Jump to content

Mouse Y Axis


cregor

Recommended Posts

Ok I have done my due diligence on research and found the following fixes that helped out tremendously, but its still broke as all ****.

 

My first problem was "mouse lag", I was able to fix this by turning off the vertical sync by adding the following line to my ini file:

iPresentInterval=0

 

My second problem was "mouse stuttering", I was able to fix this by turning off Mouse Smoothing or Acceleration by changing the following line in my ini file:

bMouseAcceleration=0

 

My third problem is the infamous "Y axis sensitivity", Everyone recommends adding the following change to the ini file:

fMouseHeadingYScale=0.0200

fMouseHeadingXScale=0.0200

 

They then recommending lowering (yes this seems backwards) the fMouseHeadingYScale until it fixes the Y axis sensitivity. Some of the numbers I have seen are

fMouseHeadingYScale=0.0140

or

fMouseHeadingYScale=0.0100

 

I kept tweaking the YScale down and it seemed to get better to a point, but now no matter how long I make the Y scale it doesn't help, here are my current settings:

fMouseHeadingYScale=0.00005

fMouseHeadingXScale=0.0200

 

Any help is greatly appreciated, my game is unplayable at this point and Bethesda hasn't responded to my plea for help.

Link to comment
Share on other sites

  • 4 months later...

My third problem is the infamous "Y axis sensitivity", Everyone recommends adding the following change to the ini file:

fMouseHeadingYScale=0.0200

fMouseHeadingXScale=0.0200

 

They then recommending lowering (yes this seems backwards) the fMouseHeadingYScale until it fixes the Y axis sensitivity. Some of the numbers I have seen are

fMouseHeadingYScale=0.0140

or

fMouseHeadingYScale=0.0100

 

I kept tweaking the YScale down and it seemed to get better to a point, but now no matter how long I make the Y scale it doesn't help, here are my current settings:

fMouseHeadingYScale=0.00005

fMouseHeadingXScale=0.0200

 

Any help is greatly appreciated, my game is unplayable at this point and Bethesda hasn't responded to my plea for help.

I have the same problem aswell, though it only appeared after patching to 1.5

I know I probably shouldn't be necromancing such an old thread, but he summed up my problem perfectly

Thanks in advance for your help

 

edit: I just made the test and it actually takes me almost 8 meters to turn 180 degrees on the y-axis whereas it only takes me 10 to 15 cm to turn 180 degrees on the x-axis

the game is really unplayable like this

and I guess it's not a mouse problem as the mouse works perfectly fine in the menu/the rest of the games etc.

Edited by oberelchi
Link to comment
Share on other sites

The mouse Y axis is tied to the frame rate. The better the system you play it on the worse your "Y" gets. 11 things you can try;

 

10 : Make sure Vertical Sync is off for your game/graphic card

01 : Turn off all Mouse Accelleration or Mouse Smoothing (Control panel - mouse)

11 : http://skyrim.nexusmods.com/downloads/file.php?id=34 < ----- this is a frame rate limiter

 

 

You might only need to try the first two. If they don't work, try the third one. You shouldn't have to adjust the mouse through the ini file.

Edited by Brandy_123
Link to comment
Share on other sites

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...