DeltaAgent26

!!!!SOLVED!!!! I've tried several times to start a new game. 3x with just a new character, and 2x with a fresh game installation, and I am still getting the same issue. It happens at (least for me), in the Bleakfalls Barrow. I get past the guy with the claw that is stuck in the web, I kill him, and loot the claw from his corpse, but then when i get to the first few Draugr, I fight and kill them, but I can't loot their bodies. Any Ideas or suggestions would be appreciated. Thank you.

update: reinstalling the game doesn't work either. Just tried a new character on a new installation of the game, and same issue. will let you know if I come up with anything useful.

this is a new issue since the V1.9 live release. I have run into it several times as well. It's especially frustrating when you cannot interact with the NPC, or corpse of the NPC that either continues the quest or ends it. I have started from the beginning of the game 3 times in the past 24 hours. Each time with a new Character. And each time that I get into Bleakfalls Barrow. I can't loot any of the Draugr that I have faught and killed. So I can't even continue the main storyline. I have even tried reinstalling the game, that didn't work.

bump

I just had the same issue going into bleakfalls barrow. Fortunately I had just started a new character. The things I said to try didn't work for me. I am guessing that it is due to the new version release. I am currently re-installing Skyrim. I was not able to loot the draugr that had the dragonstone tablet, but was able to loot everything else. You may want to make backups of your saves, then try reinstalling the game.

ah, that would 'splain my issues with that then, thank you for the info.

it's something that I noticed as well, soon after v1.9 went live.

check your skyrimperfs.ini file in your documents folder, look under [image space] and see if : bDoDepthOfField=1 If it is set to 1, then change it to 0 save and enjoy.

wanna switch problems? lol i can't get my kill moves to stop working. :) you said that you used tes5edit.... did you clean in this order: 1.) loading Skyrim + Update, but only highlighting update? 2.) loading Skyrim + Update + Dawnguard, only highlighting Dawnquard? 3.) loading Skyrim + Update + Hearthfires, only highlighting Hearthfires? 4.) loading skyrim + Update + Dragonborn, only highlighting Dragonborn? the game was just recently patched to the live version of 1.9 so you may need to re-clean. if you have b.o.s.s. installed rerun and check for messages and clean if needed. you WILL need to clean again if you verify game cache.

Possible solution: Evert time Skyrim is started, Enter Console Type: set killmove to 0 hit enter exit console I have been playing Skyrim A LOT lately(150+ hrs the last 2 weeks alone), and have several level 81+ characters that I am doing more run throughs with since the dragonborn DLC released. My issue is that now with high skilled, high perked characters, I am getting the kill-move cut-scenes almost every time I kill something. Here are my questions: Is it possible to completely turn off the kill-moves and/or cut-scenes without adding a mod? ... if so, how? Can it be done through the use of the console commands? ... If so, how? Any help or suggestions would be appreciated. Thank you.

Have you tried going to a different location, waiting for 3, 7, or 31 days (in-game), and then returning? If that doesn't work, go into the console commands by hitting your "~" tilde key, and with the cursor clicking on the door in question, (you should get hex code in the top center of your console) then type "unlock" (no quotes) hit enter the hit the tilde key again, and you should be able to open the door.

First, here is my rig set up: MOBO:Asus M5A97 R2.0 CPU : AMD Black Edition FX 8350 8-core @ 4GHz RAM: 16GB Corsair XMS3 Dual Channel @1600MHz C11 HDD: 3x Seagate Barracuda 1TB Sata2 3.0GB/s 1x WD Caviar Green 2TB Sata3 6.0GB/s Video: Dual GTX 460 (non-SLI) with dedicated PhysX Monitor: 40 inch Magnavox LCD 1920x1080p @ 60Hz (upgrading to dual Asus HD 7770s and adding another 16GB ram) I also use MSI Afterburner, and there is a setting in the control panel for what you are talking about that enables data filtering. "Simultaneous access to the same hardware sensor by multiple software products may result in sensor misreading resulting in seeing spontaneous abnormally low or abnormally high spikes on the graphs. Enabling this option allows processing the data with special math filtering algorithm rejecting such spikes...." Make sure this option is checked in the monitoring tab. It may resolve your issue. Also Skyrim was not created to run on SLI or Crossfire Enabled systems. So when running Skyrim, be sure to disable crossfire. And try adding the +fullproc command to the skyrim launch options (in Steam), it should help with core affinity, and system resource usage. If the +fullproc command doesn't work for you, launch the game, and alt+tab out of the game, to the desktop and launch the task manger. Go to the processes tab, and find skyrim.exe , rt-click on it, and set affinity, and priorty from there.

Alright. Thank you. Oh, and by-the-way. that particular DL went to an off-site url to be able to DL it.. thought it was odd... still going to do a full cleaning of my system, just to be safe. :devil:

My Computer started acting "wierd" a couple of days ago. I thought maybe it was hardware issues. However, today when I ran Malwarebytes anti-malware, it found "PUP.Hacktool.Patcher" in one of the files I downloaded from skyrim nexus. The file is: Skyrim Universal 4GB Memory Patch-3211-1-0\Skyrim_Memory_4gb_Patch\Skyrim.Memory.(4gb).Patch.exe the uploader is argie84 Below, i have attached a text file of the log crated by the Malwarebytes anti-malware.

Here is the url for that video.

I am starting from absolute scratch. Reformatting all of my HDDs, re-installing OS, and going from there.

I have completely removed, skyrim, steam, and all associated files, reg entries, etc. amd going to wipe my game drive, and start from scratch. thanks. :)

Tried the Ctrl + F4, and nothing happened. Tried on object window with character selected and in render window with characterselected, and did not get a facegen pop-up. Also still received the ....cpp file error.

Thank you. I'll give that a try and post with results.

Go to your skyrim install folder, and add dawnguard.bsa to the list of archives in the skyrimeditor.ini file. there is a video tutorial for it on youtube.

I have been creating a personal mod, and have created several merchants, and have altered several of the housecarls, and their faces are all grey.<br><br>when loading the characters in the CK I get pop-up messages saying that "...textures\actors\character\female\femalebody.dds" \femalebody_msn.dds" \femalebody_s.dds" are missing. However, when running the game, the bodies appear as they are supposed to. I am assuming that this is due to the mods being loaded<br>in the game, but not in CK. So the bodies are fine. But when I try to preview the characters I get an error message that states... "C:\_Skyrim\code\TESV\BSShader\BSLightingShaderProperty.cpp" line 806 And I am wondering how to replace or re-install this particular file. Also I have checked and double checked the texture files, and they appear to be there, xxxhead.dds, xxxxhead_msn.dds, and xxxhead_s.dds</div><div>are in the texture folder / sub-folder(s) but the faces are still grey in game. Any suggestions?