SooperWood

You could always use the Fallout4ConfigTool (http://www.nexusmods.com/fallout4/mods/102/?). This will give you lots of options to edit your .inis while keeping the files read-only (so the launcher doesnt resets any changes). There is one option that add the complete line of mod folders to your fallout4.ini.

Use the 'Fallout4ConfigTool' (http://www.nexusmods.com/fallout4/mods/102/?) launch it anywhere (as administrator) and select 'set as default launcher' under the 'Settings' tab. You can also edit some parts of the .inis with this tool without changing the files from read only.

Playin on fullscreen or borderless windowed? Defintly will try your setup.

Yes for the UI there are parameters in the .inis (and it should be easy for modders to change positions of icons and such maybe even with simple text lines in the.ini) but not for the scopes as far as I know. They are most likely just fixed textures that might only change for resolution.

Ok, this looks like an issue that is unlikely to be resolved by .ini tweaks and more likely to be fixed by adjusted texture/overlay mods. So unfortunately I'm out of my depth here with my limited to non existent modding knowledge ;D.

Unfortunately I don't know how to fix it but I think the visual effect is the one used for the recon scopes (the one you use in the last image) so it looks like the effect somehow got stuck. Does it have that on older saves to before the bug started? EDIT: Just went in game and took some screenshots of the recon scope, does this look familiar? :D : http://imgur.com/a/Z4FB9 So do you use any SweetFX plug ins and or mods that change textures/meshes etc?

Well, so does the game start after that? And are non of the mods working ingame?

Well, there could´be an explanation for this, but first of all it would make sense to start a new character to see if it's working at all and verify game files just to make sure it's not something wrong with the files. Also does it work with older saves? If so it could be that this is somehow related to the quest 'Confidence Man' which involves the host of the radio station. And if I remember correctly when doing the quest/having the host follow you, the radio station is silent (which would make sense).

More info needed: - Resolution - FoV changes made - screenshot would also be very helpful to determine what 'break' exactly means in this case

All this uninstall/reinstall shouldn't always be necessary: 1. start by uninstalling all mods and manually delete all left over files (like .esp files and the'texture','mesh' etc. folders) in (...)/Fallout 4/Data. 2. delete the .ini files under (...)/Documents/my games/Fallout4/ and all files under C:\Users\UserName\AppData\Local\Fallout4 3. move Savefiles and or delete them from the original folder 4. validate game files 5. Start the launcher and make sur it automatically detects you settings. A normal uninstall reinstall mostly fixes nothing as the files causing problems are left alone as they are edited/added and will still be active after the new install. If something is corrupt and causes a CTD It's much more likely to be one of those lose files rather than an actual game file that cannot be repaired by verifying the game cache.

"TINKER,TINKER,TINKER.... Strong bored!"

You have to give a bit more information. First of all this looks like the power armor parts are stuck directly to your character. How did this happen? Does equipping/unequipping clothing/armor change anything (try to unequip the power armor in the inventory menu) ? Do you use any mods that alter anything power armor and or normal armor related (like the Power armor quick exit mod or the more armor slots mod)?

That's what I meant when saying 'in-game VSync' I used the 'Fallout4ConfigTool to edit the .ini; - doesn't have much options but always sets the .inis back to read-only - has a 'Play Game' button so it's perfect for tsts like this where I switch between borderless/fulsscreen Vsync lock on/off

Ok, didn't know about limiting to 58/59, I will try that. I will try to limit the frames with RivaTuner and will try out how the ENBoost forced VSync and the ingame VSync effect the performance/stutter And somehow even with all VSyncs off I don't experience any tearing, in fact since I got my new 1080p (60Hz) monitor I never had tearing issues (unlike with my old 1600x900 59Hz monitor <- was a pain in the ass to avoid tearing for that one). I will post my results here. I will have to try out more but wil definetly stick to the NVIDIA VSync as it makes the fps drops so much less noticeable (aiming down sights and looking around at 50 fps feels like 60fps). If anyone has more suggestions feel free to post and I will try it out ASAP.

Try these variations (not sure if it will work): 1. select your character -> 'setessential 0' 2.'setessential player 0' 3.'player.setessential 0' (all without the '...' -marks of course)

Hey guys, So I installed ENBoost (http://www.nexusmods.com/fallout4/mods/332/?) and everything worked fine, got a nice solid frame rate most of the time, but there are still problems that ENBoost didn't fix and I can't figure out hw to fix it myself; I just recently managed to make my color adjustment from the NVIDIA control panel persistent, even with fullscreen gaming (before it would always turn off when starting a fullscreen appllication). How I did it: So I changed Fallout 4 from borderless to fullscreen, disabled all vsync ingame/in enblocal and forced VSync via NVIDIA control panel (tripple buffer=off, prerendered frames=1). This made my game much smoother so dips down to 50 fps wouldn't cause stutter like they did in borderless (even after I installed ENBoost). But then again this left me with the known bug that in fullscreen mode you get terrible microstutters (not hardware related->persistent at 60fps) when strafing/circling. The two fixes for this, that I found were turning to borderless (want to avoid that) which gives me an overall more 'stuttery' experience or to add the line 'iFPSClamp=60' under [General] in the fallout4.ini but a lot of people report fps bugs with that (being stuck at terminal, slowdown etc.). So atm I'm not able to find a proper workaround using; -RivaTuner -> capping the frames at 60 for windowed borderless -> not so smooth feeling, -ENBoost using fpscap and or forcevsync in enblocal.ini -> same results as with RivaTuner/ingame VSync (slightly better fps than with ingame VSync), -NVIDIA VSync (tripple buffer off, prerendered frames=1), -ingame VSync (ipresentInterval), borderless windowed/fullscreeen mode All got major advantages and disadvantages. So, is somebody here able to run this game full screen without micro stutters?

Thanks bben46 I will try that one as soon as I have another 4 hours left for downloading :biggrin: . Also I'm very sorry to tell you that I forgot to mention one thing that could be very important: My hardrive is partitioned into C:/ and D:/ and C is where my OS is and D is where my Skyrim is. I don't think I had this partition when I last played and that could be the problem. I will try bven46s solution and I will try to install Skyrim on C:/. This will probably take 2 or 3 days (since I do not have a lot of time right now) but I will leave a notification if it works or not here. Thanks for all the great respond.

For your Skyrim version: 1.Go to you're Skyrim folder for example: C:\ProgramFiles\Steam\SteamApps\common\Skyrim 2. Look for the TESV.exe 3. Right-click TESV.exe and select "Properties" 4.Look into the "Details" section, that's where you find the version number which should be "1.9.32.0" Here's a picture (sorry it's in german): http://www10.pic-upload.de/thumb/15.07.13/sg8itge8jtzj.jpg For SKSE: 1. Go to: http://skse.silverlock.org/ 2. Download the "Installer" (this will give you a file called "skse_1_06_16_installer.exe") http://www10.pic-upload.de/thumb/15.07.13/5ay61kvjmep.jpg 3. Run "skse_1_06_16_installer.exe" and follow the instructions (enter your Skyrim installation folder path (with the TESV.exe inside, same one as above)) 4. Now go to your Skyrim folder and you will see, that there is a new .exe called "skse_loader.exe" 5.This is your new "start button": By executing the skse_loader.exe Skyrim will load with SKSE active, so do not use Steam or the SkyrimLauncher.exe to start your game from then. If you want to have a nice shortcut for your SKSE loader do this: 1. create a shortcut of skse_laoder.exe 2. Drag and drop the shortcut where you want it (2.5 Rename it to whatever you want) 3. Right-click the shortcut and select "Properties" 4. Go into the "Shortcut" section and click "Change Icon" 5. In the new window that pops up click browse, and direct it to your Skyrim folder and select TESV.exe or SkyrimLauncher.exe as a new icon 6. Press "OK" and you will have a nice SKSE loader shortcut that just looks like the original TESV.exe ; ) Another german picture for this: http://www10.pic-upload.de/thumb/15.07.13/xwutsztybxbe.jpg

Looks like you copied the link out of you're own video ulpoad section because when I click the link that's where I get: My own uploaded videos but not yours. Maybe you could fix that because I'm really interested in your song.

Deactivating the DLCs did not help. I tried these three loadorders:

Oh yes I did, there was no sign of Skyrim on my PC except for the icon in my Steam library.

Well, I don't thin it is helpful to post the logs here since there is nothing significant at the ends and they are long as hell >:( . I just cannot figure out what it is. It just seems like such afundamental problem like incompability of hardware or OS or other programs, but the weird thing is that I did already run skyrim on this computer with all the same stuff on it :ermm: . EDIT: And Yes, I just found the emoticon section in the reply box :geek: .

Here it is, from UESPWiki: resetinterior <cellid> Reset an entire cell. This command will reset an entire dungeon or location to default, including monsters, traps, chests and loot. E.g., ResetInterior Stillborncave01 or ResetInterior 00015206 would reset the dungeon Stillborn Cave to default; all monsters, traps, and loot would be respawned. If you reset a cell you have just been to, you'll need to use pcb command (purge cell buffer) as well, or the game will reload the buffered version of the cell, with all the modifications you've made to it. Both editorID and formID are acceptable in this command. I think that's it. My google search was: "dungeon reset skyrim" it was the third entry.

Is there maby a crashlog tool for Skyrim out there? Some tool that just logs everything that happens?

I did a clean reinstall with everything deleted (2 days ago, 2 times yesterday and today). Verifying the game cache did not help either(0 missing files).