RodrigoDRT

It worked indeed, loaded the game and it already came along with texts. For my surprise it worked! I could enter any interior and just to go aggressive I added several follower mods for the same interior, I mean, there was a crowd of followers inside drunken huntsman and it. didn't crashed. Such a relief, I though I had ruined my game. Maybe I'll even try the graphic enhancing version, but first I'll test the overall stability. Now one last thing, since I have a 4gb of video memory I've set the value in the INI file to 3700 and the reserved memory value to 512. Since I have 16gb of ram, would it be interesting to raise to 1024?

Well uhm... I think i've got the ENBoost installation sorted according to this guide: http://wiki.step-project.com/ENBoost#Recommendations I guess its all in place, but i dont know how to use it, when i try to open the enbhost.exe it says it would work automatically when running the mod, frankly I'm not sure how to use only this enboost...

well, i never touched ENB so i'm quite sure i dont have na ENBlocal.ini Guess i'll have to learn about it first.

As the titles says, I'm having freezes or CTD's upon loading interiors with follower mods, I do not have too many follower mods for this second run, previously I've ran with ridiculous amount of followers and never really had this kind of problem. Main issue right now is loading places like the Drunken Huntsman or Temple of Kynareth, and before that, I couldn't even enter Whiterun because I had a follower mod that had a follower in the general area, so it would immediately freeze upon attempting to enter Whiterun or have the área around be very lag-ish and sturreting, the moment I got close to the NPC, a full freeze. If I load some follower mods while inside, say, Drunken Huntsman (that I can only do when I disable every follower mod, I can enter it without much problems then), and enable everything, upon loading my game all the followers are there, I used 6 mods that added 7 followers in the same place for testing and no problem upon loading the game. Once I get outside and try to get in again, however,, crash or freeze. I really just have 4-5 follower mods, some just add one or two npc to each interior, even so, I crash or freeze attempting to enter any of these. I'm sorry for the quite long LO (spoiler bellow), I'd appreciate any help. So far I tried to re arrange, use Loot for sorting, I cleaned all the DLC's Update/Dawnguard/Heartfires/Dragonborn, I tried diferente follower mods that would add NPC's to the same locations, resulting in the same freeze or CTD, disabled any follower managing mods, also tried safetyloading plug in with no avail... I'm out of ideas... My specs: I7 4770K 16GB RAM GTX980 1TB SSD Win 10 64 bit NMM for arranging mods, Bash for bashed patch. Latest SKSE Load Order: ​

Thats pretty much it, I have Breezehome Fully Upgradable mod, quite sure its installed at its supposed to... I've only purchased the upgrades from Proventus so far (vanilla), havent touched the mod's ones. Well long story short, i've got thing, and theres only the option to replace the study with childs bedroom atm, and it simply doesnt work. I wanted to see what it does, but when i purchase it Proventus says it will be there next time you visit, but nor he takes any gold, or anything changes, and the option to replace the study is still there. Anyone using this mod could give me a hand with this? maybe im doing something wrong?

Ok, thank you, I'll just revert everything, enable the .esp's and hope for the best.

Still need help with this, anyone? if you use this mod, please, how are you loading it?

Thus meaning i should ignore that part and leave my texture packs active, and .ini files unchanged?

Please someone clarify this for me... Better Males mod requires that we disable the official HighResTexturePack01, HighResTexturePack02 and alter 02 .ini files, wich I did. The HighResTexturePack03, I left active on wrye bash, however, this makes my Unofficial High Resolution Patch mod gets disabled automatically as it seems to require all 3 Textures packs esp's to be active. I dont know how I'm supposed to use this.. someone please help me sort this out. I don't want to run the game w/o the unofficial patch active cause i've been playing with it on since the beginning.

Guys please help me with this , its driving me nuts... I've just purchased breezehome and when inside, i noticed theres a yellow-ish light blinking with a 1 second interval next to the table, it mostly only reflect on dropped objects, static meshes does not reflect, its goes tru the second floor too, its annoying as hell.... now in my load order i could only think of Enhanced Lights and FX mod interiors module that could be doing this, i disabled it and the interior lightning changed back to the vanilla but the blinking light is still there, ive tried to disable some other mods but my save would CTD. Please take a look at my loard order if possible, i appreciate any help with this. *EDIT: My unofficial high resolution patch gets disabled automatically because I'm using better males mod, the mod description says you have to disable HD texture packs 1 and 2, and this disabled the unnoficial patch too automatically.... may be related? Skyrim.esm=1 Update.esm=1 Unofficial Skyrim Patch.esp=1 Dawnguard.esm=1 Unofficial Dawnguard Patch.esp=1 HearthFires.esm=1 Unofficial Hearthfire Patch.esp=1 Dragonborn.esm=1 Unofficial Dragonborn Patch.esp=1 Falskaar.esm=1 ApachiiHair.esm=1 ClimatesOfTamriel.esm=1 JSwords.esm=1 HighResTexturePack01.esp=0 HighResTexturePack02.esp=0 HighResTexturePack03.esp=1 Unofficial High Resolution Patch.esp=0 AmazingFollowerTweaks.esp=1 Improved Combat Sounds v2.2.esp=1 High Level Enemies.esp=1 High Level Enemies - Falskaar.esp=1 High Level Enemies - Dawnguard.esp=1 High Level Enemies - Dragonborn.esp=1 High Level Enemies - Increased Max Resists.esp=1 High Level Enemies - Raised Ability Caps.esp=1 RaceMenu.esp=1 RaceMenuPlugin.esp=0 JSwordsDistributionBalancePlugin.esp=1 JSwords_Load_Screens.esp=1 Cloaks.esp=1 Cloaks - Dawnguard.esp=1 1nivWICCloaks.esp=1 1nivWICSkyCloaksPatch.esp=1 Hothtrooper44_Armor_Ecksstra.esp=1 Hothtrooper44_ArmorCompilation.esp=1 Immersive Weapons.esp=1 TrissArmorRetextured.esp=1 Field Mage Outfit.esp=1 Guild Duelist Armor.esp=1 DK_Armor_By_Hothtrooper44.esp=1 Sotteta Necromancer Outfit.esp=1 Real Clouds.esp=1 EnhancedLightsandFX.esp=1 ELFXEnhancer.esp=1 ELFX - Exteriors.esp=1 ELFX - Dawnguard.esp=1 ELFX - Dragonborn.esp=1 SMIM-Merged-All.esp=1 Skyrim Flora Overhaul.esp=1 SFO - Dragonborn.esp=1 SFO - Expanded Diversity.esp=1 ClimatesOfTamriel-Nights-Level-3.esp=1 Supreme Storms - Cot Version.esp=1 Poet.esp=1 Chaconne.esp=1 BTRH_Tomoe.esp=1 BTRH_PSv02.esp=1 BTRH_Elly.esp=1 FollowerCiceria.esp=1 YuiH StandAlone Follower - Merura.esp=1 Elwyn - YuiH StandAlone Follower.esp=1 Sara.esp=1 Hikari.esp=1 FollowerSha.esp=1 SofiaFollower.esp=1 Chesko_Frostfall.esp=1 WetandCold.esp=1 WetandCold - Ashes.esp=1 WATER.esp=1 WATER DG + DB.esp=1 WATER Plants.esp=1 WATER Falskaar.esp=1 iNeed.esp=1 Equipping Overhaul.esp=1 Apocalypse - The Spell Package.esp=1 Apocalypse - More Apocalypse.esp=1 SkyUI.esp=1 Bashed Patch, 0.esp=1

Not really any issues with game, altough I'm having some orange checkbox mods on bash that need some sorting. Neverthless, about leveled lists and bashed patch. as an example im using cloaks of skyrim, immersive armors and weapons, and winter is coming cloaks, as for WIC, i know theres a compatibility patch to work along with cloaks mod, though, can I use a bashed patch to get the leveled lists to go along instead? In fact, its safe to always safe/recommended/needed to use a bashed patch for the leveled lists with all the mods that modifies them, although for example, one just add a new sword to the list, while other adds shields, do they conflict or only if they try to add the same kind of item to the lists? I'm sorry im new around and im confused how to get multiple mods that add new stuff to the leveled lists along w/o messing things up or never have some items to appear too. ty in advance.

I guess I understand, thanks for the replies so far. I'm certain i'll have a lot of trouble with the load order and mods conflicting, but probably a lot of fun once i get all of those working, but at first i just wanted to know what i needed to actually install a mod. Neverthless, i've got that (hopefully) sorted thanks to the guide i've been linked into, and if its not really much to ask, other than the unofficial patch mods, any *must* mod I should have for a fresh start gameplay?

Ty, im already getting LOOT and Bash, also, I noticed that nexus mod manager on top of nexus main page, do I need that as well?

New here and... I know this may not be the most aproppriate moment to ask for help with this cause everybody seems a bit busy with all the paid mods stuff and all, but uhm... I had skyrim for a while and never modded it, and now i decided to so while they are still mostly free... Anywhere I can find a beginners guide on what I essentially need to install mods? Thanks in advance.