JamiePHearn Posted March 4, 2013 Share Posted March 4, 2013 OK, my patience for this game is is about at a -1 right now. I have had this game for a while now, but only recently i have started to mod it. I have been following along with some videos by a guy named GophersVids on YouTube. But now, i want to start a new game with all my mods active. But heres my problem, after the intro, the birth scene starts, i cry and everyone comes into view. But after that, my dad just stands there not saying anything. I can still whine and my head is still moving around, it's just that nobodys talking or anything. Also as a side note, i have other saves that i can go to and play on them, and i don't experience any crashes or freezes there. So i go online looking for solutions. What i have done so far is edit the fallout.ini by changing bUseThreadedAI=0 to =1 then adding iNumHWThreads=1 (or 2) underneath. But seeing that that didn't do anything, i decided to try to update my game to the most recent patch, 1.7. But after the little install screen popped up and finished, it closes and nothing happens, it doesn't launch the game or anything. So, anyone got any ideas? Heres my load order on NMM:Fallout3.esmRH_IRONSIGHTS.esmahud.esmihud.esmCINEMATECH.esmImaginatorFO3.espRRCompanionVault.esmRR5MoreFemales.esmRR5MoreMales.esmRRGuards.esmEnhancedWeather - Rain and Snow.esmCRAFT.esmCALIBR.esmFO3 Wanderers Edition - MAin File.esmFO3 Wanderers Edition - Alternate Travel.espDarNifiedUIF3.espno blur on hit.espmuzzle with 100 radius lightening.espBetterGamePerformance.espDYNAVISION - Dynamic Lens Effect.espDirectors Chair - Fallout 3.espRRWastelandPosters.espRR Companions 200 Follow Distance.espRR Companions 250 Follow Distance.espRR Companions 300 Follow Distance.espRR Companions 100 Follow Distance.espFellout-Full.espEnhancedWeather - Rain and Snow in Fallout.espEnhancedWeather - REBOOT.espEnhancedWeather - Sneak Bonus during Storms.espEnhancedWeather - Weather Sounds in Interiors.espWeaponModKits.espRH_IronSights_RemoveReticule.espRH_IronSights_Basic_VanillaPlugin.espRH_FWE_Bridge.espRH_WMK_Bridge.espFO3 Wanderers Edition - Main File.espFO3 Wanderers Edititon - Optional Restore Tracers (automatics only).espFO3 Wanderers Edition - Optional Restore Tracers.espCALIBRxMerchant.esp And my system:NVIDIA GeForce 6150 SEWindows Vista HOme Premium 64-Bit service pack1AMD Phenom X4 9150e Quad-Core4GB RAM500 GB hard drive Link to comment Share on other sites More sharing options...
M48A5 Posted March 4, 2013 Share Posted March 4, 2013 To start, use only one of these: RR Companions 200 Follow Distance.esp, RR Companions 250 Follow Distance.esp, RR Companions 300 Follow Distance.esp, RR Companions 100 Follow Distance.esp. Use only one of these: FO3 Wanderers Edititon - Optional Restore Tracers (automatics only).esp or FO3 Wanderers Edition - Optional Restore Tracers.esp. Don't worry about having your mods active during the beginning cut scene. Start a new game with no mods. Play through until the Birthday party and make a hard save. Exit the game and enable your mods and re-enter the game at your save. This should allow you to finish in Vault 101 and exit. I also suggest you make the game Large Address Aware: http://fallout3.nexusmods.com/mods/6510 Be sure you follow the instructions to the letter. When you get to the load screen, look to the lower left and it tell you the version of the game. And make sure you changed the correct .ini. The one in C:\Users\ "name"\Documents\My Games\Fallout3. You will know you have the right one when you see the folder "Saves" You should have your game installed in a location other than Program Files. The UAC in Vista will mess with your ability to access the game with mods. Link to comment Share on other sites More sharing options...
JamiePHearn Posted March 5, 2013 Author Share Posted March 5, 2013 OK, my patience for this game is is about at a -1 right now. I have had this game for a while now, but only recently i have started to mod it. I have been following along with some videos by a guy named GophersVids on YouTube. But now, i want to start a new game with all my mods active. But heres my problem, after the intro, the birth scene starts, i cry and everyone comes into view. But after that, my dad just stands there not saying anything. I can still whine and my head is still moving around, it's just that nobodys talking or anything. Also as a side note, i have other saves that i can go to and play on them, and i don't experience any crashes or freezes there. So i go online looking for solutions. What i have done so far is edit the fallout.ini by changing bUseThreadedAI=0 to =1 then adding iNumHWThreads=1 (or 2) underneath. But seeing that that didn't do anything, i decided to try to update my game to the most recent patch, 1.7. But after the little install screen popped up and finished, it closes and nothing happens, it doesn't launch the game or anything. So, anyone got any ideas? Heres my load order on NMM:Fallout3.esmRH_IRONSIGHTS.esmahud.esmihud.esmCINEMATECH.esmImaginatorFO3.espRRCompanionVault.esmRR5MoreFemales.esmRR5MoreMales.esmRRGuards.esmEnhancedWeather - Rain and Snow.esmCRAFT.esmCALIBR.esmFO3 Wanderers Edition - MAin File.esmFO3 Wanderers Edition - Alternate Travel.espDarNifiedUIF3.espno blur on hit.espmuzzle with 100 radius lightening.espBetterGamePerformance.espDYNAVISION - Dynamic Lens Effect.espDirectors Chair - Fallout 3.espRRWastelandPosters.espRR Companions 200 Follow Distance.espRR Companions 250 Follow Distance.espRR Companions 300 Follow Distance.espRR Companions 100 Follow Distance.espFellout-Full.espEnhancedWeather - Rain and Snow in Fallout.espEnhancedWeather - REBOOT.espEnhancedWeather - Sneak Bonus during Storms.espEnhancedWeather - Weather Sounds in Interiors.espWeaponModKits.espRH_IronSights_RemoveReticule.espRH_IronSights_Basic_VanillaPlugin.espRH_FWE_Bridge.espRH_WMK_Bridge.espFO3 Wanderers Edition - Main File.espFO3 Wanderers Edititon - Optional Restore Tracers (automatics only).espFO3 Wanderers Edition - Optional Restore Tracers.espCALIBRxMerchant.esp And my system:NVIDIA GeForce 6150 SEWindows Vista HOme Premium 64-Bit service pack1AMD Phenom X4 9150e Quad-Core4GB RAM500 GB To start, use only one of these: RR Companions 200 Follow Distance.esp, RR Companions 250 Follow Distance.esp, RR Companions 300 Follow Distance.esp, RR Companions 100 Follow Distance.esp. Use only one of these: FO3 Wanderers Edititon - Optional Restore Tracers (automatics only).esp or FO3 Wanderers Edition - Optional Restore Tracers.esp. Don't worry about having your mods active during the beginning cut scene. Start a new game with no mods. Play through until the Birthday party and make a hard save. Exit the game and enable your mods and re-enter the game at your save. This should allow you to finish in Vault 101 and exit. I also suggest you make the game Large Address Aware: http://fallout3.nexusmods.com/mods/6510 Be sure you follow the instructions to the letter. When you get to the load screen, look to the lower left and it tell you the version of the game. And make sure you changed the correct .ini. The one in C:\Users\ "name"\Documents\My Games\Fallout3. You will know you have the right one when you see the folder "Saves" You should have your game installed in a location other than Program Files. The UAC in Vista will mess with your ability to access the game with mods.Thanks for the advice, i'll try all this out and check back with you.Fingers crossed! Link to comment Share on other sites More sharing options...
JamiePHearn Posted March 5, 2013 Author Share Posted March 5, 2013 OK, my patience for this game is is about at a -1 right now. I have had this game for a while now, but only recently i have started to mod it. I have been following along with some videos by a guy named GophersVids on YouTube. But now, i want to start a new game with all my mods active. But heres my problem, after the intro, the birth scene starts, i cry and everyone comes into view. But after that, my dad just stands there not saying anything. I can still whine and my head is still moving around, it's just that nobodys talking or anything. Also as a side note, i have other saves that i can go to and play on them, and i don't experience any crashes or freezes there. So i go online looking for solutions. What i have done so far is edit the fallout.ini by changing bUseThreadedAI=0 to =1 then adding iNumHWThreads=1 (or 2) underneath. But seeing that that didn't do anything, i decided to try to update my game to the most recent patch, 1.7. But after the little install screen popped up and finished, it closes and nothing happens, it doesn't launch the game or anything. So, anyone got any ideas? Heres my load order on NMM:Fallout3.esmRH_IRONSIGHTS.esmahud.esmihud.esmCINEMATECH.esmImaginatorFO3.espRRCompanionVault.esmRR5MoreFemales.esmRR5MoreMales.esmRRGuards.esmEnhancedWeather - Rain and Snow.esmCRAFT.esmCALIBR.esmFO3 Wanderers Edition - MAin File.esmFO3 Wanderers Edition - Alternate Travel.espDarNifiedUIF3.espno blur on hit.espmuzzle with 100 radius lightening.espBetterGamePerformance.espDYNAVISION - Dynamic Lens Effect.espDirectors Chair - Fallout 3.espRRWastelandPosters.espRR Companions 200 Follow Distance.espRR Companions 250 Follow Distance.espRR Companions 300 Follow Distance.espRR Companions 100 Follow Distance.espFellout-Full.espEnhancedWeather - Rain and Snow in Fallout.espEnhancedWeather - REBOOT.espEnhancedWeather - Sneak Bonus during Storms.espEnhancedWeather - Weather Sounds in Interiors.espWeaponModKits.espRH_IronSights_RemoveReticule.espRH_IronSights_Basic_VanillaPlugin.espRH_FWE_Bridge.espRH_WMK_Bridge.espFO3 Wanderers Edition - Main File.espFO3 Wanderers Edititon - Optional Restore Tracers (automatics only).espFO3 Wanderers Edition - Optional Restore Tracers.espCALIBRxMerchant.esp And my system:NVIDIA GeForce 6150 SEWindows Vista HOme Premium 64-Bit service pack1AMD Phenom X4 9150e Quad-Core4GB RAM500 GB To start, use only one of these: RR Companions 200 Follow Distance.esp, RR Companions 250 Follow Distance.esp, RR Companions 300 Follow Distance.esp, RR Companions 100 Follow Distance.esp. Use only one of these: FO3 Wanderers Edititon - Optional Restore Tracers (automatics only).esp or FO3 Wanderers Edition - Optional Restore Tracers.esp. Don't worry about having your mods active during the beginning cut scene. Start a new game with no mods. Play through until the Birthday party and make a hard save. Exit the game and enable your mods and re-enter the game at your save. This should allow you to finish in Vault 101 and exit. I also suggest you make the game Large Address Aware: http://fallout3.nexusmods.com/mods/6510 Be sure you follow the instructions to the letter. When you get to the load screen, look to the lower left and it tell you the version of the game. And make sure you changed the correct .ini. The one in C:\Users\ "name"\Documents\My Games\Fallout3. You will know you have the right one when you see the folder "Saves" You should have your game installed in a location other than Program Files. The UAC in Vista will mess with your ability to access the game with mods.Thanks for the advice, i'll try all this out and check back with you.Fingers crossed!Thank you sooooo much! Your advice worked like a charm. I guess all this time it was just me being super oblivious. You just made my day. Link to comment Share on other sites More sharing options...
ysmir1337 Posted June 14, 2016 Share Posted June 14, 2016 same exact thing is happening to me and i dont even have mods... Link to comment Share on other sites More sharing options...
Recommended Posts