ramilow

I have GOTY english version of Fallout 3. There's no problem like with New Vegas, where is a separate version for Eastern Europe :D Ok, if I will have time, I will check. As for some mods, I am sure that they're not guilty, then I will check with each subsequent one until I find the "culprit". I don't remember if other people reported similar situations, I will search.

I have already accepted that I will lose dozens of hours of gameplay. "Shame" that the problem with crashes did not appear earlier, I would not have any regrets about saves;) I reinstalled game, start a clean game. That's no problem. So I reinstalled mods. Unfortunately, the problem comes back at the beginning on save in Vault 101. When I had this problem before, it most often concerned NPC mods that ended in .esp. I changed esp to esm in FO3Edit and it solved the problem. Most mods have been known and proven for years, but I have no idea how to identify the "culprit". Earlier it was enough to remove the problematic mod and there was no problem with doing save. I am still wondering what's going on with this "invisible border" through which the attempt to save the game does crash. I understand that I can reinstall the game again, but for nothing I can indicate which mod causes the problem with saving the game in location like Tenpeny Tower, Car Dealership (next to Fairfax Ruins) and Willy's glocer (next to Tenpenny Tower). I think that even if I reinstall the game, run "clean" game and then install mods, the problem with crash will come back anyway.

My specifications - Win 10 64-bit, i5-8250U, 8 GB RAM, AMD 530. I uninstalled the game and I will stick to the instructions. Then I'll see if we can also recover saves. I will take care of the reinstallation, 15h of installation is some time, and it is important for each of us ;)

For Fallout 4, the problem was with the Sim Settlements mod. After the upgrade, there was no problem. Actually, Fallout 4 and Skyrim are the least emergency games on my equipment (and Skyrim is heavily modified - but no crash). I admit, with F3 since I have a game on the new game I have the most problems with stability. I'm not master of english, but I try to understand as simply as possible: - uinstall game and all mods files (but just leaving save) - install clean game - install mods wih FOMM (I understand that Nexus is unreliable in this case?). I want to find a solution that can be useful in the future and for others. It still hurts so much that I once struggled with this problem with crash afer saving on F3 when I had an old laptop, but I forgot how I fixed it.

I'm using Nexus Mod Manager and I'm not smiling reinstalling everything. I know this is a trivial question, but is there a simpler way? E.g. Do any of the mods cause that f.e. in Megaton and Tenpenny Tower making a save will crash I think, it's invisible, after which each attempt to save the game causes a crash. I used to have this problem and I solved it. But stupid to admit, I forgot how. :confused: Unless the above is the only way, so I'll try ...

Yes, unless according to the instructions it should be in the main folder of the game. I had a problem most often with mods for npc. The solution was to change the files from .esp to .esm in FO3Edit. But now I don't know which mod can cause the problem, because what I had to change was changed.

I tried reinstall all mods (I checked the files, I cleaned with fo3Edit) an I found problem with Megaton - crash after saving near the location, like wth Tenpenny Tower. I don't know what to do about it. I had this problem on my old laptop a few years ago, but I don't remember how I solved it.

I tried to change the order of loading. Better? Should I change anything else?

In the sense all plugs as one? I don't really understand how it should look right?

I didn't know Fallout 3 would surprise me. After reaching some locations, the game crashes when I try to save. I currently have this problem near the Tennpeny Tower and underground Warrington Station. The worst thing is that it's difficult to capture the moment when saving works and when it doesn't. This is the "invisible line". I checked local files and cleaned with Fo3Edit. I thought some NPC mods were a problem, so I changed the .esp files to .esm in Fo3Edit. I removed some mods and it seemed to work correctly. But then the problem comes back and I don't know why. There is always some "invisible line", or a problem occurs after starting the game (when the saving location works, but after restarting the game don't). Any suggestions? List:

Hi, sometimes I have problem with freezing my game when i try make save or exit to deskop. Game is freeze and I must restart compuer.This occurs in various locations and in specific situations. For example: - in Vault 88 when radscorpions come out from under the earth. After this i can't saving game or normal exit to deskop. In this situation I don't make a saves. - In south locations Far Harbour (f.e.Fringe Cove Docks, Broke Head Lighthouse, I don't know where is start problem with saving). - After make quest on DiMa's memory. It looks like a problem with a script that corrupts the possibility of a normal save a game. Either it can not be used at all and there is freeze on any attempt to save the game, or freeze is only when trying to get to the deskop.

You're using Sim Settlement. The first question is, what computer specification do you have? I had a problem with loading textures in built settlements, so maybe you are experiencing this problem with Sanctuary. Before moving on the Sanctuary, wait a while, preferably looking at the ground and walk slowly to the settlement. If the game doesn't crash, think about changing the graphic settings.

Maybe I managed to solve the problem, but I don't know if it's the final solution. I use mod for unlimitted companions, so I've sent everyone apart from Nick. When I have only one companion, I can go to Far Harbor and don't crash when loading this location. For luck i made a save file. I tried this method on old save before heading to Far Harbor, but in this moment still now crash.

Modding is so beautiful. When you solve a problem with one game, a problem occurs in the next game ;) So, the case is "simple". After starting quest and speech wth Nakano family I'm trying go to Far Harbor, but when is loading screen, game make crash. It looks like I can't load DLC. I tried to check the consistency of files. I tried with delete folder "Architecture" in Data folder, but that didn't help. I didn't try to uninstall all the mods and look for the "culprit" (except for a Sanctuary and Far Harbor related modes, but that didn't help) because I don't know if there were any other problems. My list of mods:

Whoever has now a problem with start a game with F4SE, he knows why Bethesda is an XDDDD problem

Do You have FNIS mod? Maybe some mod is incompatible, but you need a list of mods.

Bethesda probably doesn't like the Fallout series. Just compare how extensive Oblivion is and what was Fallout 3. Do you remember how many quests Oblivion had, and how much F3? In F3 without DLC, there are as many quests as for DLC in ... Oblivion;) It's a shame to write about plots. So next, Skyrim and Fallout 4. Skyrim is older, right, but he gives more quests than F4. In addition, F4 is more schematic for me. Although the creators drew from New Vegas and mod patterns (plagiarism of Autumn Leaves in Far Harbor), I felt that the game is more poor. Just Bethesda has no idea for the Fallout series. He can make a big game world (but more poor than the Elder Scrolls series), but he has a problem with quests. I wonder how the new Obsidian game will come out, I'm counting on the knockout: D

I checked this, and reinstall game and mods. So what fascinated, problem with grey screen is when I created in fallout.ini line inumhwthreads=2. Now 4GB start is OK, and I have my saves. But I don't understand, what is problem with make a change in fallout.ini

I installed NVSR, that's always. I'm modifing NV from 2-3 years. Earlier I had old laptop from 2010 with Nvidia 310m. Now I have a little better equipment and I have practically the same mods as before + a few more. On an old laptop I never had this problem with saves and turning on the 4GB shortcut (like in instruction). NVSE loader didn't work, because enplczru: P Now I've problem with start game and saves, but I don't know where it's going. I just play one day and all it's ok, but the next day last saved doesn't work. Chance to act have the saves which are older, but they have more often chance to crash and freez, there is no problem with the new game (but only for a few hours, progress in the game - a chance that the save will stop working). The only change, now I'm playing on english version. On old laptop I had a Polish language version and I didn't have this problem with saves. I don't know if this is a tip - if Steam make start game without NVSE because f.e. I'm offline, that's reverse changes in fallout.ini from bLoadFaceGenHeadEGTFiles from 1 to 0, bUseThreadedAI from 1 to 0, and eliminated line inumhwthreads = 2.

"You should be using only one of the Mojave Radio Extended .esp. Not all of them. The same is true for Mysterious Broadcast." - I did it and that's same with Nevada Skies. So, I reinstalled NVSE and I'm wondering how to fix the game launch and my saves. And why the problem appears after a few hours of the game?

After few hours game I had problems with load my saves (f.e. grey screen and no sound). I tried consistency of game files, so that's problem with start game on NVSE with communicate "Application load error 0000065432". I reinstalled game from english version to polish and again to english (I prefer game in english version, I'm annoyed by the subtitles together in polish and english :laugh: ). But then I don't start game on NVSE. I installed 4GB mod, made a shortcut and added a line -SteamAppId 22490. I can started new game, but old saves don't work. Unfortunatelly, afiter few hours new game, I had again situation with grey screen. I made a mistake with again consistency of game files on Steam, so after click 4GB shortcut I saw info on "the specified file can not be found". Again, I have a situation that my saves don't work, and I don't want to start again. I do not know how to solve this problem. I tried to reinstall the game. I'm afraid that after a few hours saves will not work. Maybe solution this problem can help to people with ENPLCZRU version, because someone hated Eastern Europe and ctreated version for this region. My list of plugins:

"With a GF310M GPU, it's a small miracle you've ever been able to play Skyrim at all." - hahaha, no. Skyrim without mods works without a problem. As well as F3 and NV. Exchange further? You see, I don't believe in miracles and nothing is shocking. "Harsh, maybe, but it is what it is" - no, it's just malicious. Couldn't you just write "This is a graphics card problem"? So, I'm asking again - is it possible to increase the FPS anyway? I changed the resolution to 1280x720 and it is a bit better (more often I have over 30FPS), but I still have frequent drops to 15 FPS and lag. Is it possible to do something to increase the amount of FPS to, e.g. 20?

As I have been modifying Skyrim for a long time, for some time I have annoying drops of FPS and lags, especially when I was doing a mouse turn during the game. I pushed some of the mods, which I didn't rlly need, but I couldn't get back to the previous liquidity. I have antialasing and filtering turned off. The quality of details was low, apart from the texture quality (medium). Something touched me, as checking it turned out that FPS oscillating between 10-15 I have even low quality graphics (something must be wrong). With the installed mods improving the quality I use almost from the beginning of Crash Fixes (Without this after modifying the game dumped, and has been running smoothly for so long). I also used Skyrim Project Optimization, but there was almost no improvement here, because I had 10-15 FPS in cities. Sometimes in smaller locations, e.g. a player's home I had a jump to over 30 (wow, it will be so smooth?) Recently I installed the HIALGOBOOST UPGRADE GPU, which showed me the amount of FPS and so I noticed the problem here that I do not have enough. Not only that, on average, it is 14 FPS, but with some movements the camera drops to one frame per second for a few seconds. This mod supposedly improved the situation, but only a few frames. I wonder if it's the fault of mods or maybe hardware (the computer sometimes lags when using the browser, or when after an hour of playing I will return to the desktop). I enclose a list of modes: I've reinstalled the mods. I was also thinking about reinstalling the game itself, but I'm afraid that it might be wasted hours of re-downloading my steam version (the game is also automatically updated). As for my equipment, this Intel® Core ™ i3 CPU 2.13 GHz processor 4 GB RAM, 64-bit system Nvidia GeForce 310m (uptade with 341.95). I don't know if I have provided all the relevant data, but I hope that this will help solve the problem, maybe there is a solution?

I still do not know how to solve this normally, but I found a stupid and simple way. On the way to Morvunskaar I had to wait until the elements of the fortress were loaded. Thanks to that I didn't have a crash and I could finish the quest. This is the only solution where I've found.

Hi, I've got a problem. When I'm going to Morvunskat (quest "A night to remember") my game is crashed. I tried old saves, TES5Edit, reinstalling mods and set the best performance. I've no idea, what's problem. Crash is only when I start the quest "A night to remember". I'm thinking about reinstalling it, but it's been with my internet for a long time. I also had situations where I combined unnecessarily, because the solution was quick and easy. Is there any solution to the problem? Before the CTD I see that in Morvunskar there is not a wooden tower, maybe something with textures, but I don't know why this problem is. My list: