Skyrim Estrus Mod Probleme!

[darealpwnulator]

Ich nehme an du verstehst Deutsch (dein Ausgangspost war in Deutsch). Falls nicht hilft dir sicherlich der Übersetzer von Google. Aus diesem Grund antworte ich dir in Deutsch.

 

1.) Hast du SKSE installiert? Wenn nein mach dies: http://skse.silverlock.org/

Direktlink: http://skse.silverlock.org/download/skse_1_07_01_installer.exe

 

2.) Benutzt du WyreBash? Wenn nein empfehle ich dir dies: http://www.nexusmods.com/skyrim/mods/1840/?

 

3.) Ebenfalls solltest du LOOT benutzen (was du ja schon probiert hast): https://loot.github.io/

Direktlink: https://github.com/loot/loot/releases/download/v0.6.1/LOOT.Installer.exe

 

Installiere SKSE und WyreBash und ebenfalls LOOT falls du dies nicht schon getan hast.

 

4.) Prüfe bitte ob du SKYUI (SkyUI_4_1) installiert hast (ist ebenfalls eine Mod): http://www.nexusmods.com/skyrim/mods/3863/?

 

 

5.) Überprüfe ob du alle benötigten Dateien von FNIS installiert hast (am besten installierst du alle, die meisten brauchst du früher oder später für andere Mods)

FNIS Behavior V5_2, FNIS Spells V5_0_1, FNIS Creature Pack 5_0_2

 

Anschließend, wenn du diese Mods installiert hast startest du LOOT. Klickst auf "Sort Plugins" und wartest bis es durchgelaufen ist. Anschließen mit "Apply" bestätigen.

Nun gehst du in dein Skyrimverzeichnis (Skyrim\Data\tools\GenerateFNIS_for_Users\) und startest die Datei "GenerateFNISforUsers.exe" und klickst auf Update FNIS Behavior.

 

Nachdem du dies getan hast startest du Skyrim über WyreBash und klickst unten Links auf "Launch Skyrim + SKSE"

Du startest Skyrim NICHT mehr über den normalen Launcher! Nur noch über WyreBash mit SKSE!

[Horyx]

na look at that:

yes there is but one who is willing to help .... :thumbsup: :thumbsup:

I already have all the mods: SKSE, Estrus, FNIS V5_2, FNIS V5_0_1 and FNIS Creature Pack. SkyUI I have. Loot Wrye Bash and also.

had tried before with loot / Wrye Bash, but look as not quite, because everything is English and I understand absolutely NO word :verymad: :sad: :wacko: !!!

It's really crap, you can not translate the whole German !!!

Will it anyway try again.

Thank You. For any other help I am grateful !!!!!!

I use Google to translate everything. However, it has also google because its weakening.

Edited December 25, 2014 by Horyx

[Horyx]

in what sequence I need to install these mods?

or the sequence is determined by loot?

please to answer !!!!!!

[Horyx]

I thank you for your answer.

I already have all the mods (all FNIS mods, SkyUI, SKSE, Estrus, LOOT, Wyre Bash ....). Tried it with loot, but since I'm not cope because everything is in English and I do NOT word !!! Too bad you can not translate it to German. Get it nevertheless try again !!!

In what sequence do I have to install this mods?

or the sequence is determined by loot?

please to answer !!!!!!

Sorry if it comes across as funny, but I'll translate everything from google. And because the translator is also not without mistakes !!!

[darealpwnulator]

Hey Horyx! Sorry I was confused what language you speak.

 

so you're saying that skyrim now starts with the mod an dont ctd? but also the animation dont work, right? it is not enough to install the FNIS! You have to generate a new Behavior! have you done this?

 

after installing FNIS go to the directory where you have installed skyrim. if you using steam it looks like "Steam\steamapps\common\Skyrim" go forward to "Data" and then to "tools", "GenerateFNIS_for_Users".

in this directory (Steam\steamapps\common\Skyrim\Data\tools\GenerateFNIS_for_Users\) you have to start the "GenerateFNISforUsers.exe" this is a separate program which generate a new Behavior.

So start the .EXE and click on the "Update FNIS Behavior" Button and let run it.

 

the installation-order is all the same as long no other mod overwrites another mod. NMM will ask you to overwrite. if NMM not ask to overwrite or update (install normal, dont update) it is all fine. LOOT will sort the mods correctly. but you can try to drag the estrus.esp File near the bottom of your loadorder (in WyreBash) but above the bashed patch.esp dont load any mod after the bashed patch.esp

[Horyx]

I speak German. NO English. I have to translate everything from Google (even if the translation by Google is not quite perfect).

Ok, I'll try it this way. Hope that it works well.

I once again thank dr. You really are the first to really help me !!!

I'm actually a MOD newbie .... so I am very grateful for your help and explanations, my friend !!!!!

[Horyx]

Nerve I unto you, I know!

But I still hope that I finally get even more help:

My new problem:

When I go and Wrye Bash Skyrim then start (. YES, I have AALL mods I have LOOT and what is otherwise requires), I get this message:

Traceback (most recent call last):

File "bash\basher.pyo", line 17267, in Execute

File "bash\basher.pyo", line 17058, in Execute

File "bash\basher.pyo", line 16994, in ShowError

UnicodeDecodeError: 'ascii' codec can't decode byte 0xf6 in position 50: ordinal not in range(128)

What is there wrong? Did I do something wrong or forget something?

[darealpwnulator]

english:

I guess there may be something amiss with the configuration files or youre bashed patch. Have you tried to delete the bashed patch and add a new one?And iff something is missing (specially in the configuration files) you have to reinstall.

 

If you use the Standalone Version make sure that WyreBash find the Game. i recommend to use the Installer Version (Wrye Bash 305 - Installer)

 

Are all Mods highlighted in green in WyreBash and marked? If some is yellow highlighted they may cause problems. If some Mod is red you got a 100% chance to CTD or something similar error. (take a look at the atachment)

 

german/deutsch:

Ich vermute das du hier ein Problem mit der Konfiguration von WyreBash hast (eventuell fehlt etwas oder ist falsch installiert oder überschrieben worden). Vielleicht ist auch der Bashed Patch deffekt. Hast du versucht den Bashed Patch zu löschen und einen neuen zu benutzen? Ansonsten würde ich dir empfehlen WyreBash zu deinstallieren und anschließend erneut zu installieren.

 

Wenn du die Standalone Version von WyreBash benutzt solltest du prüfen ob du alles in die richtigen Ordner gepackt hast und WyreBash dein Spiel auch findet. Allerdings empfehle ich dir die Installer Version (Wrye Bash 305 - Installer)

 

Sind denn alle Mods grün und haben einen Haken? Wenn eine oder mehrere Mods gelb sind kann es zu Problemen kommen. Wird eine Mod in rot angezeigt ist dir ein CTD oder ein ähnlicher Fehler garantiert! Niemals das Spiel mit roten Mods starten. Schau mal in den Anhang, so sollte es aussehen. (Orange eingerahmt von mir = deine Mods welche geladen werden sollen, wichtig das diese grün sind und einen Haken haben, Blau eingerahmt = hier startest du das Spiel).

[Horyx]

Thank You. But I found that to be shown at LOOT / Wrye Bash OD some files in blue (not green, yellow or red).

What does this mean?

[darealpwnulator]

...

 

but you wrote that this error comes when you start Skyrim through WyreBash, or what do you mean when you say "When I go and Wrye Bash Skyrim then start.."?

Anyway this seems to be a communication problem we can not solve. my first posting was in german, but you answer me in english and told me that you cant understand because everything in this thread is english? and then you told me its crap that i dont translate the whole german? Finally you told me that you speak german and no english? And then I write again in German (and also in english) but it seems you can't understand... damn.. what should I do? my english is also not good but this is crazy.

Back to Topic: you mean on the right side in WyreBash at category "Masters"? these are the Masterfiles (esp/esm) required by the mod.

so your game will start now?