Jump to content

Mods suddenly not loading in-game

HEONilssen

By HEONilssen
in Skyrim LE

 Share

Recommended Posts

HEONilssen Rookie

HEONilssen

Posted
Posted (edited)

Edit: Problem solved! Enabled auto-ghost in Wrye Bash to remove all my disabled mods that were bloating my load order!

 

Hello

 

So after playing a Skyrim for a few hours, I turn off my computer, and the next day when loading up my save, none of the mods where loading. No esp. or esm. files where loading in game, altough mods affecting meshes and texture where working, as well as mods configuring SKSE, such as SkyUI.

 

I've located the problem to do with the SkyrimPrefs.ini, as I've seen similar symptoms before.

 

Note: I've been modding for quite some time. My SKyrim was modded and working perfectly, no hick-ups, the suddenly this happens.

I'm using the Nexus Mod Manager, altough I have installed MO just to check it out, but I'm not using it. Installing MO did not kill my game, as this was weeks ago. I am aware that MO uses it's own SkyrimPrefs.ini, and I've made sure that the line bEnableFileSelection=1. I've tried to toogle SkyrimPrefs.ini with read-only enabled and disabled, makes no difference.

 

I've tired to uncheck read-only the skyrim folder in C:\Program Files (x86)\Steam\SteamApps\common, but to no avail, it re-checks itself after everytime I try. Disabling UAC doesn't change that, so there's no way around it. Not sure if this is a major issue or not. Not even the skyrim folder in my other drive I have as a backup lets me un-check read-only, so not sure if that's the issue.

 

Specs:

 

  Reveal hidden contents

 

 

Load order:

  Reveal hidden contents

Note regarding my load order: Yes, it is indeed a mad amount of mods in a game. Yes I have a problem. But it worked fine, so it can't be the mods (direct) fault. Disabled the patches at the bottom since patchusmaximus made my game CTD. I disabled it and the other patches, and game's been running just fine since. Been coming around to fix that in the future. Also, I've merged a few armor mods and immersion mods togheter, as well as eyes, brows warpaints and the like togheter. Probably why patchusmaximus doesn't work, but that's not the cause of my problems here.
Just ran LOOT after uploading my load order, didn't fix the problem.
I've run NMM, LOOT, SKSE as administrator, nothing worked. Reinstalling mods in NMM didn't make them appear in-game. Revalidate game files in steam didn't work. Running the skyrim launcher nor the SKSE trough steam worked either. I can't imagine why reinstalling the whole game would fix anything, so haven't tried that yet, but that's my last resort unless anyone here has a better idea.
I'm at my limit here guys, I've no idea what to do. If you got any ideas, please do help. Sorry for bad English, not my language. Been on the nexus for ages, and since this is my first troubleshoot ever, you can get the idea that I'm waist high in despair.
Lots of love <3
Edit: Added spoiler-funciton for spec and load order
Edit: SOLVED! Enabled auto-ghosting in Wrye Bash to fix all the disabled mods that bloated my load order
Edited by HEONilssen
Link to comment
Share on other sites
gromulos Veteran

gromulos

Posted
Posted

LOOT is not a fix all when it comes to load order, you are missing 2 parts of the equation if that's all you are using.

 

Do ALL of steps 2 & 3 and let me know what you find out please

 

https://forums.nexusmods.com/index.php?/topic/2235394-beginners-guide-to-modding/

Link to comment
Share on other sites
HEONilssen Rookie

HEONilssen

Posted
  • Author
Posted (edited)
  On 5/10/2017 at 12:59 PM, gromulos said:

LOOT is not a fix all when it comes to load order, you are missing 2 parts of the equation if that's all you are using.

 

Do ALL of steps 2 & 3 and let me know what you find out please

 

https://forums.nexusmods.com/index.php?/topic/2235394-beginners-guide-to-modding/

 

I did the steps. Haven't built a neat bashed patch with wrye bash before, but I've should've mentioned I've run it trough tess5edit earlier on. But still, doing your steps didn't fix it, sadly. But thanks for the tip :smile:

Edited by HEONilssen
Link to comment
Share on other sites
gromulos Veteran

gromulos

Posted
Posted

you should check your load order in wrye, as far as the amount of mods, there is a 255 cap built into the game, and some computers can't even run half that. While you may not be over the game limit, you may very well be over the limit for your own computer. my old computer could only handle 128 mods for FONV, at 129 or higher instant CTD every time, my new computer is currently running 184 for the same game, so it does vary from machine to machine.

Link to comment
Share on other sites
HEONilssen Rookie

HEONilssen

Posted
  • Author
Posted
  On 5/10/2017 at 10:15 PM, gromulos said:

you should check your load order in wrye, as far as the amount of mods, there is a 255 cap built into the game, and some computers can't even run half that. While you may not be over the game limit, you may very well be over the limit for your own computer. my old computer could only handle 128 mods for FONV, at 129 or higher instant CTD every time, my new computer is currently running 184 for the same game, so it does vary from machine to machine.

Hmm I'll try that next time, but don't you think it's strange that my game suddenly just stops loading mods altogheter like that? But what excactly happens when you surpass that 255 cap? Does your Skyrim just CTD on start or does nothing load at all, like my case right now? And again, thanks for the tip :) I'll let you know when I try it out ;)

Link to comment
Share on other sites
HEONilssen Rookie

HEONilssen

Posted
  • Author
Posted
  On 5/10/2017 at 10:15 PM, gromulos said:

you should check your load order in wrye, as far as the amount of mods, there is a 255 cap built into the game, and some computers can't even run half that. While you may not be over the game limit, you may very well be over the limit for your own computer. my old computer could only handle 128 mods for FONV, at 129 or higher instant CTD every time, my new computer is currently running 184 for the same game, so it does vary from machine to machine.

Well, I tried to disable, then uninstall quite a few mods, but nothing changed. My Skyrim still appears as there's no mods installed at all, except for the ones editing textures/meshes. But thanks for the tip :)

Link to comment
Share on other sites
gromulos Veteran

gromulos

Posted
Posted

Check all of your INI's and make sure they are not read only, if they are then the game can not write the mods to a couple of them upon startup

 

Location would be where ever the game EXE is AND the folder in Documents also

 

C:\Users\Users name\Documents\My Games

Link to comment
Share on other sites
HEONilssen Rookie

HEONilssen

Posted
  • Author
Posted
  On 5/13/2017 at 12:56 PM, gromulos said:

Check all of your INI's and make sure they are not read only, if they are then the game can not write the mods to a couple of them upon startup

 

Location would be where ever the game EXE is AND the folder in Documents also

 

C:\Users\Users name\Documents\My Games

 

Think I said that I did this in the original post, but no, this didn't help either. Thanks for trying, I really appreciate it :)

Link to comment
Share on other sites
gromulos Veteran

gromulos

Posted
Posted

at this point i think you are going to have to narrow it down. I think there may be 1 or 2 mods that could be causing the problem.

 

Read the thread below because it details what I think you need to do at this point, and it also proves that it works.

 

https://forums.nexusmods.com/index.php?/topic/5626502-ctd-after-2-min-t-t/

Link to comment
Share on other sites
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...