num1sailingnut

So I found the CTD cure all thread and tried the first few steps (disable all mods and delete any extraneous folders) and that worked! I also noticed a small side-effect where my UI after the initial game load where you can select new game or continue is different. Previously it had very small text and how it ms much more readable. I had played with some other UI mods for triple wide screen and there must have been some leftover "gunk." It's really odd because it has been this way for a LONG time while I have played and it just caught up with me. Many thinks to @BlindLookout for the great thread and what I am sure was a LOT of time spent banging a head against the wall to figure it all out!

Thanks for the suggestion! I was JUST able to get back to this and with Def_UI disabled I get a CTD when loading my save. If I re-enable it, I can load the save but still CTD when activating the workshop. The order of plugins I listed above is incorrect. The unofficial fallout 4 patch is the first thing loaded after the main game and all of the DLC. I did notice one thing when running LOOT and that is that LOOT shows the unofficial patch as being an esp not esm. Here is my load order as shown by LOOT: 0 0 Fallout4.esm 1 1 DLCRobot.esm 2 2 DLCworkshop01.esm 3 3 DLCCoast.esm 4 4 DLCworkshop02.esm 5 5 DLCworkshop03.esm 6 6 DLCNukaWorld.esm 7 7 Unofficial Fallout 4 Patch.esp DLCUltraHighResolution.esm 8 8 WET.esp 9 9 WET Clearer.esp 10 a EveryonesBestFriend.esp 11 b RichMerchants.esp 12 c Perk Magazine Material Fix.esp 13 d Lush Landscapes.esp 14 e UNnaked Power Armor.esp 15 f SkjAlert_All_DLC.esp 16 10 nvvault1080.esp 17 11 BBS000-F04-MANDATORY-CVCW-DEF_UI.esp One thing that I think could be causing a problem is the DLCUltraHighResolution.esm. I realize it's not being loaded, but when I saw that there it rang a bell and I seem to remember downloading that around the time the problem started. The only problem is I'm not sure how to completely remove that from the files. I also tried having LOOT sort my plugins and I still have the same problem. Here's the sorted order: 0 0 Fallout4.esm 1 1 DLCRobot.esm 2 2 DLCworkshop01.esm 3 3 DLCCoast.esm 4 4 DLCworkshop02.esm 5 5 DLCworkshop03.esm 6 6 DLCNukaWorld.esm 7 7 Unofficial Fallout 4 Patch.esp DLCUltraHighResolution.esm 8 8 WET Clearer.esp 9 9 EveryonesBestFriend.esp 10 a RichMerchants.esp 11 b Perk Magazine Material Fix.esp 12 c Lush Landscapes.esp 13 d UNnaked Power Armor.esp 14 e SkjAlert_All_DLC.esp 15 f nvvault1080.esp 16 10 WET.esp 17 11 BBS000-F04-MANDATORY-CVCW-DEF_UI.esp

Hi all, The title says nearly everything. I am trying to capture my 1st settlement for the raiders in the home sweet home quest. I persuaded the settlers to leave and when I try to craft the flag, I get a CTD when activating the workshop. I have tried disabling nearly every mod that might have some interaction. Here's the list of mods I have installed and the ones struck through are ones that I have tried disabling. Am I missing one that could interact that I didn't try disabling? Perk Magazine Material Fix (v1.0)Unofficial Fallout 4 Patch (v2.0.0)Rich Merchants (v1.1)Everyone's Best Friend (v2.0.0)Lush Landscapes - Dried Edition (v2.0)WET (v1.73)ETSGS (v1.2)Nuka-World Map With Marked Locations (v1.2)Shaikujin's Better Warning for settlements being attacked (v5.1)Vault 1080 (v15)Bhaal's Better Sorting (v5.32)Clean Power Armor HUD (v1.1b)Color Map 4K with Locations (v2.0)Configurable New Dialog (v0.7)DEF_UI (v1.4.0)Achievements (v1.0.4)Thanks in advance for any and all help!

Thanks!

Well, I found my sound problem right after posting this. I had the "Overwolf" program running and once it got it's "hooks" into FO4, the sound shut off. It was never an issue in the past and I kind of liked it's FPS display, but no great loss! I still have the ESC key issue, but that's not quite as bothersome. Also going to see if I have any other stuff running trying to "help" me with my games.

Hi all! I played FO4 5 days ago and everything was working just peachy. I got back to playing today and crazy issues! When I start the game I have the sound playing at the main menu. When I load a saved game, there is no sound at all. Also when at the main menu the ESC key works as it should in various menus. After loading a save the ESC key no longer brings up the menu. The only thing that changed (that I know of) is that I installed the latest version of NMM. It does not seem reasonable to me that NMM caused this issue but it is the only thing that changed. I'm quite certain that the main game did not auto update (yeah I've been meaning to turn that off!) because I'm running F4SE and it always complains after the game updates and I have to downloat the compatible version. Any help is appreciated! TIA :dance:

Dubious, Thanks for a VERY informative response! I really appreciate it! :dance:

Hi, I'm wondering if game saves become "dependent" on texture pack mods. The reason I'm asking is that I play on two systems. (A high powered desktop and a low powered laptop when I'm traveling.) I want to install NMC's texture pack on my desktop rig to make things look SO much better, but I don't want my game saves being "tied" to having that mod installed and thereby killing my ability to play on my laptop. Thanks!

Thanks for the confirmation! The side monitors look a bit strangely stretched, but I'm hoping that others way smarter than I am will figure that out! But for now, it looks plenty playable!

Has anyone been able to test wide screen play on a PC? I'm running a triple monitor setup at 5760x1080 and wondered if it is well supported or not. TIA!

Finally got around to installing the SLEEP patch and still have the exact same CTD. I also installed SIMM from a downloaded file instead of using NMM just to be sure. I'm thinking that my next step will be to remove every mod and then install them one by one in the proper load order. My guess is that when I installed a mod I had one overwrite something that it should not have done and that's what has everything screwed up. Just to double check, when installing in the proper load order, if there are any notifications about overwriting existing files I should take the version from the mod I am installing instead of the previously installed version.

I have not yet been aboe to find a download link for the USLEEP patch, but I did reload SIMM and still the same result. I do still need to try downloading it via "regular" means and installing it. When I dlwnloaded and installed it there were several prompts about other mods modifying certain files. I aaccepted all changes from SIMM. (Hoping that was correct!)

I've done some more testing in hopes that it will be of use. First off my problems are occurring in the Dragonborn DLC My save starts in Tel Mithryn If I walk toward Nchardak from there I get a CTD after traveling a fair distance. If I fast travel to the Sun Stone I can walk a short distance toward Nchardak before CTD If I fast travel to Raven Rock I can walk around anywhere in the town without CTD If I fast travel to Kagrumez I get an immediate CTD

Well, I seem to have completely buggered something up. :wallbash: Now I get CTD right as the game tries to render the game after loading a save. (I do see the "loading" screen between picking my save and the game starting from the save.) I reverted the esm's I edited and no luck, so I want back to the original load order I posted and still no luck. Wrye Bash thinks that everything is perfect for the save I'm trying to load. I then realized that the save I was using was done with the esp's in place that I edited. I want back to an older save and I'm right back to having a CTD after moving some distance from where the save starts. This is with the load order suggested by SMB92. (Thanks for that!) When I went back to put the load order back to the suggestion I noticed that the SkyFalls mods were not in that order. Based on that they are currently at the end of my order. I'm hoping that's not the right place for them! :laugh:

So, I reverted all of the ESMs I edited back to their original versions. I also enabled tracing to see if that could shed any light on things. Now when I run the game it does a CTD as soon as the save file is loaded. (I never even see the game render a scene.) The info in the logs does not seem to indicate a smoking gun (to my eye) but here is the log in case the way smarter than me people here can find anything.

I was running ENB but not anymore. I don't think I'm running out of memory because I have 16GB. (Not sure how much TES5 can address.) I should also mention that this all started AFTER I upgraded to the latest NMM. I had to basically re-install all of my mods because of the new profile capability. My guess is that I did something wrong in the re-install process that is causing this.

Thanks for ordering my mods! Unfortunately even with them reordered I'm still getting the crash. :wallbash: Any suggestions on other troubleshooting steps?

So I did a little research and the mods that we have in common are: ClimatesOfTamriel.esm Moss Rocks.espSkyFalls + SkyMills + DG + DB.espSMIM-Merged-All.espSkyUI.esp In doing that research I noticed that I have these 3 mods loaded: SkyFalls + SkyMills + DG + DB.espSkyFalls + SkyMills Dawnguard.espSkyFalls + SkyMills Dragonborn.esp I'm thinking based on the names that I only need the 1st one. Can anyone confirm? Thanks!

]I am having a similar problem. My game crashes in Dragonborn when I am outside moving. It seemed to always happen in the same location (basically distance traveled) I then noticed that Wrye Bash reported dirty edits in all of the DLC files and update.esm. I cleaned those and I got farther before the crash. Wrye Bash again and noticed UDTs in those same files so I cleaned those and still crashing at the same point. Load order output from LOOT:

Read the "how to ask for help" thread after posting here. (begs forgiveness!) Here is the LOOT report:

Hi all! I've encountered a nasty problem after installing the latest beta version of NMM. I'm in the middle of Dragonborn and whenever I travel too far from my last saved location Skyrim crashes. I was getting a warning about missing content in my saves so I installed Wrye bash and found that I had a couple of mods missing. (SkyFalls and SkyMills) I got that resolved and still I'm crashing. It does not seem to matter what quest I have active or the direction I travel. The save I'm starting from is located just outside of Neloth's house in Tel Mithryn if that matters. I know that more information will be required to troubleshoot but I was not certain exactly what would be required so I figured I'd not just vomit info here and just post what is requested by those WAY more knowledgeable than I! :D TIA!

OK, this is STRANGE! I followed all of the steps and when I started Skyrim it still started. My PC crashed while playing so I had to reboot and now when I start Skyrim Pure Vision ENB does not start! It seems that somehow something was cached. However the game is crashing a lot on me now. Time to go back and try to figure out what setting modifications I did and undo them! :sick:

Thanks for the suggestion, but unfortunately I did that per the instructions and no luck! :mad:

I tried out Pure Vision ENB and have had all kinds of problems wit hit because I'm also running a triple monitor AMD setup. I've followed all of the uninstall instructions on the mod page, but when I start the game it still enables ENB. Any help in fixing this or suggestions on how to troubleshoot why it keeps running is greatly appreciated! TIA!

Hi all, I just installed PureVision ENB and all of the mods listed in the instructions. I fear I went astray somewhere because I'm seeing most frames rendered fairly blurry and then a few frames mixed in where everything is clear as I would expect. Any ideas what this problem could be or how I would even go about troubleshooting it? Thanks in advance! I took a video with my phone, but it's not really clear and I can't attach it here because it's too big. If anyone is interested we can make arrangements to get the file.