blubbi321 Posted December 31, 2011 Share Posted December 31, 2011 I've run into a bit of a snag. Hoping ya'll might be able to help me out with this. I'm still working on the lower level for Proudspire and what I'm working on is opening the room up. Getting rid of all the Pillars along the center of the room going from the stairs to the door. This I've done easily as well as filling in the floor and replacing most of the main supports. My issue is I can't find a Single Column Arch in the codes. I've found the 2-3 & 4 corner supports but I can't seem to find the code for a single corner. This is keeping me from being able finnish out the room properly. Sadly I'm kinda anal about this sort of thing so I can't move onto my next project until this is resolved. p.s. Xazor for that Skyforge there set scale to .80 x pos to 60.25 & y pos to -615 it'll line up nice and flush and won't be too large. Remember to place another one on it and disable the original once you're done to avoid activation conflict. I only know because I have my forge in exacitally the same place. I found this as a single column for a corner in Solitude - 5B385 - Large Corner Rounded Archway. Hope it helps. Also can you put up the codes for what you've found? ThanksI already renovated Breezehome solitude style and made screenshots of all elements used for Solitude interior. I uploaded the files here at skyrimnexus http://www.skyrimnexus.com/downloads/file.php?id=3245 I hope it helps ;) Link to comment Share on other sites More sharing options...
jeremy92192 Posted December 31, 2011 Share Posted December 31, 2011 Hey guys, I gotta question. I've been adding on rooms and renovating my house with the console for the past couple of days. I was wonder if there was any way possible to somehow extract my new house and make it into a mod that can be turned on and off in the mod manager? I realize it's probably not possible as of now, but was wondering if this is possible to do when the creation kit comes out in January. I've never used the construction set before so forgive me for being a noob. I love my new creation so much and would love to have it on several saves. Link to comment Share on other sites More sharing options...
fjrz Posted January 1, 2012 Share Posted January 1, 2012 I read through the whole thread :-x anyways I'm enjoying myself moving stuff and making new rooms etc so I am ever grateful to the op and all who helped add to this ^.^ . In regards to the mannaquines, I am not sure of this myself and I am not too fluent in the console (yet) to figure this out but has anyone working on it tried adding them to a specific faction? I won't be surprised if there was a faction dialog for the mannaquines as there is when you force an npc to follow you or to marry etc. Just a heads up to something that might work, thanks again and happy modding ^.^ happy new year also. Link to comment Share on other sites More sharing options...
Talchia Posted January 2, 2012 Share Posted January 2, 2012 (edited) Great thread, I'm running around in the game just looking what I could add to my house :whistling: . Today I added the mara statue (000E3FC7) and noticed that the alchemy table would fit right in and so the Maralchemy table war born:http://www8.pic-upload.de/thumb/02.01.12/wb3xeoynvxe.jpg Now I'm searching for the evil enchanter counterpart. Edited January 2, 2012 by Talchia Link to comment Share on other sites More sharing options...
Deleted252610User Posted January 2, 2012 Share Posted January 2, 2012 (edited) Hello and thank you for this thread and the video tutorial.. I finally found a little house to use for my beginning characters.. Mixwater Mill , Worker's house. Nothing is owned inside. http://www.uesp.net/wiki/Skyrim:Mixwater_Mill coc MixwaterMillGilfresHouse --->>might have to run out if she is in there.and I believe MixwaterMillWorkersHouse --->>>> not tested yet My stuff is not all perfectly level but good enough for me until I can get my hands on the Construction Set to redo this house and possibly make a way to buy it from the current owner.. Locationhttp://www.witchqueensia.com/gallery/d/58128-1/ScreenShot379.jpg http://www.witchqueensia.com/gallery/d/58131-1/ScreenShot357.jpg The house is a mess. I deleted and picked up a LOT of stuff..Then began to add things using player.placeatme command. Saving first and reloading when I wasn't happy. http://www.witchqueensia.com/gallery/d/58134-1/ScreenShot362.jpg http://www.witchqueensia.com/gallery/d/58137-1/ScreenShot363.jpg http://www.witchqueensia.com/gallery/d/58140-1/ScreenShot364.jpg http://www.witchqueensia.com/gallery/d/58143-1/ScreenShot365.jpg http://www.witchqueensia.com/gallery/d/58146-1/ScreenShot366.jpg http://www.witchqueensia.com/gallery/d/58149-1/ScreenShot367.jpg http://www.witchqueensia.com/gallery/d/58152-1/ScreenShot369.jpg http://www.witchqueensia.com/gallery/d/58155-1/ScreenShot370.jpg http://www.witchqueensia.com/gallery/d/58158-1/ScreenShot371.jpg http://www.witchqueensia.com/gallery/d/58161-1/ScreenShot372.jpg I wound up putting a smelter out there too. http://www.witchqueensia.com/gallery/d/58164-1/ScreenShot373.jpg View from front porch http://www.witchqueensia.com/gallery/d/58167-1/ScreenShot374.jpg I just need a couple of codes and I'm finished..Also after reading all 58 pages of this topic I only saw one person postedthey had placed a campfire.. I need a fireplace fire.. I suppose campfire would work too.I can not find the codes for that anywhere.. I would like to place some of those lanterns inside too .. Maybe outside on the porch as well..Some light and a fireplace fire.. http://www.witchqueensia.com/gallery/d/58170-1/ScreenShot361.jpg http://www.witchqueensia.com/gallery/d/58173-1/ScreenShot375.jpg I wound up using this cook pot but now I need the frame it hangs from.. http://www.witchqueensia.com/gallery/d/58176-1/ScreenShot390.jpg I have attempted to get the id's of the items I need.. Except I don't have the wire frame needed above.. 000E5B8F ---fireplace fire000EF220 ---Lantern000E5B97 ---Logs beside fire (unlit static logs)000DB56B ---campfire Thank you very much.. It was fun doing this in game -s- -edit-clarity.. I need the code also for the wire frame for that hanging pot ..-s- Thanks. Edited January 2, 2012 by Guest Link to comment Share on other sites More sharing options...
KingShadowSkull Posted January 2, 2012 Share Posted January 2, 2012 Several people have said that they have added basements to Proudspire Manor, but no one has posted the ids of the stairway segments used in that house. I've been digging through the lists in tessnip and on the site for two hours, and still can't find the Proudspire stairway ids. Specifically, the stairs already used on the first three floors of the house. If anyone in this thread has the ids saved somewhere, or knows a better search string than "stair" to try and find them, I'd greatly appreciate the help. Turns out the section I was looking for isn't labeled as stairs at all. Manually searching through through all the solitude house items eventually led to the stairs. For anyone searching the thread in the future, the id of the stairs/stairwell with 3 floors/landings in Proudspire Manor is 57A1A and it's labeled as SMDAFloSol01. Searching for SMd returns most of the floor, wall, and archway textures used in the house. I could hug you, but i wont, i am so happy you posted the id, i really wanted to find this for my new mansion, bro you freaking rock! Link to comment Share on other sites More sharing options...
kastansa Posted January 2, 2012 Share Posted January 2, 2012 After 3 days my kitchen is finally finished. Please check out my video. I've time lapsed it into a few minutes. Feedback welcome. Cheers. http://www.youtube.com/watch?v=V-oXgF2aVSQ Link to comment Share on other sites More sharing options...
Shawkab Posted January 2, 2012 Author Share Posted January 2, 2012 Nice kastansa Link to comment Share on other sites More sharing options...
babsik Posted January 2, 2012 Share Posted January 2, 2012 (edited) Those IDs i got from here: http://fusromod.com/formids.php?idpage=static I use that site a bit (more than FNVEdit - which is only really used when I can't find an ID on that website). Use your browser search to search the page for say 'shelf'. The navigation on the top-right of that site are decorative IDs, which you will probably use more than the other stuff on the left. If the owner of FusRoMod.com is reading this, please please please make a search facility for your site!!! You would be my hero! ;) hi - i must have overlooked something - i searched almost every id list of that site for shelves etc. and tried them ingame but could not find any open shelves - still i thank you for the id's! the owner/maker of fusromod can be contacted via email as i saw - when i found this thread i was one second away of asking him for the selfid's Edited January 2, 2012 by babsik Link to comment Share on other sites More sharing options...
babsik Posted January 2, 2012 Share Posted January 2, 2012 Here's a list of shelving, which seems to be otherwise hard to find. Most of these were found via FusRoMod's code list, in the Static section thank you for this massive list of shelfid's - that's just what i needed :) Link to comment Share on other sites More sharing options...
Recommended Posts