greyday01 Posted March 5, 2020 Share Posted March 5, 2020 I like built cells, houses, shops, ect., they make sense about what should go where. But I really struggle with caves especially if there are changes in level. It never seems that there are no kit pieces in the shapes that I have in mind. It is hard also to get a natural look without a million dirt piles and boulders stuck into it. Does anyone who is good at caves have any advice for someone who is struggling? I'm going to have to tear out 90% of my cell and start over because I just don't like it as it is. Unfortunately the cave is needed to get to my home so I'll have to make it. Link to comment Share on other sites More sharing options...
agerweb Posted March 8, 2020 Share Posted March 8, 2020 I have built many caves and to make sure they all don't look and feel the same you have to add sections that are not made with the pieces that are made to fit together. This is particularly true if you are changing levels. I use a combination of the flat Wall pieces, ramps, boulders and pillars to create rooms and descending passages; you just have to be careful to fill in all the gaps. Link to comment Share on other sites More sharing options...
greyday01 Posted March 8, 2020 Author Share Posted March 8, 2020 Yes. And all the little edges that stick out and you only see if you are crouching at a certain angle. Link to comment Share on other sites More sharing options...
Recommended Posts