Problem with the Construction Set, please help.

[Gate_Keeper]

Hello all,

I'm having a problem getting the Construction Set to open .esp's.

I'll start up the CS, click on 'open' in the menu bar. Of course the list of your .esm's and .esp's pop up. I can choose ANY .esp and click "Set as active file", the "X" appears in the box to the left of the .esp as it should.

However, when I click on 'OK' to open it I get this message:

 

File Oblivion.esm is a higher version than this EXE can load.

 

Then TECS shuts down after I click 'ok' on the warning message.

 

I have Oblivion, SI, and KOTN installed and patched to the newest version. (1.2.0.416)

 

I've D/L'ed the CS twice now, once from TESNexus and once from somewhere else, they both gave me the same error.

 

I would like to start tinkering and making some new races and whatnot, but this has me dead in the water.

 

Anyone have any suggestions??

 

Gate

[Tamujiin]

Easy peasy.

 

There is a patch where you dl'd the CS. Patch 1.2.404 use that and it will work.

 

otherwise what is going on is the CS and Esp are not the same patch. you might say have a Default instalation ( 1.0 ) and the CS is using a diffrent patch ( 1.2 ).

 

So in otherwords if you have The latest patch which is 1.2.416, you will need the latest CS patch which is..........1.2.404. Dont ask me why its diffrent but thats the latest patches for both.

[Gate_Keeper]

Thankx einhander888 for the fast reply, on my way to d/l now.

 

Gate