Skyrim SE Blacking Out and Closing Itself

[Kievawolf]

Skyrim SE is blacking out and closing a few seconds later when I go into certain areas. Among them are Pinewatch, when I walk into where the beginning of where the traps are past the Strong-Arm bandit; Kilkreath Ruins, the Old Hroldan Inn, and Kolskeggr Mine. It seems to only be after a certain amount of time/seconds, not when an event occurs. There has been twice where my game has crashed when I pulled the lever at bards leap and when I clicked on the door to wal into Hroldan Inn. Not only that but when they game closes steam tries to sync with my skyrim SE and never does, it constantly says 0% and I have to pretty much cancel it/force it to stop and close steam before I can start the game again.

It never gives me an error and it says all my mods are okay (Green BG with Green checkmarks exclding Skyrim, Hearthfire, Dawnguard, Dragonborn, and Update.esm which are blue.) on WryeBash except two and they are the RS Children mod and the RS Children Patch.

 

EDIT: I literally disabled all my mods through WryeBash and loaded into the game and suprisingly enough my game was able to load but it STILL had the same problem of going black and exiting the game when I went to pull the lever at the bards leap. So I'll assume that disabling all my mods did not fix my problem. Can anyone help please?

 

Here is my mod order/BOSS Report:

Dawnguard.esm

CRC: 051FCDC8

UDR: 139, ITM not scanned (via Wrye Bash)

HearthFires.esm

CRC: FBD3FB4C

UDR: 16, ITM not scanned (via Wrye Bash)

Dragonborn.esm

CRC: C7E30215

UDR: 9, ITM not scanned (via Wrye Bash)

unofficial skyrim special edition patch.esp

Version: 4.0.7

CRC: 8D0F9513

ApachiiHair.esm

CRC: 2949DB49

RSkyrimChildren.esm

CRC: 20B2EC32

NexusSkyrimOverhaul.esp

CRC: 8BBA04FE

immersive citizens - ai overhaul.esp

CRC: C3B6621E

Skyrim Flora Overhaul.esp

CRC: 3BD2CC4C

DiverseDragonsCollectionSE.esp

CRC: 1C009F92

skyBirds_SSE.esp

CRC: 9527827E

SkyTEST-RealisticAnimals&Predators.esp

CRC: A8E4B6A9

BirdsOfSkyrim_SSE.esp

CRC: ED2EA3B4

Khajiit_Eyes_Extended.esp

CRC: A2EC5923

ars metallica.esp

CRC: 80BA67DA

betaalphaknightlagrie.esp

CRC: 3ADC1100

Improved Adoptions.esp

CRC: 268D8582

Improved Adoptions DLC houses.esp

CRC: FD70CA9A

Improved Adoptions Patch.esp

CRC: A4BB0BDA

KhajiitChildren.esp

CRC: 02BFCEF2

1poundbones.esp

CRC: A97783D7

RSChildren - Complete.esp

CRC: 487C81EE

Ark_PantherCompanion.esp

CRC: D35DCB76

Dogs-of-Skyrim.esp

CRC: 5421CE6D

Cats-in-SkyrimSSE.esp

CRC: B4789717

RSChildren - ACK.esp

CRC: D6D2EC0D

RSChildren_PatchUSSEP.esp

CRC: BAB63695

moonpath.esp

CRC: 18577F3E

vivid weathersse.esp

CRC: 8C347010

Bashed Patch, 0.esp

CRC: D428DF0D

 

 

Can someone please help me? I will take the steps necissary to help diagnose the problem but I don't know how to figure the problem out. I've tried disabling all my mods and it didn't work no matter what I did. (Except Nexus Overhaul mod, because I didn't want to loose my savegame.)

Everytime I walk in somewhere I fear my game will shut off. I have no idea why. I run a MSI gaming computer with Windows 10.

Any help would be greatly appreciated. I attempted to put this in MOD help but now that I think of it I think it fits better here.

Edited June 30, 2017 by Kievawolf

[Reynard131]

Skyrim SE is blacking out and closing a few seconds later when I go into certain areas. Among them are Pinewatch, when I walk into where the beginning of where the traps are past the Strong-Arm bandit; Kilkreath Ruins, the Old Hroldan Inn, and Kolskeggr Mine. It seems to only be after a certain amount of time/seconds, not when an event occurs. There has been twice where my game has crashed when I pulled the lever at bards leap and when I clicked on the door to wal into Hroldan Inn. Not only that but when they game closes steam tries to sync with my skyrim SE and never does, it constantly says 0% and I have to pretty much cancel it/force it to stop and close steam before I can start the game again.

It never gives me an error and it says all my mods are okay (Green BG with Green checkmarks exclding Skyrim, Hearthfire, Dawnguard, Dragonborn, and Update.esm which are blue.) on WryeBash except two and they are the RS Children mod and the RS Children Patch.

 

EDIT: I literally disabled all my mods through WryeBash and loaded into the game and suprisingly enough my game was able to load but it STILL had the same problem of going black and exiting the game when I went to pull the lever at the bards leap. So I'll assume that disabling all my mods did not fix my problem. Can anyone help please?

 

Here is my mod order/BOSS Report:

Dawnguard.esm

CRC: 051FCDC8

UDR: 139, ITM not scanned (via Wrye Bash)

HearthFires.esm

CRC: FBD3FB4C

UDR: 16, ITM not scanned (via Wrye Bash)

Dragonborn.esm

CRC: C7E30215

UDR: 9, ITM not scanned (via Wrye Bash)

unofficial skyrim special edition patch.esp

Version: 4.0.7

CRC: 8D0F9513

ApachiiHair.esm

CRC: 2949DB49

RSkyrimChildren.esm

CRC: 20B2EC32

NexusSkyrimOverhaul.esp

CRC: 8BBA04FE

immersive citizens - ai overhaul.esp

CRC: C3B6621E

Skyrim Flora Overhaul.esp

CRC: 3BD2CC4C

DiverseDragonsCollectionSE.esp

CRC: 1C009F92

skyBirds_SSE.esp

CRC: 9527827E

SkyTEST-RealisticAnimals&Predators.esp

CRC: A8E4B6A9

BirdsOfSkyrim_SSE.esp

CRC: ED2EA3B4

Khajiit_Eyes_Extended.esp

CRC: A2EC5923

ars metallica.esp

CRC: 80BA67DA

betaalphaknightlagrie.esp

CRC: 3ADC1100

Improved Adoptions.esp

CRC: 268D8582

Improved Adoptions DLC houses.esp

CRC: FD70CA9A

Improved Adoptions Patch.esp

CRC: A4BB0BDA

KhajiitChildren.esp

CRC: 02BFCEF2

1poundbones.esp

CRC: A97783D7

RSChildren - Complete.esp

CRC: 487C81EE

Ark_PantherCompanion.esp

CRC: D35DCB76

Dogs-of-Skyrim.esp

CRC: 5421CE6D

Cats-in-SkyrimSSE.esp

CRC: B4789717

RSChildren - ACK.esp

CRC: D6D2EC0D

RSChildren_PatchUSSEP.esp

CRC: BAB63695

moonpath.esp

CRC: 18577F3E

vivid weathersse.esp

CRC: 8C347010

Bashed Patch, 0.esp

CRC: D428DF0D

 

 

Can someone please help me? I will take the steps necissary to help diagnose the problem but I don't know how to figure the problem out. I've tried disabling all my mods and it didn't work no matter what I did. (Except Nexus Overhaul mod, because I didn't want to loose my savegame.)

Everytime I walk in somewhere I fear my game will shut off. I have no idea why. I run a MSI gaming computer with Windows 10.

Any help would be greatly appreciated. I attempted to put this in MOD help but now that I think of it I think it fits better here.

 

 

 

 

Short of being a mind reader no one can know your technical specs.. that would be the logical first step.

[Kievawolf]

I am using WryeBash, NMM, and launching the game several different ways including on Steam. My game is located in D:\Jasmine\Documents\Steam\steamapps\common\Skyrim Special Edition .

I have a MSI Gaming computer, Processor Intel® Core i7-6700HQ CPU @ 2.60GHz, 2601 Mhz, 4 Core(s), 8 Logical Processor(s), Running Windows 10...

BIOS Version/Date American Megatrends Inc. E16K2IMS.106, 7/14/2016

Embedded Controller Version 255.255

BIOS Mode UEFI

BaseBoard Manufacturer Micro-Star International Co., Ltd.

Hardware Abstraction Layer Version = "10.0.14393.206"

Installed Physical Memory (RAM) 16.0 GB

Total Physical Memory 15.9 GB

Available Physical Memory 11.5 GB

Total Virtual Memory 18.2 GB

Available Virtual Memory 13.3 GB

Page File Space 2.38 GB

Is there any other information you need?

[Reynard131]

 

I am using WryeBash, NMM, and launching the game several different ways including on Steam. My game is located in D:\Jasmine\Documents\Steam\steamapps\common\Skyrim Special Edition .

I have a MSI Gaming computer, Processor Intel® Core i7-6700HQ CPU @ 2.60GHz, 2601 Mhz, 4 Core(s), 8 Logical Processor(s), Running Windows 10...

BIOS Version/Date American Megatrends Inc. E16K2IMS.106, 7/14/2016

Embedded Controller Version 255.255

BIOS Mode UEFI

BaseBoard Manufacturer Micro-Star International Co., Ltd.

Hardware Abstraction Layer Version = "10.0.14393.206"

Installed Physical Memory (RAM) 16.0 GB

Total Physical Memory 15.9 GB

Available Physical Memory 11.5 GB

Total Virtual Memory 18.2 GB

Available Virtual Memory 13.3 GB

Page File Space 2.38 GB

Is there any other information you need?

 

 

 

 

 

What GPU is on it ?

[Kievawolf]

Intel® HD Graphics 530. Hybrid Graphics GPU: Discrete.

64 Bit operating System, x64 Based processor.

Anything else you need? I apologize for the lack of information on my part. I don't mean to be difficult.

[Reynard131]

Intel® HD Graphics 530. Hybrid Graphics GPU: Discrete.

64 Bit operating System, x64 Based processor.

Anything else you need? I apologize for the lack of information on my part. I don't mean to be difficult.

 

 

 

Please Review Your Tech Specs with the Requirements for SSE..

[Kievawolf]

Sorry it's taking me so long to reply back, I've been busy in RL and away from the computer.

OS: Windows 10 Home 64-bit (10.0, Build 14393) (14393.rs1_release.170602-2252)

Processor: Intel® Core i7-6700HQ CPU @ 2.60GHz (8 CPUs), ~2.6GHz

Memory (RAM): 16 GB, 15.9 GB usable.

Graphics: Intel® HD Graphics 530 , (NVIDIA) GeForce GTX 1060.

C: Has 50.4 Free of 117 GB, D: has 775 GB freeof 914 GB.

Is this better? :sweat:

[Reynard131]

Sorry it's taking me so long to reply back, I've been busy in RL and away from the computer.

OS: Windows 10 Home 64-bit (10.0, Build 14393) (14393.rs1_release.170602-2252)

Processor: Intel® Core i7-6700HQ CPU @ 2.60GHz (8 CPUs), ~2.6GHz

Memory (RAM): 16 GB, 15.9 GB usable.

Graphics: Intel® HD Graphics 530 , (NVIDIA) GeForce GTX 1060.

C: Has 50.4 Free of 117 GB, D: has 775 GB freeof 914 GB.

Is this better? :sweat:

 

 

Thanks

 

 

Sounds like the GTX 1060 is not enabled, and you are running on the Integrated graphics.

 

 

 

You need to look at NV control panel and make sure GTX 1060 GPU is enabled and listing TESV.exe as a 3D application.

 

if that isn't done you need to add it.

[Kievawolf]

I cannot find TESV.exe but I added Skyrim. I went to Configure Surround,PhysX, and put my PhysX settings to GTX 1060... Is that how you enable it? Should I check the box called Dedicate to PhysX?

I went to Manage 3D Settings and went to Skyrimse.exe and it says use Global Settings, which is Nvidia GPU. It says Specify settings for this program:

Greyed Out - Ambient Occlusion - Not supported for this application

Anisotropic Filtering - Use global setting (application-controlled)

Antialiasing - FXAA - Use global setting (off)

Antialiasing - Gamma correction - Use global setting (On)

Antialiasing - Mode - Use global setting (application Controlled)

Greyed Out - Antialiasing - Setting - Use global setting (application controlled)

Antialiasing - Transparency - Use global setting (Off)

CUDA - GPUs - Use global setting (All)

Maximum Pre-Rendered Frames - Use global setting (Use the 3D application...)

Multi-Frame Samples AA (MFAA) - Use global setting (off)

Multi-Display/Mixed-GPU acceleration - Use global setting (Multiple display perfor...)

Power Management Mode - Use global setting (optimal power)

Shader Cache - Use global setting (on)

Texture Filtering - Anisotropic Sample Opti- Use Global Setting (off)

Texture Filtering - Negative LOD bias - Use Global setting (allow)

Texture Filtering - Quality Use global setting (quality)

Texture Filtering - Trilinear Optimization - Use global setting (on)

Threaded Optimization - Use global setting (Auto)

Triple buffering - Use global setting (off)

Vertical Sync - Use global setting (Use the 3D application...)

Virtual Reality Pre-rendered frames - Use global setting (1)

 

Afterwards I went into the game into the Forksgerr mine and my game still blacked out and exited.

[BlueGunk]

First up I doubt there is anything wrong with your rig.

 

Here are two screenshots that should help you with NVidia Control Panel set up (in Win 10 accessible in the bottom right of the toolbar pile of bits somewhere...)

https://ibb.co/fvai9a
https://ibb.co/k9PbUa

 

Since you can launch and use the game, my experience with this sort of crash came through Skybound Watch Pass near Helgen, where the damn game just flat crashed if I tried to enter the dungeon in the north or south entrance.

The crash was similar to yours: instant black screen and then desktop. I never traced the fault, doing all the usual removing mods (etc). My suspicion is that there was a bad mesh installation in the basic game files but tracing it was impossible.

 

In the end I re-installed the game and my mods, and that completely cleared the problem.

 

Another thought is: have you the game installed on your C: program files location? That can cause a lot of issues and it is advisable to move the game to another install location.

 

Also, make sure your anti-virus is set to avoid checking files on the fly for the Skyrim folders - make it an exception. That activity can cause a number of issues.

 

Hope this offering might be of some value!