Lex3x

I also cannot change mine for the same reasons. Tried different browsers, turning off adblockers, signing out and back in again... nothing's working. As soon as I hit the minimum 3 character limit it says whatever I typed in is a restricted word. EDIT: Tried again a couple hours later and it worked... idk man. Weird bug. lol

Still seeking help on this one, if anyone is able to figure it out... doesn't seem so, at this rate. x.x

Hey all. I've recently come back to the wonderful world of Skyrim and took the plunge from SLE to SSE and have been loving it so far. Unfortunately, about 100 mods in, I'm finally hitting some issues. I'm using a number of animation mods, so let me list them all here: FNIS (+ sexy move, PCEA2, creature pack and spells) - all working correctly Pretty Combat Animations - working correctly I also have CBBE + Bodyslide Studio and XPMSE skeleton. and most recently decided I wanted to try and add Pretty Female Idles... (important to note, when this one didn't work I attempted another idle animation mod... which suffers the exact same problem as PFI) So I'm using Mod Organizer 2 along with LOOT. I read mod descriptions and try to keep all my mods in as good an order as possible but maybe I messed up somewhere along the lines, idk... Pretty Female Idles and apparently no other idle mod will work for me. I found ONE way of making it work and that was to open up RaceMenu, change my gender and then back, reload my preset (to fix the uggo from gender swapping) and the animation plays just fine for all tested idle mods. However, this BREAKS the other animation mods. Everything reverts to vanilla. I find this really perplexing when I had no issues adding any other animation mod... Nothing seems to be overwriting the mods and the mods themselves are not overwriting others, either. So no conflicts. Does anybody have any idea what the issue could be here? It's probably something painfully obvious but I haven't modded in so long I may as well be considered fresh and new to it... Thanks everyone.

Thank you Euph. :) I'll give all that a shot. May be a while before I get back here to inform anyone that it works, since my CTD's tend to happen a few hours into the game but I'll be sure to give the results here when I'm able to finish testing. Again, much appreciated for the suggestions. I will definitely look into it!

I kind of figured it would come to that. I had hopes that something in my load order would be identified by somebody more knowledgeable on the matter than I am. Unfortunately, the amount of mods that I have and the amount of time (anywhere from 1-3 hours usually) of gameplay means that I'd be playing games without mods for quite some time before I figured out if it was working again or not. I guess I'm just going to have to toy around with xEdit and see if it's something I can figure out or... well. Deal with the CTD's. Thank you for your response though. It's better than nothing- and I don't mean that in an insulting way. lol

Still receiving crashes. This time while wandering the commonwealth and another just now when I was VATS targeting a robot enemy from automatron. CTD as soon as I hit e to fire it off. Getting really frustrating. Anybody have any ideas? I'm at a loss.

Alrighty... So I recently modded my FO4 and everything's been great, unfortunately I've been having a semi-rare CTD issue, usually within settlements and/or while in the building menu. I figure it's probably something I overlooked while installing all of them but I just can't figure out what the issue is. Hoping someone here can help me out. I'm almost certain it's one of those things where I skimmed over something important or failed to read something properly but... who knows. Description of the CTD: Random CTD (crash to desktop) 2-3 times just wandering around in Sanctuary- I haven't even build anything there yet. Twice while in build mode in Hangman's Alley- once in the actual area and once inside one of the basement bunkers from Basement Living mod. (I was receiving crashes before I installed this mod- FYI.) It may also be worth noting that my load order was fixed up by using the latest version of LOOT. My System Specs: Windows 10, MSI GT72S Dominator ProIntel® Core i7-6820HK CPU @ 2.70GHz 2.70GHzNVIDIA GeForce GTX 980M16.0GB RAM1TB Harddrive My Versions: All mods are updated to their most recent version, as is the game itself and all of the DLC's. Verify Cache reveals no problems and Fallout4.ini and Fallout4prefs.ini are edited appropriately, I believe...? I followed the guides for how to enable mods and all that, and all mods appear to be working as intended... which is making this CTD very difficult to track down... My Load Order: Ultimately, I feel it may have something to do with Homemaker or my load order... or maybe I just overlooked a patch somewhere or something? I'm really not sure. My CPU and memory while running the game are all MORE than okay, not even close to half capacity according to the monitor I have, so I don't think it's a memory issue. Anyone have any idea what could be causing this? It's a tough nut to crack... (...or maybe it's exceedingly simple and I'm just an idiot. >.>)

That seems to have done the trick! Muuuch less laggy now. Still have a few lag spikes here and there but I think that's partly due to my perhaps slightly unwise decision to lessen fog and such in the distance. Think I'm gonna re-enable that and get a little bit of my performance back. ^^; Thanks again!

Oh, awesome! I saw that mod on Google but passed it by thinking the HD bit implied it likely wouldn't have low-res texture options. That'll teach me not to make assumptions! Thanks ^^ I'm gonna give this a go and see if it doesn't make my travels in the forests less horrific. ;)

I didn't mean that to sound as if I was offended or anything! I was just saying. :) Really sorry if the way I wrote that implied otherwise.

A couple of places I visited said that if I install the ENBoost thing it could help out even if I'm not using an ENB. So far it's fixed my random CTD's so I think it did something right. :) And I know where to install textures and all, just wasn't able to find any "low res" tree textures to download or something. Unless removing the 2K HD LITE tree textures could somehow help... Not sure if deleting that would be a good or bad idea, though... Figure if I do that, it'd revert just the trees to their vanilla basics?

Hmm... alright, thanks for the info. I'm gonna hold off on installing all that just yet because I really don't have any desire to download HDT or the High Heels mod in general. I'd really just like to narrow down what might be causing this issue and if I can't get any other solutions I guess I'll give that a try. Thanks again. :)

Okay, so I have the mod Skyrim HD 2k Textures - LITE and it's great. All is lovely... however, I lag like all hell when in forested areas. No doubt because of the higher resolution graphics on the trees. Is there any way I could lower the resolution on trees or install some sort of... low res tree texture mod if there's even one out there? I don't want to remove the entire mod because everywhere else runs smoothly, it's just forested areas my computer can't seem to handle. Any ideas on how I might be able to fix this? ^^; Keep in mind, I'm running ENBoost (I don't actually use an ENB though) and a bunch of other stability/functionality type tweaks and all so I don't need any more of those... just need a way to lower the tree res or something without making them look TOO atrocious or removing them all together. I also prefer -not- to disable shadows from my game if I can help it- last resort.

HDT high heels, yes. The installer launches with several options of animation options with HDT High Heels being one of them. It's not specifically FOR that mod, just a bunch of Xp32's animation mods in one convenient installer to pick and choose from. I do not have it selected so my character shouldn't be having this hovering problem, I don't think... And I could use what to lower my character? Sorry if I misunderstood but I need a bit of specification there. ^^; If you mean RaceMenu, I tried messing with a few settings in there for the body scalers and can't find anything that brings me lower to the ground, unless you know which specific setting does the trick... :smile: Thank you anyway! Still need some help. ^^;

Okay, so... Let me start with my mod list (or those that I think matter for this): RaceMenu UNP BLESSED BODY- UNPB REDUX PROJECT XP32 Maximum Skeleton Extended XP32 New Animation Pack Dual Sheath Redux FNIS Pretty Female Idles My character always hovers a few inches above the ground no matter where I'm at. I realize that the skeleton I'm using, as well as the animation pack with it has a high heel mod but I did not select those options so it shouldn't be installed and... shouldn't be the issue, I'm assuming? When my character walks/runs I DO hear noises. I adjusted her height in RaceMenu and thinking that could possibly be the issue I set it back to default but that didn't change anything, either. I've google searched this issue for hours and just can't find anything. Hope someone can help me out here! If anyone reading this knows of any other mods that are known to cause this problem please list them here just in case it's one I have installed and wasn't aware could be causing this issue. Thanks! :smile:

That's exactly my issue, too. No clothes at the shop, or invisible clothes in game. The ACC instructions ARE confusing, but there are some instructions in the comments as well. Sadly I think they're outdated now, so they weren't any help. :( Still seeking an answer here. C'mon, people. Someone's gotta know! xD

Still need help. ><

Lemme know how that goes, ToppDog. Also, if you'd like, I can send you the latest version of ACC? I don't know if that's against the rules or what, but if not, I can. o.o I have dropbox.

Anyone? Still need help, haven't figured it out. :(

Okay, so I've read both mod pages as best as I possibly can, but apparently I'm still not doing something correctly? I've had this mod installed before, back at the 2.0 version when it was just up to 13 outfits instead of 21. I'd LIKE to have 21, but on the ACC page it says to use the 2.0 version of ACC if using the 2.0 version of Dovahkinder. Which I did, and it didn't work... I've tried about 10 different ways of installing these mods and I'm extremely frustrated. Nothing seems to be working. I also couldn't help but notice that it says to replace the .dds files with the textures you want replaced, but there are also n_dds files located in the Dovahkinder zip. What do I do with those? ACC says nothing about adding those to it. Do I need to install both ACC AND Dovahkinder in NMM or do I simply use the textures FROM Dovahkinder and place them into ACC then install ACC with NMM...? (Note: I AM using Hearthfire Multiple Adoptions.) Essentially, no matter HOW I install it (following tutorials) I can SEE the clothing in game, but when I give it to my children, they don't equip it. I'd like some help from anyone willing and able to give me a step by step on exactly which file to download, what to do with it, how to install it, and essentially anything I need to know to get this working. I don't know why I'm having trouble now when before, everything was fine... I'm using NMM, so please include mod load order if you can, or anything else I need to know.

I fixed it! Turns out I'm an idiot and did not properly uninstall DSR one of the many times I was trying... I forgot to do a clean save to stop running scripts and all that, and I guess that's what caused it. *facepalm* Thanks for your help, mello :)

Tried that. Still a no go... I really don't understand what the deal is. Every other left hand weapon shows up just fine. It's literally just the daggers. I even tested it with vanilla daggers / unmodded content and it's still not showing up. I've finally fixed my load order, Skyproc Patcher is running appropriately as well as FNIS with 0 error messages... I have no idea what's wrong here. I'm so frustrated at this point I'm about to give up. x_x

That actually helps a lot! Thank you so much! I can't believe after all the reading I did, I missed that. Yeesh. x.x Unfortunately though, I'm still only seeing ONE dagger. I adjusted all of the dagger settings, including the left one in the options but it's still invisble for whatever reason. I guess I'll have to tinker about with it some more until I figure out what's causing the issue. ><

Update: After further exploration into the issue, I was apparently using the wrong XPMS skeleton version, since its latest update. I fixed that now, and followed a few tutorials and got a LITTLE closer to fixing it, except now my problem is that I only see ONE dagger on my back while both are equipped. The left one isn't showing up, but the right one is. Animation is still correct. Sheathes are floating a tad too far away from my character's back despite selecting 'default XPMS' skeleton as I was supposed to while installing the mods. Not sure where to go from here.

EDIT: please see my update post directly below my original post to better understand my problem, as it's changed since my original post. Thanks! Okay, so I've watched about 50 billion tutorials despite being no novice at modding, and I've never had a problem getting dual swords to work either on my back or my hip, but for the first time I decided to try daggers on my character's back and to no avail... I'm using the XPMS Skeleton, Immersive Animations and Dual Sheath Redux-- each installed properly. I believe that somehow (no idea how though...) I'm screwing up the options when installing each one. I'm running the Dual Sheath Redux patch, then the FNIS patch, the esp is activated, I've VERY carefully read each option in each installation thing that should be giving me my daggers on my back, but nothing works. I've been at this for hours and I'm very frustrated at this point. Thing is, the ANIMATION for the daggers on the back is working just fine! However, I only see one dagger equipped on one hip when both daggers are equipped. I have no idea what I'm doing wrong, can somebody please help? ; n ;