jasmerd

so - i have been out of skyrim for a long time now - so many changes!!! i would really like to install a fun enb and some cool graphics mods to go with my system.. just a quad [email protected] 8gb ram with a nvidia gtx970.. decent but not overly fantastic.. plz any of you pros out there that can suggest a good enb combo with some graphics mods i would really like to jump into setting it up again!! thx ahead of time for your suggestions :)

Ok - searched the net a bit and found a few suggestions - none of which offered a "real" solution. Farkas keeps following me and interrupts anything I try to do by initiating the same conversation with me over and and over. I have tried to kill him via console however he is essential and will not die. I did try to make him "mortal" but he still does not die. Killing him is supposed to reset his A.I. after you resurrect him but this does not work. For now he is bleeding out and cannot follow me - but this is not a valid fix. Any fixes out there?? AAHHH!! thx :smile: edit: still looking for a solution to this..

I have not been able to enter hob's fall cave without ctd for awhile and the jarl of winterhold has given me this quest: Find Helm Of Winterhold Inside Hobs Fall Cave is there a set stage command for this to be complete? tyty -jaz *edit one 3/12/13: still looking for the quest name and set stage command to complete this quest :) t y!!!

I found a version on file planet that works - no need for 5.1.1

I had an older version of deadly dragons installed that did not require dawnguard DLC. I upgraded to 6.3.5 and found out after installing it that it requires dawnguard... SO I need a copy of deadly dragons v 5.1.1 currently my game ctd's before I even get to the load game option..

I know the release dates of both - and which came first of course - but not having purchased either yet - I would like to know which one would you purchase if you had the option to purchase one or the other first? Also - I install quite a few mods and am going to experiment with wyrebash on the next install so I expect to screw up and have to do some re-installs. Will I have to download the DLC each time for each new install? thx :)

while the above error looks cleaned up from the patch there is one more critter failing on it's 3d stack for me that actually gets stuck in an endless loop *********** Start papyrus ************************************ [03/03/2013 - 04:24:33PM] Error: Unable to call Is3DLoaded - no native object bound to the script object, or object is of incorrect type stack: [None].Firefly.Is3DLoaded() - "<native>" Line ? [None].Firefly.OnStart() - "FireFly.psc" Line 68 [None].Firefly.OnUpdate() - "Critter.psc" Line 270 [03/03/2013 - 04:24:33PM] warning: Assigning None to a non-object variable named "::temp4" stack: [None].Firefly.OnStart() - "FireFly.psc" Line 68 [None].Firefly.OnUpdate() - "Critter.psc" Line 270 ************************ End Papyrus ********************** before the patch: I would see this 20 times per second every second while exploring exterior cells. The error also occurs through load doors.. so it becomes embeded into my save. Only resort is to loading a previous game without the error. after the patch: 4-7 times the error followed by the warning occurs every second once present while roaming open world..

@raztafarian looked at your papyrus errors and didn't see anything familiar - however if this were me or i were you with that situation - papyrus errosr I don't worry about TOO much but if they are repeating non stop every second then yeah - i might go backwards to a save where that is not happening and start troubleshooting from there. I always a try coming off of a fresh reboot once skryim hangs or times out - or I try getting into the save I want by loading a previous save - Once I am in game try loading the game I want. If THAT works - I will move to a low traffic interior and save game there. Then I exit, reboot and try to load that new save game. Hopefully you are good to go. Atleast for the time being LOL still need to trouble shoot the errors start up sequence for me: start game booster - utility frees up memory by stopping uneeded services and programs ( download link below ) start NMM launch through skse exit NMM (frees memory) I prefer and older version of gamebooster - Game booster 3.4 - download link: http://www.techspot.com/downloads.php?action=download_now&id=4842&evp=48f85d3c77f1ff93d2ef107f949e60eb&file=1 If I am still having problems after that I will look at using Boss boss/load 1. start boss and export my load order to a text file 2. run boss and let it sort a new load order 3. I note any mods up for tesV cleaning and I clean where necessary 4. I do the stare and compare with my new load order with respect to my saved load order from step 1. I pay attention to differences - wether I get anything out of it or not I atleast become familiar with dependencies and boss's thinking. Boss has actually put an esm in the wrong order for me on multiple occasions with the same mod - this resulted in a ctd. claralux's esm for example boss for me will put it infront of climates of tamriel esm - that equls CTD one of the practices I am trying to follow more is before I install a mod: read the mod description look for installation guides, and uninstallation guides - if they are not there, I download the file manually to a folder. extract that mod and look for a read me and see what it has to say about installs and uninstalls. If I dont' like what see I don't bother with the mod. however if it's all good for me then i wil do: 1. go to the console - type: save "b4 modname" 2. exit install the mod 3. set my load order properly according to readme.txt/mod info 3. start game 4. go to console 5. save "Aftr modname" this gives me some play time with the new mod and I can follow my papyrus closely right after the new install of the mod if it papyrus gets all jacked up - I FOLLOW the author's uninstall guide - if available if it isn't - I just use nmm and hope for the best - look around for esp's / bsas it may have left lying around / check load order make sure it is gone. then go back to my save game "b4 modname" edit1: saved game "b4 modname" was created in step 1

*edit - lore friendly too :)

Looking for a small/medium sized player house with all crafting stations and auto sorting associated storage bins for each station. Something along the lines of the "Cascade House" mod but in a different location, preferably cold climate. ty!!! jaz

yeah - that's awesome. I hope it is something that can be fixed in a current game and not require us who are getting it to reload. I have read quite a bit on other forums and found that it is a PEX file that is located in the skyrim misc - bsa the psc file comes with the creation kit download.. thanks for your reply gruft

since nobody has a solution for this error - nor have i been able to get an uninstall procedure for the only insect mod I have on my mod list - I was considering reinstalling - papyrus logs will grow bigger the longer i run a single session of skyrim the larger the papyrus log gets, it repeats this error and others associated with insects non stop. One or two is ok - but 25mb error logs is stupid NOTE: the only mod i am using affecting insects is 83willows 101 HD bugs mod - which will not be included on the next install just to see if the damn critter.psc errors go away. ******************************************************************************************************************* 2/23/2013 - 01:02:55AM] Error: Cannot check if the reference has a named node because it has no 3D stack: [ (FF002CFF)].ObjectReference.HasNode() - "<native>" Line ? [ (FF00148C)].critterMoth.GoToNewPlant() - "critterMoth.psc" Line 272 [ (FF00148C)].critterMoth.OnUpdate() - "critterMoth.psc" Line 138 ******************************************************************************************************************* seems like I am always having to reinstall because of bugs - >.< and this time it really is about bugs!

some reason this posted 2 times ><

i have the same error but no DLC. Also have the same error with different instects like firefly. At first there were only a couple of errors. Now I am getting several megabytes of errors.

I have minimized my CTDs and Freezes during character creation/modification by using the following 3 mods. I have several hundered warpaints, tons of hair options, tons of eye options, faces available for vanilla as well as 2 custom playable races I have installed. There is a working slider for height, breast size, head size, muslce size and full color spectrum for about any hair, warpaint and skin tones possible. RIng of change mod puts you in a "studio" lit environment where you can use a skill called changerace thru the "ShowRaceMenu" mod and with expired's racemenu you have a ton of options not normally available to you. good luck - have fun, hope this helps ShowRaceMenu Alternative - ShowRaceMenu Alternative - Latest version by seb623 http://skyrim.nexusmods.com/mods/20394 racemenu by expired http://skyrim.nexusmods.com/mods/29624#content ring fo change mod by goroUnreal http://skyrim.nexusmods.com/mods/9458