TopSecretName Posted September 28, 2015 Share Posted September 28, 2015 (edited) I tried doing this myself but ended up failing miserably. My goal was to create a single Steel Nordic Gauntlet that takes up one of the 15 unused equipment slots that would be worn on the player's right hand. Mainly so that I could mask the incompatibility between the AC4 armor and this robotic arm gauntlet (link). Am I chasing ghosts here? Or is that an actual possibility? Edited September 28, 2015 by TopSecretName Link to comment Share on other sites More sharing options...
Faelrin Posted September 28, 2015 Share Posted September 28, 2015 Does the nif have the same number partition as the slot in the Creation Kit? To check just open your nif in nifskope, open the NiTriShape block, and click on the BSDismemberSkinInstance block. Under block details, open up the Partitions block. To the right of where it says Body Part it should have a number and name (example would be SBP_32_BODY) . Make sure this number and name matches the one you're using in the CK. This is assuming you already have the gauntlet by itself, and the most recent version of nifskope. If that does not work, let me know. Link to comment Share on other sites More sharing options...
TopSecretName Posted September 28, 2015 Author Share Posted September 28, 2015 (edited) Does the nif have the same number partition as the slot in the Creation Kit? To check just open your nif in nifskope, open the NiTriShape block, and click on the BSDismemberSkinInstance block. Under block details, open up the Partitions block. To the right of where it says Body Part it should have a number and name (example would be SBP_32_BODY) . Make sure this number and name matches the one you're using in the CK. This is assuming you already have the gauntlet by itself, and the most recent version of nifskope. If that does not work, let me know. Alrighty I gave that a try and it doesn't look like I can sever one of the gauntlets from the other. Any advice? Edited September 29, 2015 by TopSecretName Link to comment Share on other sites More sharing options...
Faelrin Posted September 29, 2015 Share Posted September 29, 2015 Oh you would need to remove one in a modeling program beforehand, before trying that. I could actually get that done for you though, since I have experience with blender and it would take me a few minutes to do so. Also what slot in the creation kit do you want it to use, because I'll make sure to have the partition set up for it before finishing it. Link to comment Share on other sites More sharing options...
TopSecretName Posted October 1, 2015 Author Share Posted October 1, 2015 Oh really? That'd be awesome! I'd like it to use slot 59. I appreciate your help dude. Link to comment Share on other sites More sharing options...
Faelrin Posted October 1, 2015 Share Posted October 1, 2015 Alright, I'll pm you with a link to it when its finished. Link to comment Share on other sites More sharing options...
4KINGSMance Posted November 11, 2016 Share Posted November 11, 2016 Hey there! I'm currently looking for precisely the same thing. Did you ever end up finishing this, and if so would you be so kind to share this with me too? :) Link to comment Share on other sites More sharing options...
Recommended Posts