vipermkii Posted June 26, 2012 Share Posted June 26, 2012 (edited) Hi!! So I decided to do this and I discovered that the ring was on the main mesh but was missing from the 1st person mesh. So I copied the branch from the main mesh and pasted branch in the 1st person mesh under the main node. I had to adjust the x and y values a little, it shows up in game and here is the problem, it stays attached to the axe when its drawn from the sheathed position. here is a link to the turtorial that I used: http://cs.elderscrolls.com/index.php/Making_New_Armor_Using_NifSkope Can anyone tell me how to fix this? Edited June 26, 2012 by vipermkii Link to comment Share on other sites More sharing options...
Moraelin Posted June 26, 2012 Share Posted June 26, 2012 Basically it must be under the "scb" node to stay at the hip. You can make a new nod as a parent for the scabard, and it will be the one called "scb", and then put the ring node and whatever else you need under that too. That's how I made composite scabards like the daisho, Link to comment Share on other sites More sharing options...
vipermkii Posted June 26, 2012 Author Share Posted June 26, 2012 (edited) Basically it must be under the "scb" node to stay at the hip. You can make a new nod as a parent for the scabard, and it will be the one called "scb", and then put the ring node and whatever else you need under that too. That's how I made composite scabards like the daisho, Thanks, that fixed it. Edited June 26, 2012 by vipermkii Link to comment Share on other sites More sharing options...
Recommended Posts