me the errors and all that all I am shown is the error from the attached image, which persists after pressing continue or quitting and retrying. Also, the information from the "details" screen can be seen in the spoiler section. I use windows 7 ultimate, x64 and a more or less fresh net framework 4 I was not able to locate similar errors through the witcher 3 subreddit of within posts on nexus, which would be on the current version anyways. See the end of this message for details on invokingjust-in-time (JIT) debugging instead of this dialog box. ************** Exception Text **************System.BadImageFormatException: Retrieving the COM class factory for component with CLSID {56FDF344-FD6D-11D0-958A-006097C9A090} failed due to the following error: 800700c1 is not a valid Win32 application. (Exception from HRESULT: 0x800700C1).at TaskbarProgress..cctor() ************** Loaded Assemblies **************mscorlibAssembly Version: 4.0.0.0Win32 Version: 4.6.1055.0 built by: NETFXREL2CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll----------------------------------------WitcherScriptMergerAssembly Version: 0.6.2.0Win32 Version: 0.6.2CodeBase: file:///C:/Users/Goosefarm%20II.V/Desktop/WitcherScriptMerger.exe----------------------------------------System.Windows.FormsAssembly Version: 4.0.0.0Win32 Version: 4.6.1055.0 built by: NETFXREL2CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll----------------------------------------SystemAssembly Version: 4.0.0.0Win32 Version: 4.6.1055.0 built by: NETFXREL2CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll----------------------------------------System.DrawingAssembly Version: 4.0.0.0Win32 Version: 4.6.1055.0 built by: NETFXREL2CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll----------------------------------------System.ConfigurationAssembly Version: 4.0.0.0Win32 Version: 4.6.1055.0 built by: NETFXREL2CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll----------------------------------------System.CoreAssembly Version: 4.0.0.0Win32 Version: 4.6.1055.0 built by: NETFXREL2CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll----------------------------------------System.XmlAssembly Version: 4.0.0.0Win32 Version: 4.6.1055.0 built by: NETFXREL2CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll----------------------------------------Microsoft.GeneratedCodeAssembly Version: 1.0.0.0Win32 Version: 4.6.1055.0 built by: NETFXREL2CodeBase: file:///C:/Windows/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll---------------------------------------- ************** JIT Debugging **************To enable just-in-time (JIT) debugging, the .config file for thisapplication or computer (machine.config) must have thejitDebugging value set in the system.windows.forms section.The application must also be compiled with debuggingenabled. For example: When JIT debugging is enabled, any unhandled exceptionwill be sent to the JIT debugger registered on the computerrather than be handled by this dialog box. Thank you in advance for all your help.I have the Same Problems with Script Merger V 0.6.5 to use with Witcher 3 Mod Manager V 0.7.11f See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box. ************** Exception Text **************System.NullReferenceException: Object reference not set to an instance of an object. at WitcherScriptMerger.Forms.MainForm.menuOpen_DropDownOpening(Object sender, EventArgs e) in D:\Projects\WitcherScriptMerger\WitcherScriptMerger\Forms\MainForm.cs:line 1039 at System.Windows.Forms.ToolStripDropDownItem.OnDropDownShow(EventArgs e) at System.Windows.Forms.ToolStripMenuItem.OnDropDownShow(EventArgs e) at System.Windows.Forms.ToolStripDropDownItem.ShowDropDownInternal() at System.Windows.Forms.ToolStripDropDownItem.ShowDropDown(Boolean mousePush) at System.Windows.Forms.ToolStripMenuItem.OnMenuAutoExpand() at System.Windows.Forms.MenuTimer.OnTick(Object sender, EventArgs e) at System.Windows.Forms.Timer.OnTick(EventArgs e) at System.Windows.Forms.Timer.TimerNativeWindow.WndProc(Message& m) at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) ************** Loaded Assemblies **************mscorlib Assembly Version: 4.0.0.0 Win32 Version: 4.8.4200.0 built by: NET48REL1LAST_C CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v4.0.30319/mscorlib.dll----------------------------------------WitcherScriptMerger Assembly Version: 0.6.5.0 Win32 Version: 0.6.5 CodeBase: file:///D:/MODS/Manager/script%20merger/WitcherScriptMerger.exe----------------------------------------System.Windows.Forms Assembly Version: 4.0.0.0 Win32 Version: 4.8.4200.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Windows.Forms/v4.0_4.0.0.0__b77a5c561934e089/System.Windows.Forms.dll----------------------------------------System Assembly Version: 4.0.0.0 Win32 Version: 4.8.4200.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System/v4.0_4.0.0.0__b77a5c561934e089/System.dll----------------------------------------System.Drawing Assembly Version: 4.0.0.0 Win32 Version: 4.8.4084.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Drawing/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll----------------------------------------System.Configuration Assembly Version: 4.0.0.0 Win32 Version: 4.8.4190.0 built by: NET48REL1LAST_B CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Configuration/v4.0_4.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll----------------------------------------System.Core Assembly Version: 4.0.0.0 Win32 Version: 4.8.4200.0 built by: NET48REL1LAST_C CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Core/v4.0_4.0.0.0__b77a5c561934e089/System.Core.dll----------------------------------------System.Xml Assembly Version: 4.0.0.0 Win32 Version: 4.8.4084.0 built by: NET48REL1 CodeBase: file:///C:/WINDOWS/Microsoft.Net/assembly/GAC_MSIL/System.Xml/v4.0_4.0.0.0__b77a5c561934e089/System.Xml.dll---------------------------------------- ************** JIT Debugging **************To enable just-in-time (JIT) debugging, the .config file for thisapplication or computer (machine.config) must have thejitDebugging value set in the system.windows.forms section.The application must also be compiled with debuggingenabled. For example: <configuration> <system.windows.forms jitDebugging="true" /></configuration> When JIT debugging is enabled, any unhandled exceptionwill be sent to the JIT debugger registered on the computerrather than be handled by this dialog box. Link to comment Share on other sites More sharing options...
DeshanRandika Posted August 21, 2020 Share Posted August 21, 2020 Hello, I downloaded this recently (2020/08/17) Script Merger V 0.6.5 to use with Witcher 3 Mod Manager V 0.7.11f HARDWARE Processor AMD Ryzen 7 3700X 8-Core Processor(3.60 GHz) Not Overclocked Installed RAM :24.0 GB Primary Windows Installed Memory : SAMSUNG 960 EVO 500GB SSD & 2 other HDDs Motherboard : MSI MPG X570 GAMING EDGE WIFI with Updated BIOS 7C37v18 [NOT THE LATEST BIOS] Graphic card : MSI RADEON RX 5700 8GB MECH OC System type 64-bit operating system, x64-based processor OS Edition : Windows 10 Pro Version:20H2 OS update Installed on:6/18/2020 OS build : 19042.423 Experience:Windows Feature Experience Pack 120.2212.31.0 Windows Insiders Program : Beta Channel The Witcher 3 - Wild Hunt v1.31 GOTY Edition with ALL DLC installed in Separate location in HDD For Modding I used Witcher 3 Mod Manager version 0.7.11f + Script Merger version 0.6.5 after giving witcher3.exe location next we need to provide Script Merger location then after providing Script Merger location to Mod Manager "Run The Script Merger" works fine until I got to Script Merger>Files .... then This exact problem popped up https://drive.google.com/file/d/16B1YNAk9-XBW9JPooPhJCj3jlG6vQxOI/view?usp=sharing I haven't installed any mods other than trying to get Scrip Merger to work with Witcher 3 Mod Manager Link to comment Share on other sites More sharing options...
Recommended Posts