FNV 4gb mod

[lesbianwitch]

does anyone know if the 4gb mod for using files like nvm .I went to the link that is on the page for it and it said that that one is no longer updated. However, it seems that the one I have might be causing problems with my game crashing completely at random and sometimes will go over an hour without it. I only have NVM, WME,Eve,more perks, and FNV general.

[dubiousintent]

The 4GB Patcher is for the "FalloutNV.exe" (and "GECK.exe") file. Any mods loaded into the game benefit from it automatically.

 

All of the following may not apply to your specific situation, but are worth repeating anyway.

* Did you install Steam to it's default location? If so, please see the wiki "Installing Games on Windows Vista+" article for why the original default Steam behavior of installing games to the "C:\Program Files" folder tree was bad (they learned better, and don't do that any more); and why "disabling UAC and running as Administrator" is NOT sufficient, with instructions how to move it. This is the single most important thing you can do to fix and protect yourself against problems in the future. As much of a PITA as that is, it's never going to be any easier than now. Please see the 'Restoring to "Vanilla"' section of the wiki "FNV General Mod Use Advice" article as well.

* Are you running Win10? Did you get the "Fall Creator's Update" (FCU aka "RedStone 3")? Do you have "New Vegas Stutter Remover" (NVSR) installed? If all three are "true", then please see the 'Issue: Recent (post-Win10 FCU) CTDs after 10-20 minutes of play' (and other "heap size") entries in the 'Solutions to Performance problems' section in the wiki "Fallout NV Mod Conflict Troubleshooting" guide.

* If you are suddenly having a "slowdown" or lag; or a lack of sound; or problems getting NVSE to load, or really anything new unexpectedly, please see the 'Issue: NVSE - fails to load after update KB4058043 to Win10 FCU (v1709)' entry in the wiki "Fallout NV Mod Conflict Troubleshooting" guide. This may be due to a Windows Update for the "Meltdown and Spectre Vulnerabilities".

* Are you using the 4GB Patcher? If not, please see the 'Maximizing use of memory' section of the wiki "FNV General Mod Use Advice" article.

* If you are using the full 4GB of memory, most likely your CTD problem (now or in the future) is the default "heap size" is too small. It's so common you might as well deal with it now. Please see the 'Solutions to "Crash To Desktop" (CTD) problems' section in the wiki "Fallout NV Mod Conflict Troubleshooting" guide.

* Did you install Steam to it's default location? If so, please see the wiki "Installing Games on Windows Vista+" article for why the original default Steam behavior of installing games to the "C:\Program Files" folder tree was bad (they learned better, and don't do that any more); and why "disabling UAC and running as Administrator" is NOT sufficient, with instructions how to move it. This is the single most important thing you can do to fix and protect yourself against problems in the future. As much of a PITA as that is, it's never going to be any easier than now. Please see the 'Restoring to "Vanilla"' section of the wiki "FNV General Mod Use Advice" article as well.

If you did move Steam out of the default location, then likely any access privilege problem is one of "File and Folder permissions" on the parent "root" folder under which you installed the games. If this is not set correctly to allow at least "System", "Administrators", and "Users" to have "Full Control" then you can't overwrite other files or make changes. You then need to enable the "Properties | Security | Advanced | Change Permissions" setting of the parent folder to enable the box: "Replace all child object permissions with inheritable permissions from this object", so those changes get applied to the existing files and sub-folders.

* Are you running Win10? Did you get the "Fall Creator's Update" (FCU aka "RedStone 3")? Do you have "New Vegas Stutter Remover" (NVSR) installed? If all three are "true", then please see the 'Issue: Recent (post-Win10 FCU) CTDs after 10-20 minutes of play' (and other "heap size") entries in the 'Solutions to Performance problems' section in the wiki "Fallout NV Mod Conflict Troubleshooting" guide.

The FCU update was released in mid-November 2017, so a "brand new" system probably did not come with it installed. However, the default configuration is usually to have OS updates automatically installed. (Those usually start being distributed on the second Tuesday of each month, but may take a week or more to get to everyone.) See the MS "Get the Windows 10 Fall Creators Update" article for how to check your version release and manually pull down the update if necessary. It is important to keep your OS always "up to date" to prevent malware infections.

* If you are suddenly having a "slowdown" or lag; or a lack of sound; or problems getting NVSE to load, or really anything new unexpectedly, please see the 'Issue: NVSE - fails to load after update KB4058043 to Win10 FCU (v1709)' entry in the wiki "Fallout NV Mod Conflict Troubleshooting" guide. This may be due to a Windows Update for the "Meltdown and Spectre Vulnerabilities".

* Are you using the 4GB Patcher? If not, please see the 'Maximizing use of memory' section of the wiki "FNV General Mod Use Advice" article.

* If you are using the full 4GB of memory, most likely your CTD problem (now or in the future) is the default "heap size" is too small. It's so common you might as well deal with it now. Please see the 'Solutions to "Crash To Desktop" (CTD) problems' section in the wiki "Fallout NV Mod Conflict Troubleshooting" guide.

* Move any "inactive" plugins out of the game "Data" folder. They count against the "plugin cap" because they get loaded by the game engine if found, and can cause "Missing Master" problems. Please see the wiki "Missing Masters" article if you get that error message.

* "Compatibility patches" to make one mod work with another need to be placed after (as in "physically lower, higher numbered") in the "load order" than both of the plugins they are designed to make compatible. ESMs should always be placed at the top (lowest numbered) positions in the "load order", followed by the related ESPs though they can be separated from their ESMs by other plugins. "LOOT" does a good job of determining those basic orders. Getting the "load order" incorrect will cause "Missing Master" errors as well.

* Don't install compatibility patches for mods you do not have installed/active (e.g. get rid of any "TTW" patches if you aren't running TTW).

* Don't install every optional file for a mod. Read the install instructions carefully. Optional files need to be selected on a "case by case" basis. For example: with any mod you usually only need one ESP (and possibly one ESM) "base" file depending upon whether you have all the DLCs active or not. Only if you don't have them all active do you need to install any specific DLC versions if there is an "Ultimate Edition/All/Merged DLC" version.

* Do not use an "Auto-purge" mod for game play. (That was old advice from before we knew better.) They are designed for debugging by mod creator's only, according to the author of the JIP extensions to NVSE. See the 'Issue: CTD without warning, "Out of Memory error", or stops responding after the Main Menu', "Cause-2", "Solution-3" entry in the wiki "Fallout NV Mod Conflict Troubleshooting" guide for the game settings that do the same job.

* Please see the paragraph about "auto-saves" under the 'Essentials for Getting Started' section of the wiki "FNV General Mod Use Advice" article. If you have been using the built-in "auto-save" feature and you get the endless "roulette wheel" when loading a save game, then your current save game file is corrupted and you will have to either go back to a save before the corruption occurred (hard to tell) or start over.

* "Texture packs" don't usually show up in the "load order". (They are replacing vanilla assets; thus they overwrite existing files.) And the issue with them is what size/resolution of the images you are using. Larger/"hi-rez" textures require more pixels, and larger screen display monitors multiply that requirement in a non-linear way. While your hardware may technically be able to handle it, the game was published in late 2010, designed for Windows Vista with maximum screen displays of 1920x1080, with default image sizes of 512x512 pixels. The game engine texture cache tends to be the bottleneck: "leaking memory" and causing "stutter".

-Dubious-

[NightmareRex]

if steam updates the EXE and 4gb patch nolonger updated and therefore fails the check system you can just use this, it has no check, you can use it on GECK.exe too which is an advantage, you can use it on any game thats 2gb. http://ntcore.com/4gb_patch.php

[dubiousintent]

While that tool is indeed useful, we learned early on that it doesn't quite work with FNV, because of the integrated Steam checks. That's why the FNV 4GB Patcher (and it's predecessor) became necessary. Just reapply that patcher if needed. It also can be applied to the GECK.

 

I don't want to appear to be unappreciative of your enthusiasm and attempts to help the community. But this is an older game, and the community has built up a lot of knowledge about the common issues. We are attempting to avoid well-meaning but less current advice confusing the picture. You might want to take a look at the wiki: in particular the "FNV General Mod Use Advice" and "Fallout NV Mod Conflict Troubleshooting" guide articles. Anything you care to contribute to gaps in that knowledge will be useful.

 

-Dubious-