Jump to content

ENB Problem

Hmangaihsanga

By Hmangaihsanga
in Skyrim LE

 Share

Recommended Posts

Hmangaihsanga Rookie

Hmangaihsanga

Posted
Posted

Hello Guys,

 

I'm a bit new to the community and started modding skyrim only recently despite of having it for a long time, and I see many forums and topics where people post problems and get help fixing their problems, These posts have been very helpful to me. Now i'm trying to use ENB, I set up the files in the correct way that is explained and did nothing more. I get a long startup black screen but it eventually loads, then i load a saved game, the loading screen persists, even when it is ingame, i can hear the sounds, see HUDs and the compass turns around when I do. The problem is the loading screen persisting, and if I stay inside a small enclosed area like a tavern or home, after a few minutes, the game gets visualized but is all in sepia and the FPS drops heavily. Please help me, I dont know if either I did anything wrong or my system just cant handle ENB.

 

Specs are:

 

Intel core i5

Nvidia 940m

8gb ram

graphical memory 4017 mb

 

 

Link to comment
Share on other sites
Eimernase Explorer

Eimernase

Posted
Posted

your system can handle skyrim with an enb, not at very high setting, but with mid settings for sure.
I have a similar rig (Nvidia 840M) and can play well with enb and around 100 active mods.

Firstly, did you see at the start screen at left corner above that enb is load?
If not, check your enb-install again (also settings at skyrim/skyrimprefs.ini if your used enb are needed to changed there)
If you get the message, check the page from your used enb, which other mods are required for it and look if you have it installed in the correct order.
Check also your driver settings (Nvidia) and games settings, enb needs to take off AA/AF as example.

If all goes well here, it could be your used enb. Not all enb can be run with lower system specs, some requires higher specs.

Link to comment
Share on other sites
Hmangaihsanga Rookie

Hmangaihsanga

Posted
  • Author
Posted

your system can handle skyrim with an enb, not at very high setting, but with mid settings for sure.

I have a similar rig (Nvidia 840M) and can play well with enb and around 100 active mods.

 

Firstly, did you see at the start screen at left corner above that enb is load?

If not, check your enb-install again (also settings at skyrim/skyrimprefs.ini if your used enb are needed to changed there)

If you get the message, check the page from your used enb, which other mods are required for it and look if you have it installed in the correct order.

Check also your driver settings (Nvidia) and games settings, enb needs to take off AA/AF as example.

 

If all goes well here, it could be your used enb. Not all enb can be run with lower system specs, some requires higher specs.

 

When i get ingame it shows in the top left corner and while loading it says press shift+enter to go to settings , but i dont know what to do to fix it, AA/AF are also turned off, if I remembered it correctly in enbload virtualmemorysize=3807 is the correct number for me right? or Am i still doing it wrong. Please tell me how you do it if you use enb. I used a guide from here : http://www.nexusmods.com/skyrim/mods/54684/?tab=1&navtag=http%3A%2F%2Fwww.nexusmods.com%2Fskyrim%2Fajax%2Fmoddescription%2F%3Fid%3D54684%26preview%3D&pUp=1

Link to comment
Share on other sites
Eimernase Explorer

Eimernase

Posted
Posted (edited)

Your Enb is right installed if you see the text in the left top corner.

I can you only show my own settings, but that doesnt say it would fit yours well, because i use an older enb.

 

enblocal.ini
---------------
[GLOBAL]
UsePatchSpeedhackWithoutGraphics=false
UseDefferedRendering=true
IgnoreCreationKit=true

[PERFORMANCE]
SpeedHack=true
EnableOcclusionCulling=true

[MULTIHEAD]
ForceVideoAdapterIndex=false
VideoAdapterIndex=0

[MEMORY]
ExpandSystemMemoryX64=false
ReduceSystemMemoryUsage=true
DisableDriverMemoryManager=false
DisablePreloadToVRAM=false
EnableUnsafeMemoryHacks=false
ReservedMemorySizeMb=256
VideoMemorySizeMb=3714
EnableCompression=true
AutodetectVideoMemorySize=false

 

[ENGINE]
ForceAnisotropicFiltering=true
MaxAnisotropy=16
ForceLodBias=false
LodBias=0.0
AddDisplaySuperSamplingResolutions=false
EnableVSync=true
VSyncSkipNumFrames=0

 

check also proxy settings in your enblocal.ini, is there an dll-library set to load?
If so, the 1st two lines must be set as true, otherwise it cant load.
If the 3rd line at the PROXY is empty, fine, the 1st two lines should be set as false.

important settings are in skyrimprefs.ini as explained in your linked enb:

[Display]
------------------------------------
bFloatPointRenderTarget=1 (important! otherwise enb will not work)
bShadowsOnGrass=1
bTreesReceiveShadows=1
bDrawShadows=1

iMultisample=0 (Antialiasing)
iMaxAnisotropy=1 (Anisotropic Filtering) <--- i would set here a 0 instead of 1 to take AF off

Its also possible, that you need some updates for Directx 9.0c, because since Vista not all libraries are installed in a Win-System.
So just check this out http://www.microsoft.com/download/en/details.aspx?id=35


Edited by Eimernase
Link to comment
Share on other sites
Hmangaihsanga Rookie

Hmangaihsanga

Posted
  • Author
Posted

Your Enb is right installed if you see the text in the left top corner.

 

I can you only show my own settings, but that doesnt say it would fit yours well, because i use an older enb.

 

enblocal.ini

---------------

[GLOBAL]

UsePatchSpeedhackWithoutGraphics=false

UseDefferedRendering=true

IgnoreCreationKit=true

 

[PERFORMANCE]

SpeedHack=true

EnableOcclusionCulling=true

 

[MULTIHEAD]

ForceVideoAdapterIndex=false

VideoAdapterIndex=0

 

[MEMORY]

ExpandSystemMemoryX64=false

ReduceSystemMemoryUsage=true

DisableDriverMemoryManager=false

DisablePreloadToVRAM=false

EnableUnsafeMemoryHacks=false

ReservedMemorySizeMb=256

VideoMemorySizeMb=3714

EnableCompression=true

AutodetectVideoMemorySize=false

 

[ENGINE]

ForceAnisotropicFiltering=true

MaxAnisotropy=16

ForceLodBias=false

LodBias=0.0

AddDisplaySuperSamplingResolutions=false

EnableVSync=true

VSyncSkipNumFrames=0

 

check also proxy settings in your enblocal.ini, is there an dll-library set to load?

If so, the 1st two lines must be set as true, otherwise it cant load.

If the 3rd line at the PROXY is empty, fine, the 1st two lines should be set as false.

 

important settings are in skyrimprefs.ini as explained in your linked enb:

 

[Display]

------------------------------------

bFloatPointRenderTarget=1 (important! otherwise enb will not work)

bShadowsOnGrass=1

bTreesReceiveShadows=1

bDrawShadows=1

iMultisample=0 (Antialiasing)

iMaxAnisotropy=1 (Anisotropic Filtering) <--- i would set here a 0 instead of 1 to take AF off

 

Its also possible, that you need some updates for Directx 9.0c, because since Vista not all libraries are installed in a Win-System.

So just check this out http://www.microsoft.com/download/en/details.aspx?id=35

 

 

 

This is my unedited enblocal.ini:

 

[PROXY]
EnableProxyLibrary=false
InitProxyFunctions=false
ProxyLibrary=sweetfx_d3d9.dll
[GLOBAL]
UsePatchSpeedhackWithoutGraphics=false
UseDefferedRendering=true
ForceFakeVideocard=false
IgnoreCreationKit=true
[PERFORMANCE]
SpeedHack=true
EnableOcclusionCulling=false
[MULTIHEAD]
ForceVideoAdapterIndex=false
VideoAdapterIndex=0
[MEMORY]
ExpandSystemMemoryX64=true
ReduceSystemMemoryUsage=true
DisableDriverMemoryManager=false
DisablePreloadToVRAM=false
EnableUnsafeMemoryHacks=false
ReservedMemorySizeMb=512 //Raise or lower in increments of 128. The max is 1024, lowest possible value is 128
VideoMemorySizeMb=0 //change this based on your system, see guide on mod page or my tutorial video
EnableCompression=true
AutodetectVideoMemorySize=false
[WINDOW]
ForceBorderless=false
ForceBorderlessFullscreen=false
[ENGINE]
ForceAnisotropicFiltering=true
MaxAnisotropy=16
AddDisplaySuperSamplingResolutions=false
EnableVSync=true
VSyncSkipNumFrames=0
ForceLodBias=true
LodBias=0.16
[LIMITER]
WaitBusyRenderer=false
EnableFPSLimit=false
FPSLimit=60.0
[iNPUT]
//back
KeyReadConfig=8
//shift
KeyCombination=16
//f12
KeyUseEffect=123
//home
KeyFPSLimit=36
//num / 106
KeyShowFPS=106
//insert
KeyScreenshot=46
//enter
KeyEditor=13
KeyFreeVRAM=115
[ADAPTIVEQUALITY]
Enable=true
Quality=0
DesiredFPS=60.0
[ANTIALIASING]
EnableEdgeAA=true
EnableSubPixelAA=false
EnableTemporalAA=false
EnableTransparencyAA=false
[FIX]
FixParallaxBugs=true
ForceFakeVideocard=false
IgnoreLoadingScreen=true
IgnoreInventory=true
FixGameBugs=true
FixSsaoWaterTransparency=true
FixSsaoHairTransparency=true
FixTintGamma=false
RemoveBlur=false
IgnoreThreadPriority=false
FixSubSurfaceScattering=true
FixAliasedTextures=false
FixSkyReflection=true
FixCursorVisibility=true
FixParallaxTerrain=true
FixLag=false
[LONGEXPOSURE]
EnableLongExposureMode=false
Time=1.0
BlendMax=0.0
And here is my newly edited enblocal.ini:
[PROXY]
EnableProxyLibrary=true
InitProxyFunctions=true
ProxyLibrary=sweetfx_d3d9.dll
[GLOBAL]
UsePatchSpeedhackWithoutGraphics=false
UseDefferedRendering=true
ForceFakeVideocard=false
IgnoreCreationKit=true
[PERFORMANCE]
SpeedHack=true
EnableOcclusionCulling=true
[MULTIHEAD]
ForceVideoAdapterIndex=false
VideoAdapterIndex=0
[MEMORY]
ExpandSystemMemoryX64=false
ReduceSystemMemoryUsage=true
DisableDriverMemoryManager=false
DisablePreloadToVRAM=false
EnableUnsafeMemoryHacks=false
ReservedMemorySizeMb=512 //Raise or lower in increments of 128. The max is 1024, lowest possible value is 128
VideoMemorySizeMb=3807 //change this based on your system, see guide on mod page or my tutorial video
EnableCompression=true
AutodetectVideoMemorySize=false
[WINDOW]
ForceBorderless=false
ForceBorderlessFullscreen=false
[ENGINE]
ForceAnisotropicFiltering=true
MaxAnisotropy=16
AddDisplaySuperSamplingResolutions=false
EnableVSync=true
VSyncSkipNumFrames=0
ForceLodBias=true
LodBias=0.0
[LIMITER]
WaitBusyRenderer=false
EnableFPSLimit=false
FPSLimit=60.0
[iNPUT]
//back
KeyReadConfig=8
//shift
KeyCombination=16
//f12
KeyUseEffect=123
//home
KeyFPSLimit=36
//num / 106
KeyShowFPS=106
//insert
KeyScreenshot=46
//enter
KeyEditor=13
KeyFreeVRAM=115
[ADAPTIVEQUALITY]
Enable=true
Quality=0
DesiredFPS=60.0
[ANTIALIASING]
EnableEdgeAA=true
EnableSubPixelAA=false
EnableTemporalAA=false
EnableTransparencyAA=false
[FIX]
FixParallaxBugs=true
ForceFakeVideocard=false
IgnoreLoadingScreen=true
IgnoreInventory=true
FixGameBugs=true
FixSsaoWaterTransparency=true
FixSsaoHairTransparency=true
FixTintGamma=false
RemoveBlur=false
IgnoreThreadPriority=false
FixSubSurfaceScattering=true
FixAliasedTextures=false
FixSkyReflection=true
FixCursorVisibility=true
FixParallaxTerrain=true
FixLag=false
[LONGEXPOSURE]
EnableLongExposureMode=false
Time=1.0
BlendMax=0.0
I set the proxy to true but cant seem to find sweetfx_d3d9.dll anywhere on my downloads. Also I presume running the Enb injector before the game right? and i edited my enbinjector.ini to this:
[LIBRARY]
LibraryName=enbseries.dll
[TARGETPROCESS]
ProcessName0=skse_loader.exe
ProcessName1=SkyrimLauncher.exe
ProcessName2=tesv.exe
ProcessName3=
ProcessName4=
ProcessName5=
ProcessName6=
ProcessName7=
ProcessName8=
ProcessName9=
ProcessName10=
ProcessName11=
ProcessName12=
ProcessName13=
ProcessName14=
ProcessName15=
but with all due respect, now im getting unloadable skyrim, like, the launcher just opens a small window Skyrim(Not Responding) from the start.
Link to comment
Share on other sites
Hmangaihsanga Rookie

Hmangaihsanga

Posted
  • Author
Posted

 

Your Enb is right installed if you see the text in the left top corner.

 

I can you only show my own settings, but that doesnt say it would fit yours well, because i use an older enb.

 

enblocal.ini

---------------

[GLOBAL]

UsePatchSpeedhackWithoutGraphics=false

UseDefferedRendering=true

IgnoreCreationKit=true

 

[PERFORMANCE]

SpeedHack=true

EnableOcclusionCulling=true

 

[MULTIHEAD]

ForceVideoAdapterIndex=false

VideoAdapterIndex=0

 

[MEMORY]

ExpandSystemMemoryX64=false

ReduceSystemMemoryUsage=true

DisableDriverMemoryManager=false

DisablePreloadToVRAM=false

EnableUnsafeMemoryHacks=false

ReservedMemorySizeMb=256

VideoMemorySizeMb=3714

EnableCompression=true

AutodetectVideoMemorySize=false

 

[ENGINE]

ForceAnisotropicFiltering=true

MaxAnisotropy=16

ForceLodBias=false

LodBias=0.0

AddDisplaySuperSamplingResolutions=false

EnableVSync=true

VSyncSkipNumFrames=0

 

check also proxy settings in your enblocal.ini, is there an dll-library set to load?

If so, the 1st two lines must be set as true, otherwise it cant load.

If the 3rd line at the PROXY is empty, fine, the 1st two lines should be set as false.

 

important settings are in skyrimprefs.ini as explained in your linked enb:

 

[Display]

------------------------------------

bFloatPointRenderTarget=1 (important! otherwise enb will not work)

bShadowsOnGrass=1

bTreesReceiveShadows=1

bDrawShadows=1

iMultisample=0 (Antialiasing)

iMaxAnisotropy=1 (Anisotropic Filtering) <--- i would set here a 0 instead of 1 to take AF off

 

Its also possible, that you need some updates for Directx 9.0c, because since Vista not all libraries are installed in a Win-System.

So just check this out http://www.microsoft.com/download/en/details.aspx?id=35

 

 

 

This is my unedited enblocal.ini:

 

[PROXY]
EnableProxyLibrary=false
InitProxyFunctions=false
ProxyLibrary=sweetfx_d3d9.dll
[GLOBAL]
UsePatchSpeedhackWithoutGraphics=false
UseDefferedRendering=true
ForceFakeVideocard=false
IgnoreCreationKit=true
[PERFORMANCE]
SpeedHack=true
EnableOcclusionCulling=false
[MULTIHEAD]
ForceVideoAdapterIndex=false
VideoAdapterIndex=0
[MEMORY]
ExpandSystemMemoryX64=true
ReduceSystemMemoryUsage=true
DisableDriverMemoryManager=false
DisablePreloadToVRAM=false
EnableUnsafeMemoryHacks=false
ReservedMemorySizeMb=512 //Raise or lower in increments of 128. The max is 1024, lowest possible value is 128
VideoMemorySizeMb=0 //change this based on your system, see guide on mod page or my tutorial video
EnableCompression=true
AutodetectVideoMemorySize=false
[WINDOW]
ForceBorderless=false
ForceBorderlessFullscreen=false
[ENGINE]
ForceAnisotropicFiltering=true
MaxAnisotropy=16
AddDisplaySuperSamplingResolutions=false
EnableVSync=true
VSyncSkipNumFrames=0
ForceLodBias=true
LodBias=0.16
[LIMITER]
WaitBusyRenderer=false
EnableFPSLimit=false
FPSLimit=60.0
[iNPUT]
//back
KeyReadConfig=8
//shift
KeyCombination=16
//f12
KeyUseEffect=123
//home
KeyFPSLimit=36
//num / 106
KeyShowFPS=106
//insert
KeyScreenshot=46
//enter
KeyEditor=13
KeyFreeVRAM=115
[ADAPTIVEQUALITY]
Enable=true
Quality=0
DesiredFPS=60.0
[ANTIALIASING]
EnableEdgeAA=true
EnableSubPixelAA=false
EnableTemporalAA=false
EnableTransparencyAA=false
[FIX]
FixParallaxBugs=true
ForceFakeVideocard=false
IgnoreLoadingScreen=true
IgnoreInventory=true
FixGameBugs=true
FixSsaoWaterTransparency=true
FixSsaoHairTransparency=true
FixTintGamma=false
RemoveBlur=false
IgnoreThreadPriority=false
FixSubSurfaceScattering=true
FixAliasedTextures=false
FixSkyReflection=true
FixCursorVisibility=true
FixParallaxTerrain=true
FixLag=false
[LONGEXPOSURE]
EnableLongExposureMode=false
Time=1.0
BlendMax=0.0
And here is my newly edited enblocal.ini:
[PROXY]
EnableProxyLibrary=true
InitProxyFunctions=true
ProxyLibrary=sweetfx_d3d9.dll
[GLOBAL]
UsePatchSpeedhackWithoutGraphics=false
UseDefferedRendering=true
ForceFakeVideocard=false
IgnoreCreationKit=true
[PERFORMANCE]
SpeedHack=true
EnableOcclusionCulling=true
[MULTIHEAD]
ForceVideoAdapterIndex=false
VideoAdapterIndex=0
[MEMORY]
ExpandSystemMemoryX64=false
ReduceSystemMemoryUsage=true
DisableDriverMemoryManager=false
DisablePreloadToVRAM=false
EnableUnsafeMemoryHacks=false
ReservedMemorySizeMb=512 //Raise or lower in increments of 128. The max is 1024, lowest possible value is 128
VideoMemorySizeMb=3807 //change this based on your system, see guide on mod page or my tutorial video
EnableCompression=true
AutodetectVideoMemorySize=false
[WINDOW]
ForceBorderless=false
ForceBorderlessFullscreen=false
[ENGINE]
ForceAnisotropicFiltering=true
MaxAnisotropy=16
AddDisplaySuperSamplingResolutions=false
EnableVSync=true
VSyncSkipNumFrames=0
ForceLodBias=true
LodBias=0.0
[LIMITER]
WaitBusyRenderer=false
EnableFPSLimit=false
FPSLimit=60.0
[iNPUT]
//back
KeyReadConfig=8
//shift
KeyCombination=16
//f12
KeyUseEffect=123
//home
KeyFPSLimit=36
//num / 106
KeyShowFPS=106
//insert
KeyScreenshot=46
//enter
KeyEditor=13
KeyFreeVRAM=115
[ADAPTIVEQUALITY]
Enable=true
Quality=0
DesiredFPS=60.0
[ANTIALIASING]
EnableEdgeAA=true
EnableSubPixelAA=false
EnableTemporalAA=false
EnableTransparencyAA=false
[FIX]
FixParallaxBugs=true
ForceFakeVideocard=false
IgnoreLoadingScreen=true
IgnoreInventory=true
FixGameBugs=true
FixSsaoWaterTransparency=true
FixSsaoHairTransparency=true
FixTintGamma=false
RemoveBlur=false
IgnoreThreadPriority=false
FixSubSurfaceScattering=true
FixAliasedTextures=false
FixSkyReflection=true
FixCursorVisibility=true
FixParallaxTerrain=true
FixLag=false
[LONGEXPOSURE]
EnableLongExposureMode=false
Time=1.0
BlendMax=0.0
I set the proxy to true but cant seem to find sweetfx_d3d9.dll anywhere on my downloads. Also I presume running the Enb injector before the game right? and i edited my enbinjector.ini to this:
[LIBRARY]
LibraryName=enbseries.dll
[TARGETPROCESS]
ProcessName0=skse_loader.exe
ProcessName1=SkyrimLauncher.exe
ProcessName2=tesv.exe
ProcessName3=
ProcessName4=
ProcessName5=
ProcessName6=
ProcessName7=
ProcessName8=
ProcessName9=
ProcessName10=
ProcessName11=
ProcessName12=
ProcessName13=
ProcessName14=
ProcessName15=
but with all due respect, now im getting unloadable skyrim, like, the launcher just opens a small window Skyrim(Not Responding) from the start.

 

I'm a little dumb towards modding and especially ENBs so please bear with me.

Link to comment
Share on other sites
Lyrinthia Rookie

Lyrinthia

Posted
Posted

Hello, I'm having trouble with my ENB as well. it works fine but when I hover over an option in the in-game enbseries options menu, the screen dims and it shows info about the option on the top of the screen. Would you happen to know how to turn that off?

Link to comment
Share on other sites
Eimernase Explorer

Eimernase

Posted
Posted

 

[PROXY]

EnableProxyLibrary=true
InitProxyFunctions=true
ProxyLibrary=sweetfx_d3d9.dll

I set the proxy to true but cant seem to find sweetfx_d3d9.dll anywhere on my downloads.

 

Also I presume running the Enb injector before the game right? and i edited my enbinjector.ini to this:

[LIBRARY]
LibraryName=enbseries.dll
[TARGETPROCESS]
ProcessName0=skse_loader.exe
ProcessName1=SkyrimLauncher.exe
ProcessName2=tesv.exe
ProcessName3=
ProcessName4=
ProcessName5=
ProcessName6=
ProcessName7=
ProcessName8=
ProcessName9=
ProcessName10=
ProcessName11=
ProcessName12=
ProcessName13=
ProcessName14=
ProcessName15=
but with all due respect, now im getting unloadable skyrim, like, the launcher just opens a small window Skyrim(Not Responding) from the start.

 

You need only the proxy if your enb requires them. otherwise dont change it.

 

Enb comes always in 2 different ways, as wrapper or injector-version.

Pick 1 of them, but never both.

 

If you already have issues with them, i can just suggest to try another ENB-preset.

This what you posted before is more a guideance.

A serious ENB-preset have alot more information in his description, which mods are required/recommend, how install etc.

If they havent, dont touch this, especially you are new to this.

Link to comment
Share on other sites
Eimernase Explorer

Eimernase

Posted
Posted

Hello, I'm having trouble with my ENB as well. it works fine but when I hover over an option in the in-game enbseries options menu, the screen dims and it shows info about the option on the top of the screen. Would you happen to know how to turn that off?

If i understand you right, you want to take off the hover info and the dimming when you are in enb-menu?

Link to comment
Share on other sites
Hmangaihsanga Rookie

Hmangaihsanga

Posted
  • Author
Posted

Thank you sir,

 

 

 

[PROXY]
EnableProxyLibrary=true
InitProxyFunctions=true
ProxyLibrary=sweetfx_d3d9.dll

I set the proxy to true but cant seem to find sweetfx_d3d9.dll anywhere on my downloads.

Also I presume running the Enb injector before the game right? and i edited my enbinjector.ini to this:
[LIBRARY]
LibraryName=enbseries.dll
[TARGETPROCESS]
ProcessName0=skse_loader.exe
ProcessName1=SkyrimLauncher.exe
ProcessName2=tesv.exe
ProcessName3=
ProcessName4=
ProcessName5=
ProcessName6=
ProcessName7=
ProcessName8=
ProcessName9=
ProcessName10=
ProcessName11=
ProcessName12=
ProcessName13=
ProcessName14=
ProcessName15=
but with all due respect, now im getting unloadable skyrim, like, the launcher just opens a small window Skyrim(Not Responding) from the start.

 

You need only the proxy if your enb requires them. otherwise dont change it.

Enb comes always in 2 different ways, as wrapper or injector-version.
Pick 1 of them, but never both.

If you already have issues with them, i can just suggest to try another ENB-preset.
This what you posted before is more a guideance.
A serious ENB-preset have a lot more information in his description, which mods are required/recommend, how install etc.
If they havent, dont touch this, especially you are new to this.

 

Thank you sir, i will try to put in a better ENB which has much more info, I will try to contact you again and tell you of my result.

Link to comment
Share on other sites
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...