Crashing with OBSE, working without it. (Rather Large Mod List)

[darkstar0303]

I am working on a rather large mod setup for a streamer friend of mine and was wondering what could be causing me to crash when I run OBSE. It works fine without OBSe but when run with obse it will crash when i try to make a character or load a save. This is my currently active load list. Besides those I have Detailed Terrain, Broms Shiv Isles Tex Pack, Quarls full tex pack, and DarnUI

 

  Reveal hidden contents

 

 

  Reveal hidden contents

 

00 Oblivion.esm

• 01 Francesco's Leveled Creatures-Items Mod.esm [Version 5.0]

• 02 Cobl Main.esm [Version 1.72]

• 03 Francesco's Optional New Items Add-On.esm [Version 5.0]

• 04 Oscuro's_Oblivion_Overhaul.esm [Version 1.35Beta]

• 05 FCOM_Convergence.esm [Version 0.9.9MB8b1]

• 06 Mart's Monster Mod.esm [Version 3.8b1]

• 07 VVAdvanced.esm [Version 1.00]

• 08 TR_OoT_Main.esm

• 09 Fiery Fists v1.2.esp

• 0A ImmersiveWait.esp

• 0B Cobl Glue.esp [Version 1.72]

• 0C Cobl Si.esp [Version 1.63]

• 0D EnchantmentRestore_Wells.esp

• 0E EnchantmentRestore.esp

• 0F Quest Award Leveller.esp

• 10 HrmnsOblivionScriptOptimizationv1.0.esp

• 11 CavalryCustomization.esp

• 12 Chewus Oblivion Afterlife.esp

• 13 Streamline 3.1.esp

• 14 StopDarkBrotherhood.esp

• 15 Mimics!.esp

• 16 ReteroX_BBEvilSkeletons.esp

• 17 SentientWeapon.esp [Version 3]

• 18 DLCfrostcrag.esp

• 19 DLCShiveringIsles.esp

• 1A DLCThievesDen.esp

• 1B Unofficial Oblivion Patch.esp [Version 3.5.3]

• 1C Unofficial Shivering Isles Patch.esp [Version 1.5.7]

• 1D Francesco's Creatures and Items Resources.esp [Version 5.0]

• 1E Francesco's Optional Chance of Stronger Bosses.esp [Version 5.0]

• 1F UOP Vampire Aging & Face Fix.esp [Version 1.0.0]

• 20 Francesco's Optional Chance of Stronger Enemies.esp [Version 5.0]

• 21 00 Realistic Player Speech.esp

• 22 Knights.esp

• 23 Francesco's Optional Leveled Guards.esp [Version 5.0]

• 24 Francesco's Optional Chance of More Enemies.esp [Version 5.0]

• 25 DLCBattlehornCastle.esp

• 26 DLCHorseArmor.esp

• 27 FCOM_Francescos.esp [Version 0.9.9MB8b1]

• 28 DLCOrrery.esp

• 29 FCOM_FrancescosItemsAddOn.esp [Version 0.9.9MB8b1]

• 2A DLCVileLair.esp

• 2B DLCMehrunesRazor.esp

• 2C FCOM_FrancescosNamedBosses.esp [Version 0.9.9MB8b1]

• 2D FCOM_Convergence.esp [Version 0.9.9Mb8b1]

• 2E Display Stats.esp [Version 2.0.1]

• 2F DLCSpellTomes.esp

• 30 DLCHorseArmor - Unofficial Patch.esp [Version 1.0.8]

• 31 Cobl Silent Equip Misc.esp [Version 01]

• 32 DLCOrrery - Unofficial Patch.esp [Version 1.0.6]

• 33 OOOShiveringIsles.esp

• 34 OMOBS Optional Combat Settings.esp [Version 1.0]

• 35 DLCVileLair - Unofficial Patch.esp [Version 1.0.11]

• 36 Bob's Armory Oblivion.esp

• 37 DLCMehrunesRazor - Unofficial Patch.esp [Version 1.0.7]

• 38 DLCBattlehornCastle - Unofficial Patch.esp [Version 1.0.11]

• 39 ArmamentariumStaffs.esp

• 3A Immersive Weapons.esp

• 3B Weapons Of Morrowind - Daedric Crescent.esp

• 3C DLCThievesDen - Unofficial Patch.esp [Version 1.0.13]

• 3D DLCThievesDen - Unofficial Patch - SSSB.esp [Version 1.0.13]

• 3E FCOM_BobsArmory.esp [Version 0.9.9MB8b1]

• 3F Oblivion WarCry EV.esp [Version 1.09]

• 40 FCOM_WarCry.esp [Version 0.9.9MB8b1]

• 41 Oscuro's_Oblivion_Overhaul.esp [Version 1.35Beta]

• 42 OOO-Water_Weeds.esp [Version 1.33]

• 43 OOO-Map_Markers_Stock.esp [Version 1.33]

• 44 OOO-No_Guild_Ownership.esp [Version 1.33]

• 45 OOO-Container_Trap_Instant_Effects.esp [Version 1.33]

• 46 Mart's Monster Mod - Additional Enemy NPC Vars.esp [Version 3.8b1]

• 47 FCOM_RealSwords.esp [Version 0.9.9MB8]

• 48 FCOM_DurabilityAndDamage.esp [Version 0.9.9]

• 49 FCOM_SpawnRatesStronger.esp [Version 0.9.9Mb3]

• 4A Mart's Monster Mod - More Wilderness Life.esp [Version 3.8b1]

• 4B Mart's Monster Mod - Extra Wounding.esp [Version 3.8b1]

• 4C Mart's Monster Mod - Looting NPCs & Creatures.esp [Version 3.8b1]

• 4D Mart's Monster Mod - Dungeons of MMM.esp [Version 3.8b1]

• 4E Mart's Monster Mod - Hunting & Crafting.esp [Version 3.7b7]

• 4F Mart's Monster Mod - Farm Animals.esp [Version 3.8b1]

• 50 Mart's Monster Mod - Diverse WaterLife.esp [Version 3.8b1]

• 51 Creature Diversity.esp

• 52 FCOM_DiverseGuardUnity.esp [Version 0.9.9]

• 53 FCOM_BobsGuardUnity.esp [Version 0.9.9]

• 54 FCOM_HungersUnitySI.esp [Version 0.9.9]

• 55 Mart's Monster Mod - Diverse Creatures Expansion.esp [Version 3.8b1]

• 56 Mart's Monster Mod - RadiantAITweaks.esp

• 57 Mart's Monster Mod - More Passive Wildlife.esp [Version 3.8b1]

• 58 Mart's Monster Mod - Mummies.esp

• 59 FCOM_MoreRandomSpawns.esp [Version 0.9.9]

• 5A FCOM_MoreRandomItems.esp [Version 0.9.9]

• 5B Mart's Monster Mod - Shivering Isles.esp [Version 3.8b1]

• 5C MMM-Cobl.esp [Version 1.69]

• 5D Weapon Expansion Pack for Oblivion Nthusiasts.esp [Version 1.03]

• 5E Servant of the Dawn.esp

• 5F DLCFrostcrag - Unofficial Patch.esp [Version 1.0.9]

• 60 Knights - Unofficial Patch.esp [Version 1.1.6]

• 61 Mart's Monster Mod - City Defences.esp [Version 3.8b1]

• 62 FCOM_Knights.esp [Version 0.9.9MB8b1]

• 63 300 Arcane University.esp

• 64 AutoBookPlacer.esp [Version 3.02]

• 65 GMArcheryRebalance.esp [Version 1.0]

• 66 SetEssentialActors.esp

• 67 SpellSinger.esp

• 68 Vector.esp [Version 0.4]

• 69 BFG's Enhanced Armory.esp

• 6A Cobl Races.esp [Version 1.52]

• 6B Cobl Races - Balanced.esp [Version 1.52]

• 6C Mart's Monster Mod - Resized Races.esp [Version 3.8b1]

• 6D OblivionReloaded.esp

• 6E Really Immersive Messages.esp

• 6F FFVV_OOO_Birthsigns.esp

• 70 Falling Leaves.esp [Version 1.0]

• 71 ReneerRainMod.esp

• 72 CT-Just Another Combatant.esp

• 73 sycNiceToMeetYou.esp

• 74 Jail Break Escape Routes.esp

• 75 drunk_with_SI_and_COBL.esp

• 76 CRTRenewed.esp

• 77 HAZeatanimations.esp

• 78 Alternate Start.esp

• 79 PersuasionOverhaul.esp [Version 1.43]

• 7A VVAdvanced-SI.esp [Version 1.00]

• 7B VVAdvanced.esp [Version 1.00]

• 7C PersuasionOverhaul_MMM.esp [Version 1.2]

• 7D Camping.esp

• 7E QQuix - Rock, rock, rock your ship - V3.esp

• 7F PersuasionOverhaul_OOO.esp [Version 1.2]

• 80 StarX Vanilla Vampires Revised.esp

• 81 PassengerShips.esp

• 82 Farolillo.esp

• 83 GOSH.esp

• 84 TOTF.esp

• 85 Malevolent.esp

• 86 FrostcragRebornCobl.esp

• 87 P1DkeyChain.esp [Version 5.00]

• 88 Lush & Gaudy Lava.esp

• 89 Lush & Gaudy Oblivion Weather.esp

• 8A Jump Adjustment-2211.esp

 

 

Here is my OBSE Plugin List:

  Reveal hidden contents

Blockhead

Conscribe

Oblivion Reloaded

Elys_Uncapper

Enhanced Camera

obse_Jail_fix

obse_training_fix

Stutter_Remover

My mod ini settings:

  Reveal hidden contents

BFG Enhanced Armory

  Reveal hidden contents

;=============================================================================;
; ;
; This is the INI file for: BFG's ENHANCED ARMORY REALISM (BEAR) v1.75 ;
; This file may be edited to set the mod's preferences. ;
; This file should be placed in your Oblivion\Data\INI folder. ;
; ;
;=============================================================================;




; Armor and Clothing Settings ;
;=============================================================================;

; This setting affects how quickly the mod checks armor or clothing conditions
; (i.e. whether armor has broken, whether the enchantment strength on a piece
; of equipment needs to change, etc.) The setting is = how many seconds before
; the check is repeated. While the default is 1, if you're on a slower machine
; or are running large mods such as MMM or OOO, you should consider increasing
; the number. Valid values are 0.2 to 60.
set BFGMaster.ini_armorupdate to 1


; This setting controls whether NPCs and creatures can have their armor
; unequipped, clothing equipped, and armor enchantments scaled according to
; damage. 0 = only the player is affected by the below settings, 1 = NPCs
; and creatures are also affected. Default is 1.
set BFGMaster.ini_armoraffectNPCs to 1


; This setting turns unequipping of broken armor (player or NPC) on or off.
; 0 = off, 1 = on. Default is on. If AffectNPCs is set to 0, only the
; player is affected by this setting.
set BFGMaster.ini_unequipbrokenarmor to 1


; This setting affects whether armor falls to the ground when it breaks.
; 0 = Broken armor is placed in inventory, 1 = Broken armor falls off.
; Default is 1. If AffectNPCs is set to 0, only the player is affected
; by this setting. If UnequipBrokenArmor is set to 0, this setting has no
; effect. This setting also has no effect if the armor disintegrates.
set BFGMaster.ini_brokenarmorfalls to 1


; This setting affects whether armor that has broken can disintegrate
; beyond repair (i.e. be removed from the game). 0 = Disintegration cannot
; occur; 100 = maximum chance of disintegration. Default is 0. The chance
; of disintegration is based off of this setting, Armorer skill, Light/Heavy
; Armor skill, and Luck. If all 4 values are at 100, armor will break about
; 22% of the time. If AffectNPCs is set to 0, only the player is affected
; by this setting. If UnequipBrokenArmor is set to 0, this setting has no
; effect.
set BFGMaster.ini_armorisdestroyed to 0


; This setting turns equipping of clothes to replace broken armor (player or
; NPC) on or off. 0 = off, 1 = on. Default is on. If AffectNPCs is set to
; 0, only the player is affected by this setting. If UnequipBrokenArmor is
; set to 0, this setting has no effect.
set BFGMaster.ini_equipclothes to 1


; This setting determines whether clothing gives a small amount of armor
; protection when worn. The amount given is dependent on the clothing weight.
; 0 = off, and 100 = Heavy (4 lbs.) clothing gives the same protection as Fur
; Armor (at a Light Armor skill of 100). Default is 100; valid range is 0 to
; 500. If AffectNPCs is set to 0, only the player is affected by this setting.
set BFGMaster.ini_clotharmorstrength to 100


; This setting determines the strength of the armor enchantment scaling.
; Valid settings are 0 (armor enchantment scaling is disabled) to 100 (armor
; enchantment strength scales 100% with armor damage, i.e. armor that is
; half damaged would have half its enchantment strength).
; Default setting is 80.
set BFGMaster.ini_enchantstrength to 80


; Weapon Settings ;
;=============================================================================;

; This setting affects how quickly the mod checks weapon conditions (i.e.
; (whether a weapon has broken or been disarmed, whether the charge require-
; ment on a weapon needs to change, etc.) The setting is = how many seconds
; before the check is repeated. While the default is 1, if you're on a slower
; machine or are running large mods such as MMM or OOO, you should consider
; increasing the number. Valid values are 0.2 to 60.
set BFGMaster.ini_wpnupdate to 1


; This setting controls whether NPCs and creatures can have their weapon
; charges (weapon magic effectiveness) scaled according to weapon damage, and
; whether they can automatically equip a new weapon in their inventory if their
; old one breaks or is disarmed. 0 = only the player is affected by the below
; settings, 1 = NPCs and creatures are also affected. Default is 1.
set BFGMaster.ini_wpnaffectNPCs to 1


; This setting turns automatic equipping of weapons when the current one has
; just broken, or when the player or NPC has been disarmed, on or off.
; 0 = off, 1 = on. Default is on. If AffectNPCs is set to 0, only the player
; is affected by this setting.
set BFGMaster.ini_reequipweapon to 1


; This setting affects whether weapons fall to the ground when broken.
; 0 = Broken weapons are placed in inventory, 1 = Broken weapons fall to the
; ground. Default is 1. If AffectNPCs is set to 0, only the player is
; affected by this setting. If ReEquipWeapon is set to 0, this setting has
; no effect. This setting also has no effect if the weapon disintegrates.
set BFGMaster.ini_brokenweaponfalls to 1


; This setting affects whether a weapon that has broken can disintegrate
; beyond repair (i.e. be removed from the game). 0 = Disintegration cannot
; occur; 100 = maximum chance of disintegration. Default is 0. The chance
; of disintegration is based off of this setting, Armorer skill, Blade/Blunt/
; Marksman skill, and Luck. If all 4 values are at 100, weapons will break
; about 22% of the time. If AffectNPCs is set to 0, only the player is
; affected by this setting. If ReEquipWeapon is set to 0, this setting has
; no effect.
set BFGMaster.ini_wpnisdestroyed to 0


; This setting determines the strength of the weapon charge scaling.
; Valid settings are 0 (weapon charge scaling is disabled) to 100 (weapon
; charge strength scales 100% with weapon damage, i.e. a weapon that is
; half damaged would need twice as many charges for its enchantment).
; Default setting is 50.
set BFGMaster.ini_chargestrength to 50

Display Stats:

  Reveal hidden contents

Display Stats.ini
; =====================
;
; Version: 2.0.1
; Author: Ole Boe / TheNiceOne
;

; The settings are read each time a game is loaded with this mod activated
set tnoDS.debug to 0

; For the show_... settings, 0, 1 or 2 is allowed, with the following meaning:
; 0: Not displayed
; 1: Always displayed
; 2: Only displayed when display key is held down

; Displays base health of weapons/armor
set tnoDS.show_health to 1

; Displays reach of weapons
set tnoDS.show_reach to 1

; Displays speed of weapons
set tnoDS.show_speed to 1

; Displays base armor rating of armor
set tnoDS.show_armorRating to 1

; Displays base damage of weapons
set tnoDS.show_damage to 1

; Displays damage rate of weapons (base damage * speed)
set tnoDS.show_damageRate to 1

; Displays whether the weapons ignore Resist Normal Weapons. This has one additional possible value:
; 3: Always display for weapons that ignore resistance, never for others.
set tnoDS.show_ignoreResistance to 3

; Displays value/weight ratio of items
set tnoDS.show_valueRatio to 1

; Displays base value of items when in barter menu
set tnoDS.show_baseValue to 1


; Displays arrow case limit for the arrow case added by Duke Patricks Combat Archery mod
set tnoDS.show_arrowCaseLimit to 1


; Set display key that must be held down to display stats with setting 2.
; Default is S - 31
set tnoDS.show_key to 31



; Displays name of stat (in addition to icon and value) in the popup. If disabled, only icon and value is shown.
set tnoDS.show_text to 1

Fran Creatures/Items:

  Reveal hidden contents

============ Francesco's Creatures and Items Configuration ============

; INI file for configuring the mod.
; Original mod by Francesco.
; Updated and maintained by SomeWelshGuy.

;============ General Loot Settings ============
; Numbers here control the probabiity of loot. Higher values mean a LOWER chance of receiving loot. ; 0 = normal, vanilla loot chance
; 50 = hardcore loot chance
; 100 = extra-hardcore loot chance
; The default for all these options are 50, however any value between 0 and 100 can be Set.

Set FranLoot.NPCBandit to 50 ; Bandit caves
Set FranLoot. NPCConjurer to 50 ; Conjurer dungeons
Set FranLoot.NPCMaraud to 50 ; Mauderer forts
Set FranLoot.NPCNecro to 50 ; Necromancer hideouts
Set FranLoot. NPCVampire to 50 ; Vampire lairs
Set FranLoot.Misc to 50 ; Other areas (creature lairs etc.)
Set FranLoot.Chest to 50 ; Generic dunegon chests
Set FranLoot.ChestHouse to 50 ; House chests

; Chance of magic items being found in loot. Works as a modifier between -100%, where no magic items are found, and +100%, where every item found is magic. Default value of 0.
Set FranLoot.Magic to 0

; ============ Dungeon Chest Modifiers ============
; Note: These settings only apply if optional dungeon chest loot is also installed.
; Defaults are 0.

; Setting to 1 gives more chance of armour and weapons to appear.
Set Franloot.ChestMArms to 0

; Setting to 1 gives more chance of gold to appear.
Set FranLoot.ChestMGold to 0

; Setting to 1 gives more chance of gems to appear.
Set FranLoot.ChestMGems to 0

; ============ Dungeon Chest Locks Modifiers ============
; Note: These settings only apply if optional dungeon chest locks is also installed.

; Setting to 1 makes chests more random and less based on player level. Usually, chests with harder locks have better loot. Default is 1.
Set FranLoot.RandomizeLocks to 1

; Value between -5 and 96. Increasing this makes chests more likely to be trapped, raising it makes it more likely. Default 0.
Set FranLoot.ChestTrap to 0

; Value between -6 and 94. Increasing this makes it more likely a chest can be locked with a key, with a guardian enemy holding the key.
; Guardian must be killed to open the chest. Lowering this value makes a guardian less likely to appear, and the chest locked normally. Default 0
Set FranLoot.ChestKey to 0

; ============ House Chest Modifiers ============
; Note: These settings only apply if optional house chest loot is also installed.
; Defaults are 0.

; Setting to 1 gives more chance of armour and weapons to appear.
Set FranLoot.ChestHouseMArms to 0

; Setting to 1 gives more chance of gold to appear.
Set FranLoot.ChestHouseMGold to 0

; Setting to 1 gives more chance of gems to appear.
Set FranLoot.ChestHouseMGems to 0

;============ Combat Behaviour Settings ============
; NPC flee chances. Minimum value of 0, maximum of 2.
; Higher values mean more chance of fleeing.
; Default values are 1

; Chance of NPCs fleeing at low health.
Set FranLoot.HFleeMod to 1

; Chance of NPCs fleeing when the NPCs level is less than their combatant
Set FranLoot.LFleeMod to 1

;============ Creatures Addon Settings ============
; Note: These settings only apply if the optional creatures addon is also installed.

; Faction Fights
; Value between 0 and 10. Higher the value, more chance of fights between opposing factions. Default is 1.5.
Set FranAddOnCrea.Factions to 1.5

; Chance of creature resizing
; Value between 0 and 100. That value being the chance that creatures will be randomly resized. Default is 75.
Set FranAddOnCrea.ScalingChance to 75

; Maximum creature size
; Value between 166 and 375. This is with 375 being no size scaling (+0% scaling), and 166 being a fair bit larger (+25% scaling). Default is 250.
Set FranAddOnCrea.MaxScaling to 250

; Minimum creature size
; Value between 83 and 250. This is with 83 being no size scaling (-0% scaling), and 250 being a fair bit smaller (-25% scaling). Default is 125.
Set FranAddOnCrea.MinScaling to 125

; == Animal Behaviours ==

; Flee on sight chance
; Animals have a chance of avoiding a fight if approached by an NPC or creature. Values between -2 and 10, where -2 makes the chance 0, and 10 makes the chance is high. Default is 0
Set FranAddOnCrea.Flee02 to 0

; Flee on low health chance
; Animals have a chance to flee when low on health. Values between 0 and 50, where 0 is a 0% chance. Default is 15.
Set FranAddOnCrea.Flee01 to 15

; Passive chance
; Animals have a chance to be non-aggressive. Values between -3 and 25, where -3 makes the chance 0, and 25 makes the chance high. Default is 0.
Set FranAddOnCrea.Passive to 0

; Look for water
; Animals will sometimes go look for water. Values between 0 and 35, where 0 is a 0% chance. Default is 15.
Set FranAddOnCreaFindWater to 15

; == Undead Rising ==
; Undead will have a chance come back alive after being killed. Values between 0 and 50, where 0 is a 0% chance. Default is 20.
Set FranAddOnCrea.RisingChance to 20

; This chance is only valid for a certain amount of time after death. You can change the time here.
; Values between 1 and 10, where each 1 is equivalent to 1.5 minutes. So 1 being up to 1.5 minutes and 10 being up to 15 minutes. Default is 2 (3 minutes).
Set FranAddOnCrea.RisingTimer to 2


;============ Items Addon Settings ============
; Note: These settings only apply if the optional items addon is also installed.

; Enable or disable the items addon.
Set FranLoot.AddOnItem to 1

; Chance of each individual new addon item type spawning.
; The vales work on a ratio basis, for example 6 means there's a 1/6 chance of a new item spawning.
; Setting a value to 1 will always make a new item spawn. The higher the value, the rarer the spawn chance.

; == Normal Items ==
Set FranLoot.AddOnBoots to 6 ; Chance of new boots spawning. Default 6.
Set FranLoot.AddOnCuirass to 6 ; Chance of new curiass spawning. Default 6.
Set FranLoot.AddOnGauntlets to 4 ; Chance of new gauntlets spawning. Default 4.
Set FranLoot.AddOnGreaves to 4 ; Chance of new greaves spawning. Default 4.
Set FranLoot.AddOnHelmet to 4 ; Chance of new helmet spawning. Default 4.
Set FranLoot.AddOnShield to 5 ; Chance of new shield spawning. Default 5.
Set FranLoot.AddOnWeap to 5 ; Chance of new weapon spawning. Default 5.

; == Magic Items ==
Set FranLoot.AddOnBootsM to 4 ; Chance of new magic boots spawning. Default 4.
Set FranLoot.AddOnCuirassM to 4 ; Chance of new magic curiass spawning. Default 4.
Set FranLoot.AddOnGauntletsM to 3 ; Chance of new magic gauntlets spawning. Default 3.
Set FranLoot.AddOnGreavesM to 3 ; Chance of new magic greaves spawning. Default 3.
Set FranLoot.AddOnHelmetM to 3 ; Chance of new magic helmet spawning. Default 3.
Set FranLoot.AddOnShieldM to 3 ; Chance of new magic shield spawning. Default 3.
Set FranLoot.AddOnWeapM to 4 ; Chance of new magic weapon spawning. Default 4.

; ============ Misc Modifiers ============
; Setting to 1 allows SI added items (such as durable weapons) to be encountered in the Cyrodiil. Only applies if the SI version is installed.
FranLoot.SILoot to 0

OblivionReloadedini:

  Reveal hidden contents

; Oblivion Reloaded configuration file for the esp (v1.5)

;Hotkeys. Use the "Dec" value from the list below.
; Hex Dec Button
; 0x01 1 Escape
; 0x02 2 1
; 0x03 3 2
; 0x04 4 3
; 0x05 5 4
; 0x06 6 5
; 0x07 7 6
; 0x08 8 7
; 0x09 9 8
; 0x0A 10 9
; 0x0B 11 0
; 0x0C 12 Minus
; 0x0D 13 Equals
; 0x0E 14 Backspace
; 0x0F 15 Tab
; 0x10 16 Q
; 0x11 17 W
; 0x12 18 E
; 0x13 19 R
; 0x14 20 T
; 0x15 21 Y
; 0x16 22 U
; 0x17 23 I
; 0x18 24 O
; 0x19 25 P
; 0x1A 26 Left Bracket
; 0x1B 27 Right Bracket
; 0x1C 28 Enter
; 0x1D 29 Left Control
; 0x1E 30 A
; 0x1F 31 S
; 0x20 32 D
; 0x21 33 F
; 0x22 34 G
; 0x23 35 H
; 0x24 36 J
; 0x25 37 K
; 0x26 38 L
; 0x27 39 Semicolon
; 0x28 40 Apostrophe
; 0x29 41 ~ (Console)
; 0x2A 42 Left Shift
; 0x2B 43 Back Slash
; 0x2C 44 Z
; 0x2D 45 X
; 0x2E 46 C
; 0x2F 47 V
; 0x30 48 B
; 0x31 49 N
; 0x32 50 M
; 0x33 51 Comma
; 0x34 52 Period
; 0x35 53 Forward Slash
; 0x36 54 Right Shift
; 0x37 55 NUM*
; 0x38 56 Left Alt
; 0x39 57 Spacebar
; 0x3A 58 Caps Lock
; 0x3B 59 F1
; 0x3C 60 F2
; 0x3D 61 F3
; 0x3E 62 F4
; 0x3F 63 F5
; 0x40 64 F6
; 0x41 65 F7
; 0x42 66 F8
; 0x43 67 F9
; 0x44 68 F10
; 0x45 69 Num Lock
; 0x46 70 Scroll Lock
; 0x47 71 NUM7
; 0x48 72 NUM8
; 0x49 73 NUM9
; 0x4A 74 NUM-
; 0x4B 75 NUM4
; 0x4C 76 NUM5
; 0x4D 77 NUM6
; 0x4E 78 NUM+
; 0x4F 79 NUM1
; 0x50 80 NUM2
; 0x51 81 NUM3
; 0x52 82 NUM0
; 0x53 83 NUM.
; 0x57 87 F11
; 0x58 88 F12
; 0x9C 156 NUM Enter
; 0x9D 157 Right Control
; 0xB5 181 NUM/
; 0xB8 184 Right Alt
; 0xC7 199 Home
; 0xC8 200 Up Arrow
; 0xC9 201 PgUp
; 0xCB 203 Left Arrow
; 0xCD 205 Right Arrow
; 0xCF 207 End
; 0xD0 208 Down Arrow
; 0xD1 209 PgDown
; 0xD2 210 Insert
; 0xD3 211 Delete
; 0x100 256 Left Mouse Button
; 0x101 257 Right Mouse Button
; 0x102 258 Middle/Wheel Mouse Button
; 0x103 259 Mouse Button 3
; 0x104 260 Mouse Button 4
; 0x105 261 Mouse Button 5
; 0x106 262 Mouse Button 6
; 0x107 263 Mouse Button 7
; 0x108 264 Mouse Wheel Up
; 0x109 265 Mouse Wheel Down

;Sets the key to purge manually
set ORPurgeQuest.PurgeKey to 88

;Sets when purger runs. 0 = Disabled, any other positive value to run every PurgeTime (in seconds).
set ORPurgeQuest.PurgeTime to 300

;Purges the textures from the video memory. 0 = Disabled, 1 = Enabled.
set ORPurgeQuest.PurgeTextures to 1

;Purges the cells from the ram. 0 = Disabled, 1 = Enabled.
set ORPurgeQuest.PurgeCells to 1

;Runs a cleanup memory pass. 0 = Disabled, 1 = Enabled.
set ORPurgeQuest.CleanMemory to 0

;Purges after x cell changes. 0 = Disabled, any number greater than 0 represents the number of cell changes.
set ORPurgeQuest.PurgeOnCellChange to 5

;Sets the key to take screenshots
set ORMenuQuest.ScreenshotKey to 87

;Sets the key to open the ingame menu
set ORMenuQuest.MenuKey to 24

;Sets the key to scroll up the ingame menu
set ORMenuQuest.UpKey to 200

;Sets the key to scroll down the ingame menu
set ORMenuQuest.DownKey to 208

;Sets the key to move right the ingame menu
set ORMenuQuest.RightKey to 205

;Sets the key to move left the ingame menu
set ORMenuQuest.LeftKey to 203

;Sets the key to add values in the ingame menu
set ORMenuQuest.AddKey to 78

;Sets the key to scroll pages up in the ingame menu
set ORMenuQuest.PageUpKey to 201

;Sets the key to scroll pages down in the ingame menu
set ORMenuQuest.PageDownKey to 209

;Sets the key to subtract values in the ingame menu
set ORMenuQuest.SubtractKey to 74

;Sets the key to save settings in the ingame menu
set ORMenuQuest.SaveKey to 28

;Sets the increment/decrement step value for the ingame menu.
set ORMenuQuest.StepValue to 0.02

;Sets the number of lines per page for the ingame menu
set ORMenuQuest.MenuLines to 20

sl.ini

  Reveal hidden contents

;===================================================================================
;===================================================================================
;;
;; Streamline 3.1 INI File
;;
;; Profile Name: "Streamline 3.1 Default"
;; -------------------------------------------------------------
;; Profile Author: Jaga Telesin (jagatelesin@gmail.com)
;; Profile Date: January 9th, 2008
;; INI path: \Oblivion\Data\Streamline\INI Files\
;; -------------------------------------------------------------
;; Profile Details: Default profile
;; Developed on: Intel Q6700 @ 3.2ghz, 4x1gb RAM
;; Nvidia Ultra 8800, 6x500gb SATA RAID0
;;
;===================================================================================
;===================================================================================


;===================================================================================
; [Main Features Settings] Toggle Streamline Features (1=on, 0=off)
;===================================================================================
set SLv.Purging to 1 ; Turn on Streampurge? (cache purging)
set SLv.FPSsmoothing to 1 ; Turn on Streamsmooth? (FPS smoothing)
set SLv.Streamsaving to 1 ; Turn on Streamsaving? (timed autosaves)
set SLv.Streamsight to 1 ; Turn on Streamsight? (FPS enhancer)


;===================================================================================
; [streampurge Settings] An automated cache-cleaner for Oblivion
;===================================================================================
set SLh.SLmode to 4 ; Memory Purge Mode (1-6) (Default: 3)
; Lower # = faster, higher # = slower
set SLv.PurgeOnTravel to 0 ; Purge memory on travel & zone?
set SLv.PurgeOnWait to 1 ; Purge memory when character waits?
set SLv.PurgeOnSleep to 1 ; Purge memory when character sleeps?


;===================================================================================
; [streamsmooth FPS Settings] Acceptable Minimum FPS & Detail Settings
;===================================================================================
set SLfpsmon.High to 31 ; Highest minimum FPS (top of range)
set SLfpsmon.Low to 26 ; Lowest minimum FPS (bottom of range)
;-----------------------------------------------------------------------------------
set SLv.maxVLOD to 100 ; Highest overall level of detail (%)
; Default: 100 (Max: 100)
set SLv.minVLOD to 0 ; Lowest overall level of detail (%)
; Default: 0 (Min: 0)
;-----------------------------------------------------------------------------------
set SLv.CombatFPS to 3.0 ; The number of FPS added to the min/max
; range when combat is happening nearby
;-----------------------------------------------------------------------------------
set SLv.FPSmoninterval to 6 ; Update interval for FPS smoothing
; (Number of updates per second)
; Faster updates = smoother performance
; Smoother performance = more CPU usage
; Default: 6/sec
set SLv.sensitivity to 7.0 ; Sensitivity to changes (Default: 7.0)
; This is a relative number representing
; how fast Streamsmooth tries to adjust
; details to reach your FPS range.
; Lower numbers = faster changes


;===================================================================================
; [streamsmooth Visual Categories] What can Streamsmooth change on-the-fly?
;===================================================================================
set SLv.setDetail to 1 ; LOD Detail, Specular, etc.
set SLv.setGrass to 1 ; Grass density, range, etc
set SLv.setTrees to 1 ; Tree detail, range, etc
set SLv.setLightShadow to 1 ; Shadow number & range, etc.
set SLv.setObjects to 1 ; Actors, Objects & Items distances
set SLv.setWater to 1 ; Water details & reflections


;===================================================================================
; [streamsave Settings] Streamsave configuration
;===================================================================================
set SLv.SaveTimer to 10 ; Autosave interval (in actual minutes)
set SLv.NumSaveSlots to 15 ; Number of save slots to use (Max: 60)
;-----------------------------------------------------------------------------------
set SLv.DuringCombat to 0 ; Allow save during combat?
set SLv.WhileYielding to 0 ; Allow save while yielding?
set SLv.DangerousArea to 0 ; Allow save in dangerous environment?
set SLv.AllowTrespass to 0 ; Allow saving while trespassing?
set SLv.AllowSwimming to 0 ; Allow saving while swimming?
set SLv.AllowSneaking to 0 ; Allow saving while sneaking?
set SLv.AllowWeapon to 0 ; Allow saving while weapon out?
;-----------------------------------------------------------------------------------
set SLv.AfterCombat to 1 ; Force a save after each combat ends?
set SLv.InteriorOnly to 0 ; Save only when indoors?
set SLv.WhenIdleOnly to 0 ; Save only when character is idle?
set SLv.AfterZone to 0 ; Save after fast-travel or door use?
set SLv.AfterWaitSleep to 0 ; Save after waiting or sleeping?
;-----------------------------------------------------------------------------------
set SLv.PlaySoundOnSave to 1 ; Play a sound on save?
set SLv.GagAutoSaves to 0 ; Prevent an on-screen save message?
set SLv.SaveReminders to 0 ; Use Save Reminders instead of autosaves?
set SLv.UseLiteReminders to 0 ; Use messages (upper left area of screen)
; instead of message boxes?
; Note: requires SaveReminders enabled
set SLv.SecureAutoSaves to 0 ; Use menumode to produce a secure
; autosave instead of using save slots?
; Note: disables multiple save slots!
;-----------------------------------------------------------------------------------
set SLv.LowHealth to 0 ; Allow save while health low?
set SLv.LowHealthThreshold to 0.20 ; Don't save when health lower than x%
; 0.20 = 20%
;-----------------------------------------------------------------------------------
set SLv.SaveBeforeFastQuit to 0 ; Do a Streamsave before a Fast-Quit?
;-----------------------------------------------------------------------------------
set SLv.PurgeBeforeSave to 1 ; Do a purge before a Streamsave?
; Can help with stability of saving


;===================================================================================
; [streamsight Settings] Refer to documentation for values
;===================================================================================
set SLv.MinDistanceFog to 30000 ; Min distance before fog starts (0%)
set SLv.MaxDistanceFog to 136000 ; Max distance before fog ends (100%)
set SLv.MinWaterFog to 0 ; Min distance before water fog starts
set SLv.MaxWaterFog to 2500 ; Max distance before water fog ends
;-----------------------------------------------------------------------------------
set SLv.WeatherUnsticker to 1 ; Leave set at 1 unless you use a
; scripted weather mod
;-----------------------------------------------------------------------------------
set SLv.ExtremeClipping to 0 ; Turn on clipping behind distant fog?
; Gains FPS, but can cause some
; clipping of distant mountains
set SLv.ClipMin to 40000 ; Range under which clipping will stop
set SLv.FogUpdateFrequency to 6 ; Speed control for fog updates (1 - 10)
; # of updates per sec (Default: 6)


;===================================================================================
; [Miscellaneous Settings] Other misc settings for Streamline
;===================================================================================
set SLv.slFOVauto to 0 ; Can Streamline automatically alter FOV?
set SLfov to 75 ; Field of View (FOV) Angle desired
set SLv.FOVInDialogs to 0 ; Allow FOV changes during chat dialogs?
; Note: FOV changes work in 1st person
; gameplay only
;-----------------------------------------------------------------------------------
set SLKillCorpses to 0 ; De-crucifies standing, dead actors
set SLv.MinKillDistance to 6000 ; Minimum distance from player a corpse
; needs to be for KillCorpses to work
; on it. (Default: 6000)
;-----------------------------------------------------------------------------------
set SLdebug to 0 ; Turn on/off debug messages in console
; Debug level 1: Standard messages
; Debug level 2: Detailed messages
; Note: Debug level 2 can adversely
; affect FPS performance, but
; is highly detailed.
; (requires SL's debug esp to work)


;===================================================================================
; [Hotkey Configuration] Hotkey combination settings for Streamline
;===================================================================================
;
; Full list of key codes: http://www.tronan.com/macromachine/scripthelp/VK.htm
;
;===================================================================================
; - To disable the modifier key on any key combination, use 0 for the ModKey value
; - To disable a hotkey completely, use 0 for its main key
; - Disabling the Streamline main menu hotkey is *not* recommended
;===================================================================================
set SLv.TogglePurgeModKey to 18 ; ALT
set SLv.TogglePurgeKey to 80 ; p
;-----------------------------------------------------------------------------------
set SLv.ToggleSmoothingModKey to 18 ; ALT
set SLv.ToggleSmoothingKey to 70 ; f
;-----------------------------------------------------------------------------------
set SLv.MenuModKey to 17 ; CTRL
set SLv.MenuKey to 36 ; Home
;-----------------------------------------------------------------------------------
set SLv.PurgeModKey to 17 ; CTRL
set SLv.PurgeKey to 46 ; del
;-----------------------------------------------------------------------------------
set SLv.MaxVLODModKey to 17 ; CTRL
set SLv.MaxVLODKey to 221 ; ]
;-----------------------------------------------------------------------------------
set SLv.MinVLODModKey to 17 ; CTRL
set SLv.MinVLODKey to 219 ; [
;-----------------------------------------------------------------------------------
set SLv.AutoVLODModKey to 17 ; CTRL
set SLv.AutoVLODKey to 8 ; backspace
;-----------------------------------------------------------------------------------
set SLv.IncVLODModKey to 17 ; CTRL
set SLv.IncVLODKey to 190 ; .
;-----------------------------------------------------------------------------------
set SLv.DecVLODModKey to 17 ; CTRL
set SLv.DecVLODKey to 188 ; ,
;-----------------------------------------------------------------------------------
set SLv.SaveModKey to 0 ;
set SLv.SaveKey to 121 ; (F10=121) (F5=116)
;-----------------------------------------------------------------------------------
set SLv.MusicModKey to 18 ; ALT
set SLv.MusicKey to 77 ; m
;-----------------------------------------------------------------------------------
set SLv.FastQuitModKey to 17 ; CTRL
set SLv.FastQuitKey to 0 ; off, suggested key: F12 (123)
;-----------------------------------------------------------------------------------
set SLv.ForceKillModKey to 17 ; CTRL
set SLv.ForceKillKey to 45 ; insert


;===================================================================================
; [Detailed Streamsmooth Settings] Individual Settings (for ADVANCED users)
;===================================================================================
set SLv.AA0 to 1.0 ; Enable?
set SLv.AA1 to 100.0 ; highVLOD - fSpecualrStartMax
set SLv.AA2 to 16.0 ; lowVLOD "The maximum range of Specular
set SLv.AA3 to 2400.0 ; maxVAL lighting effects. Ties in
set SLv.AA4 to 350.0 ; minVAL directly to fSpecularLOD"
;-----------------------------------------------------------------------------------
set SLv.AC0 to 1.0 ; Enable?
set SLv.AC1 to 100.0 ; highVLOD - fSpecularLOD2
set SLv.AC2 to 16.0 ; lowVLOD "Max range at which Level of
set SLv.AC3 to 2700.0 ; maxVAL detail (LOD) used for
set SLv.AC4 to 300.0 ; minVAL specular lighting effects"
;------------------------------------------
set SLv.AD0 to 1.0 ; Enable?
set SLv.AD1 to 100.0 ; highVLOD - fSpecularLOD1
set SLv.AD2 to 16.0 ; lowVLOD "Min range at which Level of
set SLv.AD3 to 2400.0 ; maxVAL detail (LOD) used for
set SLv.AD4 to 0.0 ; minVAL specular lighting effects"
;-----------------------------------------------------------------------------------
set SLv.AE0 to 1.0 ; Enable?
set SLv.AE1 to 90.0 ; highVLOD - iMinGrassSize
set SLv.AE2 to 10.0 ; lowVLOD "Grass density (inverse #)
set SLv.AE3 to 80.0 ; maxVAL Larger numbers mean less
set SLv.AE4 to 130.0 ; minVAL grass & higher framerates"
;-----------------------------------------------------------------------------------
set SLv.AF0 to 1.0 ; Enable?
set SLv.AF1 to 100.0 ; highVLOD - fGrassEndDistance
set SLv.AF2 to 0.0 ; lowVLOD "Max distance at which to
set SLv.AF3 to 7000.0 ; maxVAL display grass"
set SLv.AF4 to 3000.0 ; minVAL
;------------------------------------------
set SLv.AG0 to 1.0 ; Enable?
set SLv.AG1 to 100.0 ; highVLOD - fGrassStartFadeDistance
set SLv.AG2 to 0.0 ; lowVLOD "Distance from player at which
set SLv.AG3 to 6000.0 ; maxVAL grass begins to fade out"
set SLv.AG4 to 2000.0 ; minVAL
;-----------------------------------------------------------------------------------
set SLv.AH0 to 1.0 ; Enable?
set SLv.AH1 to 75.0 ; highVLOD - iMaxGrassTypesPerTexure
set SLv.AH2 to 30.0 ; lowVLOD "Number of possible textures
set SLv.AH3 to 4.0 ; maxVAL used per grass type"
set SLv.AH4 to 1.0 ; minVAL
;-----------------------------------------------------------------------------------
set SLv.AJ0 to 1.0 ; Enable?
set SLv.AJ1 to 100.0 ; highVLOD - iActorShadowCountInt
set SLv.AJ2 to 20.0 ; lowVLOD "Number of actor shadows
set SLv.AJ3 to 10.0 ; maxVAL displayed when indoors"
set SLv.AJ4 to 0.0 ; minVAL
;------------------------------------------
set SLv.AK0 to 1.0 ; Enable?
set SLv.AK1 to 100.0 ; highVLOD - iActorShadowCountExt
set SLv.AK2 to 25.0 ; lowVLOD "Number of actor shadows
set SLv.AK3 to 10.0 ; maxVAL displayed when outdoors"
set SLv.AK4 to 0.0 ; minVAL
;-----------------------------------------------------------------------------------
set SLv.AL0 to 1.0 ; Enable?
set SLv.AL1 to 100.0 ; highVLOD - fShadowLOD2
set SLv.AL2 to 25.0 ; lowVLOD "Max range at which shadows
set SLv.AL3 to 2900.0 ; maxVAL are displayed"
set SLv.AL4 to 400.0 ; minVAL
;------------------------------------------
set SLv.AM0 to 1.0 ; Enable?
set SLv.AM1 to 100.0 ; highVLOD - fShadowLOD1
set SLv.AM2 to 25.0 ; lowVLOD "Range at which a lower level
set SLv.AM3 to 2800.0 ; maxVAL of detail (LOD) starts being
set SLv.AM4 to 200.0 ; minVAL used for shadows"
;-----------------------------------------------------------------------------------
set SLv.AP0 to 1.0 ; Enable?
set SLv.AP1 to 70.0 ; highVLOD - iShadowFilter
set SLv.AP2 to 20.0 ; lowVLOD "Low/Medium/High shadow
set SLv.AP3 to 2.0 ; maxVAL detail. Alters softness on
set SLv.AP4 to 0.0 ; minVAL edges of shadows"
;-----------------------------------------------------------------------------------
set SLv.AS0 to 1.0 ; Enable?
set SLv.AS1 to 100.0 ; highVLOD - fLODFadeOutMultActors
set SLv.AS2 to 0.0 ; lowVLOD "Relative range at which
set SLv.AS3 to 15.0 ; maxVAL actors begin to fade out"
set SLv.AS4 to 4.0 ; minVAL
;------------------------------------------
set SLv.AT0 to 1.0 ; Enable?
set SLv.AT1 to 100.0 ; highVLOD - fLODFadeOutMultItems
set SLv.AT2 to 0.0 ; lowVLOD "Relative range at which
set SLv.AT3 to 15.0 ; maxVAL items begin to fade out"
set SLv.AT4 to 1.5 ; minVAL
;------------------------------------------
set SLv.AU0 to 1.0 ; Enable?
set SLv.AU1 to 100.0 ; highVLOD - fLODFadeOutMultObjects
set SLv.AU2 to 0.0 ; lowVLOD "Relative range at which
set SLv.AU3 to 15.0 ; maxVAL objects begin to fade out"
set SLv.AU4 to 4.5 ; minVAL
;-----------------------------------------------------------------------------------
set SLv.AY0 to 1.0 ; Enable?
set SLv.AY1 to 30.0 ; highVLOD - fTalkingDistance
set SLv.AY2 to 0.0 ; lowVLOD
set SLv.AY3 to 2000.0 ; maxVAL
set SLv.AY4 to 1000.0 ; minVAL
;-----------------------------------------------------------------------------------
set SLv.AZ0 to 1.0 ; Enable?
set SLv.AZ1 to 100.0 ; highVLOD - fLodDistance
set SLv.AZ2 to 0.0 ; lowVLOD
set SLv.AZ3 to 2000.0 ; maxVAL
set SLv.AZ4 to 250.0 ; minVAL
;-----------------------------------------------------------------------------------
set SLv.BA0 to 1.0 ; Enable?
set SLv.BA1 to 100.0 ; highVLOD - fFadeDistance
set SLv.BA2 to 0.0 ; lowVLOD
set SLv.BA3 to 15288.0 ; maxVAL
set SLv.BA4 to 9288.0 ; minVAL
;-----------------------------------------------------------------------------------
set SLv.BE0 to 1.0 ; Enable?
set SLv.BE1 to 66.0 ; highVLOD - bEquippedTorchesCastShadows
set SLv.BE2 to 65.0 ; lowVLOD
set SLv.BE3 to 1.0 ; maxVAL
set SLv.BE4 to 0.0 ; minVAL
;-----------------------------------------------------------------------------------
set SLv.BK0 to 1.0 ; Enable?
set SLv.BK1 to 40.0 ; highVLOD - fTreeLODExponent
set SLv.BK2 to 10.0 ; lowVLOD
set SLv.BK3 to 1.0 ; maxVAL
set SLv.BK4 to 0.2 ; minVAL
;-----------------------------------------------------------------------------------
set SLv.BL0 to 1.0 ; Enable?
set SLv.BL1 to 60.0 ; highVLOD - bUseWaterReflectionsMisc
set SLv.BL2 to 59.0 ; lowVLOD "Turns on water reflections
set SLv.BL3 to 1.0 ; maxVAL for Misc objects (rocks etc)"
set SLv.BL4 to 0.0 ; minVAL
;-----------------------------------------------------------------------------------
set SLv.BM0 to 1.0 ; Enable?
set SLv.BM1 to 30.0 ; highVLOD - bUseWaterReflectionsStatics
set SLv.BM2 to 29.0 ; lowVLOD "Turns on water reflections
set SLv.BM3 to 1.0 ; maxVAL for Static objects (buildings
set SLv.BM4 to 0.0 ; minVAL etc)"
;-----------------------------------------------------------------------------------
set SLv.BN0 to 1.0 ; Enable?
set SLv.BN1 to 40.0 ; highVLOD - bUseWaterReflectionsTrees
set SLv.BN2 to 39.0 ; lowVLOD "Turns on water reflections
set SLv.BN3 to 1.0 ; maxVAL for Trees"
set SLv.BN4 to 0.0 ; minVAL
;-----------------------------------------------------------------------------------
set SLv.BO0 to 1.0 ; Enable?
set SLv.BO1 to 50.0 ; highVLOD - bUseWaterReflectionsActors
set SLv.BO2 to 49.0 ; lowVLOD "Turns on water reflections
set SLv.BO3 to 1.0 ; maxVAL for actors (NPCs, monsters)"
set SLv.BO4 to 0.0 ; minVAL
;-----------------------------------------------------------------------------------


;===================================================================================
; [streamline Startup Code] *** DO NOT EDIT THIS SECTION ***
;===================================================================================
StartQuest SLini2

sycNiceToMeetYou:

  Reveal hidden contents

sycNiceToMeetYou.ini
; =====================
;
; Version: 1.13
; Author: Syclonix
; See More Mods by Syclonix:
; http://www.tesnexus.com/modules/members/index.php?id=59982

; Instructions
; ------------
; These settings are pre-configured for the best gameplay experience. If you would like to configure
; your own settings, read the descriptions provided and change the values of the variables
; accordingly. Unless otherwise specified, a value of "1" means Enable and a value of "0" means
; Disable. Note that the Default/Recommended values are listed to the right for your convenience.

; Hide NPC Names
; --------------
; Sets whether to completely hide the names of NPC's you haven't met yet. Enable this option if want
; the game to be more realistic and/or difficult.

set sycNTMYQuest.sHideAllUnknownNPCsNames to 0 ; Default 0

; NPC Name Retention
; ------------------
; fDaysToForget sets how many days the player will remember an NPC's name for without talking to him
; again. Set this to "0" to never forget an NPC's name after you meet him.
; sNumTimesToMemorize set how many times the player needs to talk to the NPC before permanently
; remembering his name.

set sycNTMYQuest.fDaysToForget to 7 ; Default 7
set sycNTMYQuest.sNumTimesToMemorize to 3 ; Default 3

; Dead NPC Settings
; -----------------
; Set the method for identifying unknown dead NPCs.
; 0 = Disable identification. Unknown dead NPCs' real names will not be shown.
; 1 = Identify on Hovering Body with Crosshair
; 2 = Identify on Searching Body
; 3 = Identify on Hovering Body with Crosshair or on Searching Body
; 4 = Identify All Bodies Automatically

set sycNTMYQuest.sIDDeadMethod to 3 ; Default 3
set sycNTMYQuest.fHoverTimer to 0.75 ; Default 0.75

; NPCs You Haven't Met
; --------------------
; These settings determine how NPCs you haven't met yet are labeled. You can choose to show the
; NPC's Name, Faction, Faction Rank, Race, Class, and/or Services. I recommend showing just their
; Race and Class.

set sycNTMYQuest.sShowUnknownNPCsName to 0 ; Default 0
set sycNTMYQuest.sShowUnknownNPCsFaction to 0 ; Default 0
set sycNTMYQuest.sShowUnknownNPCsRank to 0 ; Default 0
set sycNTMYQuest.sShowUnknownNPCsRace to 1 ; Default 1
set sycNTMYQuest.sShowUnknownNPCsClass to 1 ; Default 1
set sycNTMYQuest.sShowUnknownNPCsServices to 0 ; Default 0

; Same-Faction NPCs You Haven't Met
; ---------------------------------
; These settings determine how NPCs that are in the same faction as you, but that you haven't met
; yet are labeled. I recommend showing their Faction, Class, and Services offered.

set sycNTMYQuest.sShowUnknownFactionNPCsName to 0 ; Default 0
set sycNTMYQuest.sShowUnknownFactionNPCsFaction to 1 ; Default 1
set sycNTMYQuest.sShowUnknownFactionNPCsRank to 0 ; Default 0
set sycNTMYQuest.sShowUnknownFactionNPCsRace to 0 ; Default 0
set sycNTMYQuest.sShowUnknownFactionNPCsClass to 1 ; Default 1
set sycNTMYQuest.sShowUnknownFactionNPCsServices to 1 ; Default 1

; NPCs You've Met
; ---------------
; These settings determine how NPCs that you've met are labeled. I recommend showing their Name,
; Class, and Services offered.

set sycNTMYQuest.sShowKnownNPCsName to 1 ; Default 1
set sycNTMYQuest.sShowKnownNPCsFaction to 0 ; Default 0
set sycNTMYQuest.sShowKnownNPCsRank to 0 ; Default 0
set sycNTMYQuest.sShowKnownNPCsRace to 0 ; Default 0
set sycNTMYQuest.sShowKnownNPCsClass to 1 ; Default 1
set sycNTMYQuest.sShowKnownNPCsServices to 1 ; Default 1

; Same-Faction NPCs You've Met
; ----------------------------
; These settings determine how NPCs that are in the same faction as you, and that you've met are
; labeled. I recommend showing their Name, Faction, Class, and Services offered.

set sycNTMYQuest.sShowKnownFactionNPCsName to 1 ; Default 1
set sycNTMYQuest.sShowKnownFactionNPCsFaction to 1 ; Default 1
set sycNTMYQuest.sShowKnownFactionNPCsRank to 0 ; Default 0
set sycNTMYQuest.sShowKnownFactionNPCsRace to 0 ; Default 0
set sycNTMYQuest.sShowKnownFactionNPCsClass to 1 ; Default 1
set sycNTMYQuest.sShowKnownFactionNPCsServices to 1 ; Default 1

; Show Factions
; -------------
; Choose whether to allow Player Factions from other mods to be shown. If you have a Companion NPC
; mod installed you may want to disable this option.

set sycNTMYQuest.sShowModPlayerFactions to 1 ; Default 1

; Show Classes
; ------------
; Choose which Classes will be displayed. Only applicable if you enabled to show Classes for the
; particular group of NPCs. Note that if you choose to hide any classes you should have another noun
; like Name, Rank, or Race enabled. Otherwise you might end up with some funny sounding names.
; sShowHostileClasses will show classes like "Bandit" and "Marauder".
; sShowCovertClasses will show classes like "Assassin" and "Thief".
; sShowModClasses will allow user-created classes from other mods to be displayed.

set sycNTMYQuest.sShowHostileClasses to 1 ; Default 1
set sycNTMYQuest.sShowCovertClasses to 0 ; Default 0
set sycNTMYQuest.sShowModClasses to 1 ; Default 1

; Show Services
; -------------
; Choose which services will be displayed. Only applicable if you enabled to show Services for the
; particular group of NPCs.

set sycNTMYQuest.sShowMerchants to 1 ; Default 1
set sycNTMYQuest.sShowTrainers to 1 ; Default 1
set sycNTMYQuest.sShowArmorers to 1 ; Default 1
set sycNTMYQuest.sShowRechargers to 1 ; Default 1

; Generically Named NPCs
; ----------------------
; For generically named NPCs (i.e. "Adoring Fan", "Adventurer", or "Marauder"), choose whether to
; hide their generic names until you meet/identify them. Otherwise their generic name will always be
; shown.

sycNTMYQuest.sHideHostileNPCNames to 1 ; Default 1
sycNTMYQuest.sHideCovertNPCNames to 1 ; Default 1
sycNTMYQuest.sHideVampireNPCNames to 1 ; Default 1

; Name Formatting
; ---------------
; Choose how NPCs' names will be formatted and displayed in-game. Options can be mixed and matched.
; sNameFormatLineBreak1 makes the NPC's Name and Faction/Rank/Class/Race appear on separate lines.
; sNameFormatLineBreak2 makes the NPC's Services appear on a separate line.
; sNameFormatComma puts a "," after the NPC's name, if applicable (i.e. Edward Bantien, Thief).
; sNameFormatArticle puts a article after the NPC's name (i.e. Edward Bantien the Thief).
; sNameFormatParentheses places the NPC's Faction/Rank/Class/Race in parenthese.

set sycNTMYQuest.sNameFormatLineBreak1 to 0 ; Default 0
set sycNTMYQuest.sNameFormatLineBreak2 to 1 ; Default 1
set sycNTMYQuest.sNameFormatComma to 1 ; Default 1
set sycNTMYQuest.sNameFormatArticle to 1 ; Default 1
set sycNTMYQuest.sNameFormatParentheses to 0 ; Default 0

; Misc Settings
; -------------
; This set how often new NPCs are checked for, in seconds. You can set this to a lower value if you
; notice NPCs are not being renamed quickly enough.

set sycNTMYQuest.fRefWalkTimer to 1.5 ; Default 1.5

 

 

Edited August 16, 2015 by darkstar0303

[darkstar0303]

~snipped~

Edited August 17, 2015 by darkstar0303

[shinobi2008]

Drop keychain mod... DarkUI will provide the same feature. Drop Oblivion Script Optimization... it's outdated and will only make the game unstable. At least that's what majority of the modding community came to conclusion. If all else fails, revert to vanilla and then install the mods slowly testing the game as you go. BTW are you using BOSS or LOOT?

[Striker879]

All that and no bashed patch?? That will not give you a very good chance to succeed.

[darkstar0303]

  On 8/17/2015 at 12:33 PM, Striker879 said:

All that and no bashed patch?? That will not give you a very good chance to succeed.

The bashed patch had crashed me. Also I solved it Turned out the problem was the obse_jai_fix file. Everything is working now

[darkstar0303]

  On 8/17/2015 at 3:27 AM, shinobi2008 said:

Drop keychain mod... DarkUI will provide the same feature. Drop Oblivion Script Optimization... it's outdated and will only make the game unstable. At least that's what majority of the modding community came to conclusion. If all else fails, revert to vanilla and then install the mods slowly testing the game as you go. BTW are you using BOSS or LOOT?

Already fixed it. was just a obse plugin conflicting with a mod when i started through obse

[45AARP]

FCOM will not work correctly without a bashed patch. It may seem like it's working but you'll have a very small fraction of the content with a very small fraction of the stability. If you want it to work right you'll need to sit down for a few minutes and learn the basics of using Wrye Bash and it's Bashed Patch feature.