JoanPesci Posted November 16, 2017 Share Posted November 16, 2017 (edited) Hello Folks! I really need your help. Today, when I started to playing Skyrim SE, it was everything OK. But later I reinstall Hearthfire Multiple Adoptions mod. When I did so, I set the the .esp in the load order, where it was before. After this, I get CTD's. First in Dragonsreach, when I wanted to go from a room to the War room. And then it happens again, when I wanted to wait in the great hall, after I load a previous save game. I opened a previous safe game, where I was outside - far away from Whiterun - I tried quicksave and it comes CTD again. I didn't know what happened, because I just reinstall one mod, what was installed before. I run Loot, I run again FNIS and I don't know now that what happens. My load order - newest:Skyrim.esm=1Update.esm=1Dawnguard.esm=1HearthFires.esm=1Dragonborn.esm=1Unofficial Skyrim Special Edition Patch.esp=1ClimatesOfTamriel.esm=1SexLab.esm=1ApachiiHair.esm=1ApachiiHairMales.esm=1ApachiiHairFemales.esm=1Apachii_DivineEleganceStore.esm=1SMIM-SE-Merged-All.esp=1SkyUI_SE.esp=1ClimatesOfTamriel-Nights-L2.esp=1RLO - Interiors.esp=1ClimatesOfTamriel-Interiors-Warm.esp=1TW3Eyes.esp=1MagicalCollegeofWinterhold.esp=1RLO - Effects.esp=1RLO - Illuminated Spells.esp=1BarenziahQuestMarkers.esp=1DragonBoneEbonsteel.esp=1beltfastenedquivers.esp=1RichMerchantsSkyrim_x5.esp=1Book Covers Skyrim.esp=1Dawnstar.esp=1RLO - Exteriors.esp=1Joy of Perspective.esp=1SLPleasure.esp=1Basic Pregnancy Cycle.esp=1YOT - Your Own Thoughts.esp=1tcbm.esp=1Ordinator - Perks of Skyrim.esp=1Thunderchild - Epic Shout Package.esp=1morthal.esp=1AsharaRomanticOutfit.esp=1HearthfireMultiKid.esp=1HearthfireMultiKid_LastName.esp=1ObedientUlfric.esp=1SGEyebrows.esp=1SIDT - Special Edition.esp=1Shout.esp=1SIDT_Thunderchild-Patch.esp=1Realistic-Voice.esp=1UnreadBooksGlow.esp=1IcePenguinWorldMap.esp=1Immersive Sounds - Compendium.esp=1TrueStormsSE.esp=1TSCoT.esp=1RealRainSECoT.esp=150 More Perk Points.esp=1Dawnguard Delayed - Level 30.esp=1Dragonborn Delayed - After Dragonslayer.esp=1ArcheryDummyXP.esp=1Kato's Falkreath.esp=1JKs Whiterun.esp=1TKAA.esp=1JK's Riverwood.esp=1BecomeKingofSkyrim.esp=1Run For Your Lives.esp=1RLO - JK's Whiterun.esp=1DiversifyingSkyrim.esp=1GQJ_DG_vampireamuletfix.esp=1Dovahkiin prayer.esp=1FNIS.esp=1FNISspells.esp=1XPMSSE.esp=1Schlongs of Skyrim - Light.esp=1SolsticeCastle.esp=1EnhancedCharacterEdit.esp=1Apachii_DivineEleganceStore_Patch.esp=1SpousesEnhanced.esp=1The Paarthurnax Dilemma.esp=1RLO - JK's Riverwood.esp=1Shiva's Vanilla Clothing Replacer.esp=1UNP Vanilla Outfits.esp=1Tiwa44_SpiceGear_UNP_SE.esp=1Tiwa44_SpiceGear_UNPB.esp=1DecoratorHelper.esp=1Dark Face Bug Fix.esp=1CharacterMakingExtender.esp=1NewUlfric.esp=1BPC_SkyUI.esp=1BPC_Dialogue.esp=1BPC_DiversifyingSkyrim.esp=1BPC_SexLabSE.esp=1BPC_TKAA.esp=1Immersive Citizens - AI Overhaul.esp=1RLO - IC Patch.esp=1AmazingFollowerTweaks.esp=1Relationship Dialogue Overhaul.esp=1RDO - AFT v1.66 Patch.esp=1RDO - USSEP Patch.esp=1FNISSexyMove.esp=0marriagemod - alpha v3.esp=0marriagemod - hf.esp=0 I think maybe my load order, but I'm not sure. My Papyrus log says this:[11/16/2017 - 07:46:21PM] VM is freezing...[11/16/2017 - 07:46:21PM] VM is frozen Can someone help me, that what should I do, that the game can running again good or where should I looking for the error/errors? Thanks so much for everyone. Edited November 16, 2017 by JoanPesci Link to comment Share on other sites More sharing options...
twowolves80 Posted November 16, 2017 Share Posted November 16, 2017 I don't know what VM is, but sure, I'll take a crack at it. Have you run WryeBash? Orange boxes are bad, mm'kay? lol Easy to fix, though. And WryeBash is one way of verifying LOOT's accuracy.Generally, the consensus on a CTD on a quicksave is the RAM/VRAM use. Most times this is the culprit in this type of CTD. And just in case it was something so simple it was overlooked--did you install the x64 bit version of Hearthfires Multiple Adoptions? I use that mod, too. I just had to ask, though. lol Sometimes, it's a case of Why isn't my computer running? Uh, did you plug it in? :PSeriously, though, what's your system specs? Let's eliminate that possibility first because it's easy. Did you run LOOT after installing it? You'll want to run WryeBash to make sure it's not orange.Hoping it's something simple for you. Link to comment Share on other sites More sharing options...
JoanPesci Posted November 17, 2017 Author Share Posted November 17, 2017 (edited) Thanks for your answer. Yes I did run Loot and yes I use x64bit version of it. I just reinstall in the NMM and that is. My System Spec.: (under Win7 Ultimate) Motherboard: Asus M5A97 EVO R2.0Processor: OctalCore AMD FX-8320, 3700 MHzMemory: Kingston KVR16LN11/8Video Card: GIGABYTE GTX960 4GB GDDR5 PCIE The System Specs it's fine, that's what I'm sure about it. I install and run WryeBash then, I see what it says. If the game is CTD again, I begin a new game. I tried yesterday, I can quicksaving in new game. Thanks. Edited November 17, 2017 by JoanPesci Link to comment Share on other sites More sharing options...
twowolves80 Posted November 17, 2017 Share Posted November 17, 2017 (edited) No problem. Pay it forward.Oh, so you can quicksave now, no problem? If so, those are the best kinds of problems--the ones that go away on their own. lol And hopefully never come back.Yeah, you've got plenty of memory it looks like, so it's not a RAM or VRAM issue which eliminates other possibilities, too, so that's good. The less variables there are when troubleshooting, the better.I'd still run WryeBash, though, just to be on the safe side. I'd also consider running Skyrim Performance Monitor in the background (you can turn the UI on or off in-game), and that will tell you all the information you need as far as VRAM useage, FPS, etc. Then, if it CTDs, you'll have a better chance of knowing why if you see something happen in the telemetry.The only other possibility I can think of is that perhaps something in the INIs are jacked up. Or it's trying to save to an invalid save path. You didn't touch your save folder, did you? I'd recommend BethINI for dealing with your INIs and cleaning up the stuff left behind by Bethesda (including invalid entries in the SkyrimPrefs.ini). Hopefully, this helps!EDIT: Also, apparently VM is frozen is just anything that pauses the game. That's why you'll get that in the papyrus log. Here is the link I found that at. :smile: Edited November 17, 2017 by twowolves80 Link to comment Share on other sites More sharing options...
JoanPesci Posted November 17, 2017 Author Share Posted November 17, 2017 OK, I try it. Thanks a lot :) Link to comment Share on other sites More sharing options...
twowolves80 Posted November 17, 2017 Share Posted November 17, 2017 No problem! I'll keep an eye on this thread so if you post back, I'll see it. Crossing my fingers it's just a simple fix. lol Link to comment Share on other sites More sharing options...
Recommended Posts