Skyrim crashes outdoors with enb

[Dovakinax]

Hello to all. So my problem is that when I am playing with some enbs (NLA, T.A.Z., Dovah Nakiin), I can't load a safe where I am outdoor or just exit from interior to exterior. Skyrim crashes after a few seconds of a loading screen without any errors. But if i am playing with Grim and Somber enbs or with Kountervibe enb, skyrim runs smoothly without any errors. Maybe someone in this forum knows how to get rid of this problem, because I like T.A.Z enb but I simply can't play with it.

[fiewiel]

nla, taz and the other enb use an additional .esp

Maybe thats the reason.

[Dovakinax]

nla, taz and the other enb use an additional .esp

Maybe thats the reason.

Hm, it doesn't matter, if I disable .esp or not, the game still crashes.

[saurusmaximus]

What do you have for a video card and are you sure your enblocal is configured correctly?

[BlackShruikan]

The size of your last save ?

[Dovakinax]

What do you have for a video card and are you sure your enblocal is configured correctly?

I have 2 gtx 780ti and yes, I configured enblocal correctly.

 

The size of your last save ?

Around 11 mb.

[fiewiel]

Compared to NLA, Kountervibe is a very ressourcehungry enb. If you can play with Kounter but not with NLA it means that your enbsettings are not correct.

Post enblocal.ini for Kounter and NLA. Also how much vram has a single 780ti?

[Dovakinax]

Compared to NLA, Kountervibe is a very ressourcehungry enb. If you can play with Kounter but not with NLA it means that your enbsettings are not correct.

Post enblocal.ini for Kounter and NLA. Also how much vram has a single 780ti?

Hm, maybe enblocal.ini is the reason. NLA and T.A.Z don't come with enblocal.ini file by default. It is created after I ran the game. Gtx 780ti has a 3 gb of vram.

 

This is enblocal.ini file from Grim and Somber Sheogorath enb (I use this enb now and skyrim runs fine with it):

//

// Grim and Somber Default (template) enblocal file

// by WolfGrimDark

// last updated: 2015.03.24

//

// NOTE: Be sure to edit values below for your computer setup

//

[PROXY]

EnableProxyLibrary=true

InitProxyFunctions=true

ProxyLibrary=d3d9_SMAA.dll

[GLOBAL]

UsePatchSpeedhackWithoutGraphics=false

UseDefferedRendering=true

IgnoreCreationKit=true

[PERFORMANCE]

SpeedHack=true

EnableOcclusionCulling=true

EnableZPrepass=false

[MULTIHEAD]

ForceVideoAdapterIndex=false

VideoAdapterIndex=0

//

// Be sure to set thes values for your computer

// see this page for help: http://home.comcast.net/~thunor/images/hosted/config/memory.html

//

[MEMORY]

ExpandSystemMemoryX64=true

ReduceSystemMemoryUsage=true

DisableDriverMemoryManager=false

DisablePreloadToVRAM=false

EnableUnsafeMemoryHacks=false

ReservedMemorySizeMb=768

VideoMemorySizeMb=10240

EnableCompression=true

AutodetectVideoMemorySize=false

[WINDOW]

ForceBorderless=false

ForceBorderlessFullscreen=false

// Enable or disable Vsync depending on your own requirements

[ENGINE]

ForceAnisotropicFiltering=true

MaxAnisotropy=16

ForceLodBias=true

LodBias=-0.4

AddDisplaySuperSamplingResolutions=false

EnableVSync=true

VSyncSkipNumFrames=0

[LIMITER]

WaitBusyRenderer=false

EnableFPSLimit=false

FPSLimit=60.0

//

// I use SHIFT plus CONTROL to open the ENB GUI

// If you want to use SHOFT plus ENTER then make KeyEditor=13 (13 is enter key, 17 is control key)

//

[iNPUT]

//shift

KeyCombination=16

//f12

KeyUseEffect=123

//home 36 disabled 0

KeyFPSLimit=0

//num 106

KeyShowFPS=106

//print screen

KeyScreenshot=44

//shift and control to open GUI

KeyEditor=17

//f4

KeyFreeVRAM=115

[ADAPTIVEQUALITY]

Enable=false

Quality=1

DesiredFPS=20.0

[ANTIALIASING]

EnableEdgeAA=true

EnableTemporalAA=false

EnableSubPixelAA=true

EnableTransparencyAA=false

//

// Set FixParallaxTerrain=true if using primarily terrain textures designed for parallax

// Set FixLag=true if you are using an Nvidia card. May help or make worse, depends on your set up.

//

[FIX]

FixGameBugs=true

FixParallaxBugs=true

FixParallaxTerrain=true

FixAliasedTextures=true

IgnoreInventory=true

FixTintGamma=false

RemoveBlur=false

FixSubSurfaceScattering=true

FixSkyReflection=true

FixCursorVisibility=true

FixLag=true

[LONGEXPOSURE]

EnableLongExposureMode=false

Time=1.0

BlendMax=0.0

And this is enblocal.ini file from NLA (I just tweaked memory section and enabled fixlag):

[PROXY]

EnableProxyLibrary=false

InitProxyFunctions=true

ProxyLibrary=

[GLOBAL]

UsePatchSpeedhackWithoutGraphics=false

UseDefferedRendering=true

IgnoreCreationKit=true

[PERFORMANCE]

SpeedHack=true

EnableOcclusionCulling=true

[MULTIHEAD]

ForceVideoAdapterIndex=false

VideoAdapterIndex=0

[MEMORY]

ExpandSystemMemoryX64=false

ReduceSystemMemoryUsage=false

DisableDriverMemoryManager=true

DisablePreloadToVRAM=false

EnableUnsafeMemoryHacks=false

ReservedMemorySizeMb=768

VideoMemorySizeMb=10240

EnableCompression=false

AutodetectVideoMemorySize=true

[WINDOW]

ForceBorderless=false

ForceBorderlessFullscreen=false

[ENGINE]

ForceAnisotropicFiltering=true

MaxAnisotropy=16

ForceLodBias=false

LodBias=0.0

EnableVSync=true

AddDisplaySuperSamplingResolutions=false

VSyncSkipNumFrames=0

[LIMITER]

WaitBusyRenderer=false

EnableFPSLimit=false

FPSLimit=60.0

[iNPUT]

KeyCombination=16

KeyUseEffect=123

KeyFPSLimit=36

KeyShowFPS=106

KeyScreenshot=44

KeyEditor=13

KeyFreeVRAM=115

[ADAPTIVEQUALITY]

Enable=true

Quality=0

DesiredFPS=20.0

[ANTIALIASING]

EnableEdgeAA=true

EnableSubPixelAA=false

EnableTemporalAA=false

[FIX]

FixGameBugs=false

FixParallaxBugs=true

FixParallaxTerrain=true

FixAliasedTextures=true

IgnoreInventory=true

FixTintGamma=false

RemoveBlur=false

FixSubSurfaceScattering=true

FixSkyReflection=true

FixCursorVisibility=true

FixLag=true

[LONGEXPOSURE]

EnableLongExposureMode=false

Time=1.0

BlendMax=0.0

Edited August 15, 2015 by Dovakinax

[fiewiel]

ExpandSystemMemoryX64 should be false

 

You can simply copy the enblocal.ini from one enb to the next, only thing different is proxy and if the mod author wants something special.

 

As you wrote you didnt had an enblocal.ini for nla and taz its clear why they didnt work.

[Dovakinax]

ExpandSystemMemoryX64 should be false

 

You can simply copy the enblocal.ini from one enb to the next, only thing different is proxy and if the mod author wants something special.

 

As you wrote you didnt had an enblocal.ini for nla and taz its clear why they didnt work.

WOOOAHHH, Skyrim now runs with NLA in exteriors! Hm, never thought about that, thank you sooooooooo much for helping me) (Oh, seems like Skyrim still crashes with Dovah Nakiin but that's okay)

Edited August 16, 2015 by Dovakinax