danwillysxi Posted September 28, 2016 Share Posted September 28, 2016 Hello! so please can you help me out by looking at the below images. I'm pretty sure a mod is causing these issues but I have so many installed and I cannot always replicate the issue troubleshooting is a real pain is the ***! 1. A large black 'wall' randomly appears in outside areas: http://imgur.com/a/kTHBo 2. Internal walls/ceilings are bright white missing all textures: http://imgur.com/a/KYCTJ 3. My installed mods list: http://imgur.com/a/bzPwz If anyone can help I will be your best friend forever :) Link to comment Share on other sites More sharing options...
Mavkiel Posted September 28, 2016 Share Posted September 28, 2016 Try adding in the fallout 4 ini file, under general, bUseCombinedObjects=0 You may already have it with a value of 1, if so just change it to 0. It will get rid of the white missing textures, probably. Link to comment Share on other sites More sharing options...
Slostenn Posted September 29, 2016 Share Posted September 29, 2016 (edited) The "wall" looks like a case of artifacting, which can be caused by a variety of issues with your GPU, the most common of which I believe are that it's not receiving enough power or it's overheating. There are other causes, but I'd check for both of those first. As for the walls & ceilings missing textures, that's usually caused by conflicting cell edits in my experience, but as far as I know the only mod in your list that should be editing interior cells is Fr4nnson's Light Tweaks, which definitely wouldn't be causing that by itself. UseCombinedObjects shouldn't have any affect on that, and I wouldn't recommend disabling it unless you install a mod that requires you to since disabling it has a pretty hefty performance impact. Edit: actually, Fr4nnson's doesn't even edit any cells, so I'm not sure what's causing that. Is it happening in all interiors, or only specific examples? If the latter, which ones? Edited September 29, 2016 by Tukster Link to comment Share on other sites More sharing options...
muckfinger Posted September 29, 2016 Share Posted September 29, 2016 I'm not sure if it's the same problem, but I had a similar issue to the bright white missing texture in my own mod in an edited interior. It turned out it was a problem with room bounds. In game when looking in the direction of the box without a portal, I would see a blinding white light and all the textures would be gone in that direction. As Tukster asked, is it happening in all cells or just particular ones and vanilla cells or custom/edited cells? Link to comment Share on other sites More sharing options...
danwillysxi Posted September 29, 2016 Author Share Posted September 29, 2016 (edited) Thanks all :smile: your help is much appreciated. So last night I did manage to figure out what was causing the white walls/ceiling issue. It was 'HD reworked Project Revised'. Came across the issue in no particular building so made a save quit out and deactivated a few modes, loaded in and it was gone. Activated mods one by one until it appeared again. To test the theory I quit out and loaded in several times with the mod activated then deactivated and replicated the issue each time so I'm confident this is the problem. Actually in hindsight looking at the bugs section of that mod there is quite a few unresolved issues dating back several months. The black 'walls' I have not come across since deactivating 'HD Reworked Project revised' so i hope (fingers crossed) it was also to blame for this issue. Edited September 29, 2016 by danwillysxi Link to comment Share on other sites More sharing options...
Recommended Posts