MaGlas Posted January 13, 2012 Share Posted January 13, 2012 Hey guys!! I wanted to add a new shield with Skyedit. But ingame if I equip it, I see nothing from that shild, it is invisible. When I replace the meshes and the textures by exsample from the imperial shild, the shild is shown ingame. http://www.skyrimnexus.com/imageshare/images/2073189-1323379327.jpg Link to comment Share on other sites More sharing options...
Tivoko Posted January 24, 2012 Share Posted January 24, 2012 I'm having similar issues. When I made my new custom shield it did not display in the inventory window or on the ground when I dropped it, but when equipped it displayed normally. When I use the same mesh/textures to replace an existing shield (for example Spellbreaker) then it works just fine. Any help would be appreciated. Link to comment Share on other sites More sharing options...
Ashfyr Posted January 24, 2012 Share Posted January 24, 2012 The problem is for some reason Skyedit cannot do ground models right. Use tesnip or TesVSnip to fix the problem. I could do it rather quickly for you as well if you upload the esp and desired mesh paths =) Link to comment Share on other sites More sharing options...
Tivoko Posted January 24, 2012 Share Posted January 24, 2012 The problem is for some reason Skyedit cannot do ground models right. Use tesnip or TesVSnip to fix the problem. I could do it rather quickly for you as well if you upload the esp and desired mesh paths =)Thanks for the info! Grabbed TesVSnip and fixed the issue in less than a minute. :laugh: That was surprisingly easy. Link to comment Share on other sites More sharing options...
Recommended Posts