Diabolico Posted August 20, 2016 Share Posted August 20, 2016 I have a problem with invisible obstacle/object at Sanctuary Hills. To make it more clear here is the picture:http://i.imgur.com/YWTimugl.jpg This object is located right in the middle of the container marked with orange line. Before i deleted old house this was the line of the exterior wall but aside of that nothing else. The object looks like some sort of small pillar and you can actually jump on it but nothing is located above or under this position. I tried to see if i can select this object, i even try to use the console but there is literally nothing. This must be some sort of vanilla bug and i'm not sure if is possible to sort. Still i would like to ask if anyone have any suggestion what i could try to delete this object (or whatever it is). Just to mention, i loaded new/fresh game with only Spring Cleaning mod and the object is still present so it is not connected with any mod and i doubt Spring Cleaning could be the cause. Like i said there is literally nothing at that position. Link to comment Share on other sites More sharing options...
JimmyRJump Posted August 20, 2016 Share Posted August 20, 2016 (edited) Maybe there is, but you just can't see it because it's not rendered properly thanks to a permanent form of LOD flicker, but without the flicker, if you still follow... Try installing "No More Disappearing Act" and see what gives... the latter is a mod that corrects pre-culling issues because of having scrapped items (with the like of Spring Cleaning or other Scrap Everythings) which normally cannot be scrapped and the game tries to render those... Edited August 20, 2016 by JimmyRJump Link to comment Share on other sites More sharing options...
Diabolico Posted August 20, 2016 Author Share Posted August 20, 2016 Didnt help. Still i cant see anything on that position. It could be that during the production of Sanctuary Hills they intend to put something there and then forgot or its just a leftover of some object. The object height is around half of the normal jump and it seems to be round or square but really small, width is maybe 1/3 (or even smaller) of one step. I can jump on it but if i try to step in any direction i will drop down on the floor. Link to comment Share on other sites More sharing options...
JimmyRJump Posted August 20, 2016 Share Posted August 20, 2016 Didnt help. Still i cant see anything on that position. It could be that during the production of Sanctuary Hills they intend to put something there and then forgot or its just a leftover of some object. The object height is around half of the normal jump and it seems to be round or square but really small, width is maybe 1/3 (or even smaller) of one step. I can jump on it but if i try to step in any direction i will drop down on the floor.Reminds me of one of the vendor stalls mods that did away with the vertical name panel on top to make the tier three stall fit underneath a ceiling/roof. They look great, but despite the panel being gone, when walking across the floor above the stall, you still get stuck trying to walk past the spot where the panel used to be, as if that panel was still there and sticking through the ceiling, but rendered invisible... Link to comment Share on other sites More sharing options...
JimmyRJump Posted August 20, 2016 Share Posted August 20, 2016 Wait a sec... sometimes objects' real size is larger than what you actually see: use the TCL command and have a look under ground at that spot.... Link to comment Share on other sites More sharing options...
Diabolico Posted August 20, 2016 Author Share Posted August 20, 2016 Reminds me of one of the vendor stalls mods that did away with the vertical name panel on top to make the tier three stall fit underneath a ceiling/roof. They look great, but despite the panel being gone, when walking across the floor above the stall, you still get stuck trying to walk past the spot where the panel used to be, as if that panel was still there and sticking through the ceiling, but rendered invisible... I have few mods like Homemaker, Better stores, SMH... but i tested them and they do not produce any bugs (at least for me). Second, i tested with fresh game and no mods aside of Spring Cleaning and this object is there. Wait a sec... sometimes objects' real size is larger than what you actually see: use the TCL command and have a look under ground at that spot....Used TCL right after i failed to find this object. I look up and under the ground but nothing there. Link to comment Share on other sites More sharing options...
TheGadget1945 Posted August 20, 2016 Share Posted August 20, 2016 I had this issue at Abernathy Farm when I deleted nearly everything inside the "house" but the wooden podium in the centre still showed as a solid object despite being invisible. Link to comment Share on other sites More sharing options...
Diabolico Posted August 20, 2016 Author Share Posted August 20, 2016 I had this issue at Abernathy Farm when I deleted nearly everything inside the "house" but the wooden podium in the centre still showed as a solid object despite being invisible.Looks like i must live with this bug. I built a bar at that position but probably i will just move entire building at some other place and current one leave empty. I will see if someone else come with some idea but right now doesnt look there is any solution for my problem. Link to comment Share on other sites More sharing options...
SirTwist Posted August 21, 2016 Share Posted August 21, 2016 Did you use markfordelete? If so, then you will have problems like this. Use one of the scrapping mods instead. Link to comment Share on other sites More sharing options...
JimmyRJump Posted August 21, 2016 Share Posted August 21, 2016 Did you use markfordelete? If so, then you will have problems like this. Use one of the scrapping mods instead.Been using markfordelete for ages and abundantly in around 4000hrs of gameplay in FO4 (currently on my 16th run-through, level 108 with 14days, 10hrs and 52mins of playing) for whatever object that can't be scrapped with Spring Cleaning and never ever encountered this situation... Link to comment Share on other sites More sharing options...
Recommended Posts