johndenver26 Posted February 21, 2012 Share Posted February 21, 2012 So, my PC runs Skyrim fine. I can play at 1920x1080 with medium-ish settings and get around 30 frames outdoors and 50+ indoors. And, when I enable any ENB configuration I only get about 3-5 frames less BUT Skyrim starts to crash about every 5 minutes and load times are very, very long. I really want to use ENB so I'm just wondering if there's anything I can do to make the game run better with ENB or if it has to do with my PC setup? My specs: AMD Athlon 64 X2 5200+4 GB RAMNvidia GTS 250 Link to comment Share on other sites More sharing options...
MacKom Posted February 21, 2012 Share Posted February 21, 2012 Ok, let`s try this... First, go have a look here - http://skyrim.nexusmods.com/downloads/file.php?id=4192This is THE best way to ensure you don`t get CTDs . Period. Then, there is the matter of different ENB settings. Which config are you using? If you are using one that uses SSAO/SSIL method, that might be it. Also, make sure to open your computer every now and then and clean it from dust and other dirt. You would be surprised how much good it actually does. I`m no computer expert (far from that) but it could be an overheating issue. So, update your drivers, clean your computer and try lowering your graphic settings. Start from there ;) Link to comment Share on other sites More sharing options...
johndenver26 Posted February 21, 2012 Author Share Posted February 21, 2012 (edited) Awesome, thank you for the help! Downloading that mod now. I'm using this config: http://skyrim.nexusmods.com/downloads/file.php?id=10614 It says SSAO is disabled so I don't think that is the problem. Also, I just had my computer cleaned about 2 weeks ago. For now I'll try to lower some settings and install that mod and see where that gets me. Thanks again! Edit: Actually, forgot to mention that I'm running Windows 7 64bit. So I guess that mod doesn't apply to me? :unsure: Edited February 21, 2012 by johndenver26 Link to comment Share on other sites More sharing options...
shadowfx78 Posted February 21, 2012 Share Posted February 21, 2012 I am having the same problem. my specs are a bit different thought AMD Phenom x4 3.2 ghz8 gb of ramATI radeon HD 5450 with 1 gb vramwindows 7 ultimate 64 edition Link to comment Share on other sites More sharing options...
MacKom Posted February 21, 2012 Share Posted February 21, 2012 Hm....well, in any case, I believe your best bet would be to go to official ENB forum and post your problems there. Boris is "floating" about, so you just might get some advice directly from him. Also, ATI users (like myself) lucked out - ENB was created with nVidia graphic cards in mind so...sucks to be us. 9____9 Link to comment Share on other sites More sharing options...
shadowfx78 Posted February 21, 2012 Share Posted February 21, 2012 Thanks Mackon for that link to the forum i posted there and am awaiting a reply. Link to comment Share on other sites More sharing options...
Recommended Posts